DataSheet8.cn


PDF ( 数据手册 , 数据表 ) GT1-2S-55R

零件编号 GT1-2S-55R
描述 Coaxial cable connection of Antennas/ Sensors/ and Communication Trunk Lines
制造商 Hirose Electric
LOGO Hirose Electric LOGO 


1 Page

No Preview Available !

GT1-2S-55R 数据手册, 描述, 功能
Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
Termination of coaxial cables in automotive, medical and instrumentation applications
utilizes a single motion to crimp the center conductor, shield and outer Insulator.
GT1 Series
— Connectors for coaxial cables —
<Several types and configurations: In-line, board mounted, combinations of
coaxial cable with signal/power. Multi-position.>
Features
Cost efficient termination
Highly efficient and reliable single motion crimp termination allows high volume production with semi-
automatic equipment.
Lock-release latching system
Shock / vibration resistant electrical connections
Verification of the full contact insertion
Excellent shielding effects.
Excellent High Frequency Performance
Refer to V.S.W.R. data on the following pages.
2003.6







GT1-2S-55R pdf, 数据表
BMethod of Using the GT1K-1S Retainer
a. Insert so that the terminal
locking tab is inserted
between the top surface
of the terminal and the
housing.
b. Push in while changing
the angle of the retainer
until the front surface
comes to a stop.
c. Press the rear portion of
the retainer and snap it
into the locked position.
d. If locking is not complete,
press the rear portion of
the retainer again while
pulling it backward.
* Check that all locations are locked.
8







GT1-2S-55R equivalent, schematic
Products Listed Below are of the Combination Type (Two Terminals for Use with Single-Conductor Shielded
Cable + One Power Supply Terminal) with Key Positions that Differ from the Products Listed on Previous Pages
F Connectors
Housing
Part Number
CL No.
GT1-2/1S-HU(A)(21) 751-0024-9-21
GT1-2/1S-HU(A)(21) 751-0024-9-21
Note1: Mates only with GT1-2/1P-DS.
Note2: Used with separate retainer.
Material
PBT
PBT
Color
Light gray
Blue
M Connector
Printed Circuit Board Type
BRecommended Board
Mounting Pattern
Ground terminal
For inner conductor
For outer conductor
Panel
BRecommended Panel
Cut-out
Board
Item
Material
Finish
Housing
PBT
----
----
0.64X1.1 Terminal Brass
Tin plating
Part Number
CL No.
Color
Insulator
PBT
----
GT1-2/1P-DS(21) 751-0023-6-21
Light gray
Outer terminal
Brass
Tin plating
GT1-2/1P-DS(21) 751-0023-6-21
Blue
Tub terminal for DS 070 Brass
Tin plating
Note1: Mates only with GT1-2/1S-HU(A).
Note 2: Use mounting screws of M3 with nominal diameter 3L-6 (for a panel thickness of 1.6mm)
16
Color
Light gray
Blue
----
Dark gray
----
----










页数 20 页
下载[ GT1-2S-55R.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
GT1-2S-55RCoaxial cable connection of Antennas/ Sensors/ and Communication Trunk LinesHirose Electric
Hirose Electric

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap