DataSheet8.cn


PDF ( 数据手册 , 数据表 ) HWD810

零件编号 HWD810
描述 3-Pin Microprocessor Reset Circuits
制造商 Chengdu Sino Microelectronics System
LOGO Chengdu Sino Microelectronics System LOGO 


1 Page

No Preview Available !

HWD810 数据手册, 描述, 功能
3-Pin Microprocessor Reset Circuits
General Description
The HWD803/HWD809/HWD810 are microprocessor (µP)
supervisory circuits used to monitor the power supplies
in µP and digital systems. They provide excellent circuit
reliability and low cost by eliminating external compo-
nents and adjustments when used with +5V, +3.3V,
+3.0V, or +2.5V powered circuits.
These circuits perform a single function: they assert a
reset signal whenever the VCC supply voltage declines
below a preset threshold, keeping it asserted for at
least 140ms after VCC has risen above the reset thresh-
old. Reset thresholds suitable for operation with a vari-
ety of supply voltages are available.
The HWD803 has an open-drain output stage, while the
HWD809/HWD810 have push-pull outputs. The
HWD803’s open-drain RESET output requires a pull-up
resistor that can be connected to a voltage higher than
VCC. The HWD803/HWD809 have an active-low RESET
output, while the HWD810 has an active-high RESET
output. The reset comparator is designed to ignore fast
transients on VCC, and the outputs are guaranteed to
be in the correct logic state for VCC down to 1V.
Low supply current makes the HWD803/HWD809/
HWD810 ideal for use in portable equipment. The
HWD803 is available in a 3-pin SC70 package, and the
HWD809/HWD810 are available in 3-pin SC70 or SOT23
packages.
Applications
Computers
Controllers
Intelligent Instruments
Critical µP and µC Power Monitoring
Portable/Battery-Powered Equipment
Automotive
Typical Operating Circuit
VCC
VCC
HWD803
HWD809
RESET
RPULL-UP*
VCC
µP
RESET
INPUT
GND GND
*HWD803 ONLY
____________________________Features
o Precision Monitoring of +2.5V, +3V, +3.3V, and
+5V Power-Supply Voltages
o Fully Specified Over Temperature
o Available in Three Output Configurations
Open-Drain RESET Output (HWD803)
Push-Pull RESET Output (HWD809)
Push-Pull RESET Output (HWD810)
o 140ms min Power-On Reset Pulse Width
o 12µA Supply Current
o Guaranteed Reset Valid to VCC = +1V
o Power Supply Transient Immunity
o No External Components
o 3-Pin SC70 and SOT23 Packages
Ordering Information
PART
TEMP. RANGE PIN-PACKAGE
HWD803_EXR-T
-40°C to +125°C 3 SC70-3
HWD803_EXR-T10 -40°C to +125°C 3 SC70-3
HWD809_EXR-T
-40°C to +125°C 3 SC70-3
HWD809_EXR-T10 -40°C to +125°C 3 SC70-3
HWD809_EUR-T
-40°C to +105°C 3 SOT23-3
HWD809_EUR-T10 -40°C to +105°C 3 SOT23-3
HWD810_EXR-T
-40°C to +125°C 3 SC70-3
HWD810_EXR-T10 -40°C to +125°C 3 SC70-3
HWD810_EUR-T
-40°C to +105°C 3 SOT23-3
HWD810_EUR-T10 -40°C to +105°C 3 SOT23-3
Note: These parts are offered in 2.5k or 10k reels, and must be
ordered in 2.5k or 10k increments. Order HWD803_EXR-T for
2.5k reels and HWD803_EXR-T10 for 10k reels. Insert the
desired suffix letter from the Selector Guide into the blank to
complete the part number. All versions of these products may
not be available at the time of announcement. Contact factory for
availability.
Pin Configuration
TOP VIEW
GND 1
HWD803
HWD809
HWD810
3 VCC
RESET (RESET) 2
( ) ARE FOR HWD810.
SC70-3/SOT23-3
HWD803 AVAILABLE IN SC70-3 ONLY.
1







HWD810 pdf, 数据表
3-Pin Microprocessor Reset Circuits
Package Information (continued)
8














页数 9 页
下载[ HWD810.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
HWD8103-Pin Microprocessor Reset CircuitsChengdu Sino Microelectronics System
Chengdu Sino Microelectronics System

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap