DataSheet8.cn


PDF ( 数据手册 , 数据表 ) MVH-170UI

零件编号 MVH-170UI
描述 DIGITAL MEDIA RECEIVER Operation Manual
制造商 Pioneer
LOGO Pioneer LOGO 


1 Page

No Preview Available !

MVH-170UI 数据手册, 描述, 功能
DIGITAL MEDIA RECEIVER
AUTORADIO NUMÉRIQUE DE MÉDIA
RICEVITORE MULTIMEDIALE DIGITALE
RECEPTOR DIGITAL DE MEDIOS
DIGITALER MEDIA RECEIVER
DIGITAL MEDIA RECEIVER
ЦИФРОВОЙ МУЛЬТИМЕДИЙНЫЙ ПРИЕМНИК
MVH-X370BT
MVH-170UI
MVH-170UBG
MVH-170UB
Operation Manual
Mode d’emploi
Manuale d’istruzioni
Manual de instrucciones
Bedienungsanleitung
Handleiding
Руководство пользователя







MVH-170UI pdf, 数据表
The following operations are still accessible from the unit, even if the control mode is set to
[CONTROL iPod/CTRL iPod].
– Pause, fast forward/reverse, song/chapter selection
The volume can only be adjusted from the unit.
About MIXTRAX (USB/iPod only)
(Only for MVH-X370BT)
The MIXTRAX function creates a non-stop mix of your music library, accompanied by
illumination effects. For details on MIXTRAX settings, see page 13.
NOTES
This function is not compatible with an Android device connected via MTP.
When USB is selected as a source and the MIXTRAX function is in use, the sound retriever function is
disabled.
Depending on the file/song, sound effects may not be available.
Turn the MIXTRAX function off if the illumination effects it produces interfere with driving.
1 Press 3/MIX to turn MIXTRAX on/off.
Bluetooth
(Only for MVH-X370BT)
Bluetooth connection
Important
If three or more Bluetooth devices (e.g. a phone and separate audio player) are connected, they may
not work properly.
1 Turn on the Bluetooth function of the device.
2 Press and hold
to display the connection menu.
3 Turn the M.C. dial to select [ADD DEVICE], then press to confirm.
The unit starts to search for available devices, then displays them in the device list.
To cancel searching, press the M.C. dial.
If the desired device is not in the list, select [RE-SEARCH].
If there is no device available, [NOT FOUND] appears in the display.
4 Turn the M.C. dial to select a device from the device list, then press to confirm.
Press and hold the M.C. dial to switch the displayed device information between the
Bluetooth device address and device name.
5 Select [Pioneer BT Unit] shown in the device display.
8 En
6 Make sure the same 6-digit number appears on this unit and the device, then
select “Yes” on the device.
NOTES
[DEVICE FULL] appears if the unit has already been paired with three other devices. In this case, delete
one of the paired devices. See [DEL DEVICE] or [GUEST MODE] in the connection menu (page 8).
Depending on the device, the PIN code is required in step 6. In this case, input [0000].
TIP
The Bluetooth connection can be also made by detecting the unit from the Bluetooth device. To do so,
[VISIBLE] in the connection menu needs to be set to [ON]. For details on a Bluetooth device operations,
refer to the operating instructions supplied with the Bluetooth device.
Connection menu
Menu Item
DEVICELIST
Description
Display the list of paired Bluetooth devices. “*” appears on the
device name when the Bluetooth connection is established.
DEL DEVICE
[DELETE YES],
[DELETE NO]
ADD DEVICE
Delete the device information.
Register a new device.
A.CONN
[ON], [OFF]
VISIBLE
[ON], [OFF]
PIN CODE
DEV. INFO
GUEST MODE
[ON], [OFF]
Select [ON] to connect to a Bluetooth device automatically.
Select [ON] so that a Bluetooth device can detect the unit when
the unit is connected via Bluetooth to another device.
Change the PIN code.
1 Press the M.C. dial to display the setting mode.
2 Turn the M.C. dial to select a number.
3 Press the M.C. dial to move the cursor to the next position.
4 After inputting the PIN code, press and hold the M.C. dial.
After inputting the PIN code, pressing the M.C. dial returns you
to the PIN code input display, and you can change the PIN code.
Switch the device information on the display between the
device name and Bluetooth device address.
Select [ON] to move to the [DEL DEVICE] screen automatically
when the unit has already been paired with three devices.







MVH-170UI equivalent, schematic
NOTES
Change the initial menu of this unit. Refer
to [SP-P/O MODE] (page 5). The
subwoofer output of this unit is
monaural.
When using a subwoofer of 70 W (2 Ω), be
sure to connect the subwoofer to the
violet and violet/black leads of this unit.
Do not connect anything to the green
and green/black leads.
Power amp (sold separately)
Perform these connections when using the
optional amplifier.
– it may interfere with operation of the
vehicle.
– it may cause injury to a passenger as a
result of a sudden stop.
The semiconductor laser will be damaged
if it overheats. Install this unit away from
hot places such as near the heater outlet.
Optimum performance is
obtained when the unit is
installed at an angle of less
than 60°.
When installing, to ensure proper heat
dispersal when using this unit, make sure
you leave ample space behind the rear
panel and wrap any loose cables so they
are not blocking the vents.
Leave ample 5 cm
space
System remote control
Power amp (sold separately)
Connect with RCA cables (sold
separately)
To front output*
Front speaker*
To rear output or subwoofer output
Rear speaker or subwoofer
* Only for MVH-X370BT/170UI
Installation
Important
Check all connections and systems before
final installation.
Do not use unauthorized parts as this
may cause malfunctions.
Consult your dealer if installation requires
drilling of holes or other modifications to
the vehicle.
Do not install this unit where:
5 cm
DIN front/rear mount
This unit can be properly installed using
either front-mount or rear-mount
installation.
Use commercially available parts when
installing.
DIN Front-mount
1 Insert the mounting sleeve into the
dashboard.
For installation in shallow spaces, use
the supplied mounting sleeve. If there is
enough space, use the mounting sleeve
that came with the vehicle.
16 En
2 Secure the mounting sleeve by using a
screwdriver to bend the metal tabs
(90°) into place.
Using the included bracket
You can also use the included bracket to
mount the unit. Check to make sure that
the included bracket matches your
particular model of vehicle and then attach
it to the unit as shown below.
Dashboard
Mounting sleeve
Make sure that the unit is installed
securely in place. An unstable
installation may cause skipping or other
malfunctions.
DIN Rear-mount
1 Line up the holes on the mounting
bracket with the holes on the sides of
the unit to attach the bracket.
2 Screw in one screw on each side to
hold the unit in place.
Tapping screw (5 mm × 8 mm)
Mounting bracket
Dashboard or console
Screw
Bracket
Removing the unit
1 Remove the trim ring.
Trim ring
Notched tab
Releasing the front panel allows easier
access to the trim ring.
When reattaching the trim ring, point
the side with the notched tab down.










页数 30 页
下载[ MVH-170UI.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
MVH-170UBDIGITAL MEDIA RECEIVER Operation ManualPioneer
Pioneer
MVH-170UBGDIGITAL MEDIA RECEIVER Operation ManualPioneer
Pioneer
MVH-170UIDIGITAL MEDIA RECEIVER Operation ManualPioneer
Pioneer

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap