|描述||Power MOSFET ( Transistor )|
Qg (Max.) (nC)
VGS = - 10 V
Lead (Pb)-free and Halogen-free
a. See device orientation.
• Halogen-free According to IEC 61249-2-21
• Surface Mount
• Available in Tape and Reel
• Dynamic dV/dt Rating
• Fast Switching
• Ease of Paralleling
• Simple Drive Requirements
• Compliant to RoHS Directive 2002/95/EC
The Power MOSFETs technology is the key to Vishay’s
advanced line of Power MOSFET transistors. The efficient
geometry and unique processing of the Power MOSFETs
design achieve very low on-state resistance combined with
high transconductance and extreme device ruggedness.
The D2PAK (TO-263) is a surface mount power package
capable of accommodating die sizes up to HEX-4. It
provides the highest power capability and the lowest
possible on-resistance in any existing surface mount
package. The D2PAK (TO-263) is suitable for high current
applications because of its low internal connection
resistance and can dissipate up to 2.0 W in a typical surface
ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted)
Continuous Drain Current
Pulsed Drain Currenta
Linear Derating Factor
VGS at - 10 V
TC = 25 °C
TC = 100 °C
Linear Derating Factor (PCB Mount)e
Inductive Current, Clamp
Maximum Power Dissipation
Maximum Power Dissipation (PCB Mount)e
Peak Diode Recovery dV/dtc
TC = 25 °C
TA = 25 °C
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature)
for 10 s
a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 5).
b. Not Applicable
c. ISD - 3.5 A, dI/dt 95 A/μs, VDD VDS, TJ 150 °C.
d. 1.6 mm from case.
e. When mounted on 1” square PCB (FR-4 or G-10 material).
- 55 to + 150
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 91083
S11-1051-Rev. C, 30-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
1 Document Number: 91000
|下载||[ SiHF9620S.PDF 数据手册 ]|
|SiHF9620||Power MOSFET ( Transistor )|
|SiHF9620S||Power MOSFET ( Transistor )|
|STK15C88||256-Kbit (32 K x 8) PowerStore nvSRAM|
|NJM4556||DUAL HIGH CURRENT OPERATIONAL AMPLIFIER|
New Japan Radio
|EL1118-G||5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER|
|www.DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap|