DataSheet8.cn


PDF ( 数据手册 , 数据表 ) NCX2222

零件编号 NCX2222
描述 Low voltage comparator
制造商 NXP Semiconductors
LOGO NXP Semiconductors LOGO 


1 Page

No Preview Available !

NCX2222 数据手册, 描述, 功能
NCX2222
Low voltage comparator; open-drain output
Rev. 1 — 20 December 2012
Product data sheet
1. General description
The NCX2222 provides a dual, low voltage, low-power comparator with open-drain
outputs.
The NCX2222 has a very low supply current of 5 A per comparator and is guaranteed to
operate at a low voltage of 1.3 V. It is fully operational up to 5.5 V which makes it
convenient for use in both 3.0 V and 5.0 V systems.
2. Features and benefits
Wide supply voltage range from 1.3 V to 5.5 V (functional operating range)
Rail-to-rail input/output performance
Very low supply current of 5 A (typical) per comparator
Very low-power consumption
No phase inversion with overdriven input signals
Internal hysteresis
Propagation delay of 0.8 s (typical)
ESD protection:
HBM JESD22-A114F Class 1C. Exceeds 1500 V
CDM JESD22-C101E exceeds 1000 V
Multiple package options
Specified from 40 C to +85 C
3. Applications
Cellular telephones
Alarm and security systems
Personal Digital assistants







NCX2222 pdf, 数据表
NXP Semiconductors
NCX2222
Low voltage comparator; open-drain output
13. Application information
13.1 Operating description
The NCX2222 is a dual, low voltage, low-power comparator with open-drain output. This
device is designed for use with a pull-up resistor to define the output switching levels. This
device consumes only 5 A per comparator of supply current while achieving a typical
propagation delay of 0.8 s at a 20 mV input overdrive. Figure 11 and Figure 12 show
propagation delay with various input overdrives. This comparator is guaranteed to operate
at a low voltage of 1.3 V up to 5.5 V. The common-mode input voltage range extends 0.1
V beyond the upper and lower rail without phase inversion or other adverse effects. This
device has a typical internal hysteresis of 9.0 mV which allows for greater noise immunity
and clean output switching.
13.2 Output stage
The NCX2222 has an N-channel output stage that has the capability of sinking the output
to VEE with a load ranging up to 5.0 mA (see Figure 13).
VCC
IN+
IN- output
VEE
aaa-000067
Fig 13. NCX2222 output configuration (one comparator)
13.3 Zero-crossing detector
Figure 14 shows the NCX2222 configured as a zero-crossing detector.
9&&
9&&
 P9
Fig 14. Zero-crossing detector
538
,1 287
,1 1&;
DDD
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
8 of 18







NCX2222 equivalent, schematic
NXP Semiconductors
NCX2222
Low voltage comparator; open-drain output
17. Legal information
17.1 Data sheet status
Document status[1][2]
Objective [short] data sheet
Preliminary [short] data sheet
Product [short] data sheet
Product status[3]
Development
Qualification
Production
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[1] Please consult the most recently issued document before initiating or completing a design.
[2] The term ‘short data sheet’ is explained in section “Definitions”.
[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
17.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
17.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
NCX2222
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2012
© NXP B.V. 2012. All rights reserved.
16 of 18










页数 18 页
下载[ NCX2222.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
NCX2220Low voltage comparatorNXP Semiconductors
NXP Semiconductors
NCX2222Low voltage comparatorNXP Semiconductors
NXP Semiconductors

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap