DataSheet8.cn


PDF ( 数据手册 , 数据表 ) FB1A4A

零件编号 FB1A4A
描述 on-chip resistor NPN silicon epitaxial transistor
制造商 NEC
LOGO NEC LOGO 


1 Page

No Preview Available !

FB1A4A 数据手册, 描述, 功能
DATA SHEET
COMPOUND TRANSISTOR
FB1 SERIES
on-chip resistor NPN silicon epitaxial transistor
For mid-speed switching
FEATURES
• Up to 0.7 A current drive available
• On-chip bias resistor
• Low power consumption during drive
PACKAGE DRAWING (UNIT: mm)
QUALITY GRADES
• Standard
Please refer to “Quality Grades on NEC Semiconductor
Devices” (Document No. C11531E) published by NEC Corporation
to know the specification of quality grade on the devices and its
recommended applications.
FB1 SERIES LISTS
Products
Marking
FB1A4A
FB1L2Q
FB1A3M
FB1F3P
FB1J3P
FB1L3N
FB1A4M
P30
P31
P32
P33
P36
P34
P35
R1 (K)
0.47
1.0
2.2
3.3
4.7
10
R2 (K)
10
4.7
1.0
10
10
10
10
ABSOLUTE MAXIMUM RATINGS (Ta = 25°C)
Parameter
Symbol
Ratings
Unit
Collector to base voltage
VCBO
30
V
Collector to emitter voltage
VCEO
25
V
Emitter to base voltage
VEBO
10
V
Collector current (DC)
IC(DC)
0.7
A
Collector current (Pulse)
IC(pulse) *
1.0
A
Base current (DC)
IB(DC)
20
mA
Total power dissipation
PT
200
mW
Junction temperature
Tj
150
°C
Storage temperature
Tstg 55 to +150
°C
* PW10 ms, duty cycle50 %
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. D16180EJ1V0DS00 (1st edition)
Date Published April 2002 N CP(K)
Printed in Japan
©
21090928







FB1A4A pdf, 数据表
FB1 SERIES
The information in this document is current as of July, 2001. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data
books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products
and/or types are available in every country. Please check with an NEC sales representative for
availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
M8E 00. 4














页数 8 页
下载[ FB1A4A.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
FB1A4Aon-chip resistor NPN silicon epitaxial transistorNEC
NEC
FB1A4Mon-chip resistor NPN silicon epitaxial transistorNEC
NEC

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap