|
|
零件编号 | AM-800480L6TMQW-00H | ||
描述 | LCD Module | ||
制造商 | Ampire | ||
LOGO | |||
1 Page
SPECIFICATIONS FOR
LCD MODULE
CUSTOMER
CUSTOMER PART NO.
AMPIRE PART NO. AM-800480L6TMQW-00H
APPROVED BY
DATE
Approved For Specifications
Approved For Specifications & Sample
AMPIRE CO., LTD.
Building A., 4F., No.116, Sec. 1, Sintai 5th Rd., Xizhi Dist,
New Taipei City 221, Taiwan (R.O.C.)
新北市汐止區新台五路一段 116 號 4 樓(東方科學園區 A 棟)
TEL:886-2-26967269 , FAX:886-2-26967196 or 26967270
APPROVED BY
CHECKED BY
ORGANIZED BY
Date : 2012/8/9
AMPIRE CO., LTD.
1
www.avnet-embedded.eu
6. BLOCK DIAGRAM
800 (RGB)×480 TFT LCD Panel
Gate IC
HX8662-C
Source IC
HX8258-A
Source IC
HX8258-A
R[7:0]
G[7:0]
B[7:0]
DE CLK
VBL + VBL -
Date : 2012/8/9
AMPIRE CO., LTD.
8
www.avnet-embedded.eu
11.3Storage precautions
1) Avoid a high temperature and humidity area. Keep the temperature between 0°C and
35°C and also the humidity under 60%.
2) Choose the dark spaces where the product is not exposed to direct sunlight or
fluorescent light.
3) Store the products as they are put in the boxes provided from us or in the same
conditions as we recommend.
11.4 Operating precautions
1) Do not boost the applied drive voltage abnormally. Failure to do so may break ICs.
When applying power voltage, check the electrical features beforehand and be
careful. Always turn off the power to the LC module controller before removing or
inserting the LC module input connector. If the input connector is removed or inserted
while the power is turned on, the LC module internal circuit may break.
2) The display response may be late if the operating temperature is under the normal
standard, and the display may be out of order if it is above the normal standard. But
this is not a failure; this will be restored if it is within the normal standard.
3) The LCD contrast varies depending on the visual angle, ambient temperature, power
voltage etc. Obtain the optimum contrast by adjusting the LC dive voltage.
4) When carrying out the test, do not take the module out of the low-temperature space
suddenly. Failure to do so will cause the module condensing, leading to malfunctions.
5) Make certain that each signal noise level is within the standard (L level: 0.2VCC or
less and H level: 0.8VCC or more) even if the module has functioned properly. If it is
beyond the standard, the module may often malfunction. In addition, always connect
the module when making noise level measurements.
6) The CMOS ICs are incorporated in the module and the pull-up and pull-down function
is not adopted for the input so avoid putting the input signal open while the power is
ON.
7) The characteristic of the semiconductor element changes when it is exposed to light
emissions, therefore ICs on the LCD may malfunction if they receive light emissions.
To prevent these malfunctions, design and assemble ICs so that they are shielded
from light emissions.
8) Crosstalk occurs because of characteristics of the LCD. In general, crosstalk occurs
when the regularized display is maintained. Also, crosstalk is affected by the LC drive
voltage. Design the contents of the display, considering crosstalk.
Date : 2012/8/9
AMPIRE CO., LTD.
16
www.avnet-embedded.eu
|
|||
页数 | 19 页 | ||
下载 | [ AM-800480L6TMQW-00H.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
AM-800480L6TMQW-00H | LCD Module | Ampire |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |