DataSheet8.cn


PDF ( 数据手册 , 数据表 ) FX1-144P-1.27DS

零件编号 FX1-144P-1.27DS
描述 1.27mm Pitch Connector
制造商 Hirose Electric
LOGO Hirose Electric LOGO 


1 Page

No Preview Available !

FX1-144P-1.27DS 数据手册, 描述, 功能
1.27mm Pitch Connector
FX1 Series
DIN duplex density mount has been achieved.
(DIN 96 contacts and FX1 192 (96x2)
sFeatures
1. High density and space saved-DIN Duplex Mount Achieved
The alignment of the mating area in 4-row allows to duplex the
number of contacts in the nearly equivalent mount square as for
the conventional DIN connector.(Refer to photo (1).)
2. High Current and High Voltage
Two-thirds of total contact numbers are used for half pitch
signaling contact, while the other one-third thereof is used for the
power ground contact. Power ground contact corresponds to
high current (1A) and high voltage (250V).
3. Sequence Structure
Considering insertion/extraction in active power mode and
maintenance on the end user side, the FX series is designed in a
mechanism that can afford the time different contact at three
steps. (For details, refer to Figure (2) as shown on the right.)
FX1V (3 step sequence)
Mating
Power
Supply
Removal
Ground
Signal
4. Mis-insertion Prevent
Provide the insertion guide on both ends of connector, and widen
an inductive area in order to prevent mis-insertion.
Sequence Structure
(Pin contact sequence)
Photo 1
Figure 2
*FX1 Series (2 step sequence)
1 Row B
2 Row A, row C
*FX1 Series (3 step sequence)
1 B1 to B4, B45 to B52, B93 to B96
2 B5 to B44, B53 to B92
3 Row A, row C
Setting row B to ground, if active cable insertion and
extraction are performed as power supply, arc will
occur between contact and contact. The row B
contact structure is constructed to separate arc
occurrence point a and normal contact point b, and
minimizes affects on the contact.
A134







FX1-144P-1.27DS pdf, 数据表
BPrecautions
1. Soldering
(1)In the case of manual soldering, complete services under the condition of soldering iron bit temperature below 300ç for
2 seconds max. Please be sure to coat the contacts with solder so that no force is given.
(2)In the case of dip soldering bath, complete service under the condition of soldering iron bit temperature below 260ç for
5 seconds max.
2. Prefixed function
If the prefixed function is required, please use to the board prefixed pin type.
A141














页数 8 页
下载[ FX1-144P-1.27DS.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
FX1-144P-1.27DS1.27mm Pitch ConnectorHirose Electric
Hirose Electric
FX1-144P-1.27DSA1.27mm Pitch ConnectorHirose Electric
Hirose Electric
FX1-144P-1.27DSAL1.27mm Pitch ConnectorHirose Electric
Hirose Electric
FX1-144P-1.27DSL1.27mm Pitch ConnectorHirose Electric
Hirose Electric

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap