DataSheet8.cn


PDF ( 数据手册 , 数据表 ) VLA303A-01R

零件编号 VLA303A-01R
描述 IPM POWER SUPPLY UNIT
制造商 Isahaya Electronics
LOGO Isahaya Electronics LOGO 


1 Page

No Preview Available !

VLA303A-01R 数据手册, 描述, 功能
HYBRID IC
VLA303A-01R
DESCRIPTION
The VLA303A-01R is an isolated DC-DC converter
designed to drive the IPM. 6 outputs can obtain from an
input of 140 to 380VDC. The terminals between input
and outputs, and each outputs are isolated.
OUTLINE DRAWING
1
IPM POWER SUPPLY UNIT
Dimensions: mm
Lot No
Pin No
35
FEATURES
•Input ------------140V to 380V DC
•Output-----------+15V, 50mA x3
+15V, 150mA x1
+12V, 400mA x1
+5V, 300mA x1
•Electrical isolation (between input and outputs)
------------- 1500Vrms 1 minute
•Electrical isolation (between each outputs)
------------- 1500Vrms 1 minute
APPLICATIONS
Power supply for IPM drive
18
82MAX
0.25
+0.20
-0.10
80.35
19
2.54
0.45+-00..1100
2.54 x17=43.18
3.5MAX
BLOCK DIAGRAM
18
Vin+ 17
16
12
Vin- 11
10
Control circuit
19 Vo1+
20 Vo1-
24 Vo2+
25 Vo2-
29 Vo3+
30 Vo3-
34 Vo4+
35 Vo4-
1 Vo5+
Vo6+
4
Vo5,6-
5







VLA303A-01R pdf, 数据表
HYBRID IC
VLA303A-01R
IPM POWER SUPPLY UNIT
FOR SAFETY USING
Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production,
and in it’s reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage.
When handling Hics, please note the following cautions.
CAUTIONS
Packing
Carrying
Storage
Extended storage
Maximum ratings
Polarity
The materials used in packing Hics can only withstand normal external conditions.
When exposed to outside shocks, rain and certain environmental contaminators, the packing
materials will deteriorates. Please take care in handling.
1) Don’t stack boxes too high. Avoid placing heavy materials on boxes.
2) Boxes must be positioned correctly during transportation to avoid breakage.
3) Don't throw or drop boxes.
4) Keep boxes dry. Avoid rain or snow.
5) Minimal vibration and shock during transportation is desirable.
When storing Hics, please observe the following notices or possible deterioration of their electrical
characteristics, risk of solderability, and external damage may occur.
1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must
not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius
with humidity at 40 to 60%.
2) Avoid locations where corrosive gasses are generated or where much dust accumulates.
3) Storage cases must be static proof.
4) Avoid putting weight on boxes.
When extended storage is necessary, Hics must be kept non-processed. When using Hics which
have been stored for more than one year or under severe conditions, be sure to check that the
exterior is free from flaw and other damages.
To prevent any electrical damages, use Hics within the maximum ratings. The temperaqture,
current, voltage, etc. must not exceed these conditions.
To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in
inserting leads into the board holes, conforming to the external view for the terminal arrangement.
8














页数 9 页
下载[ VLA303A-01R.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
VLA303A-01RIPM POWER SUPPLY UNITIsahaya Electronics
Isahaya Electronics

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap