DataSheet8.cn


PDF ( 数据手册 , 数据表 ) HV121P01-101

零件编号 HV121P01-101
描述 LCD Module
制造商 BOE
LOGO BOE LOGO 


1 Page

No Preview Available !

HV121P01-101 数据手册, 描述, 功能
PROPRIETARY NOTE
THIS SPECIFICATION IS THE PROPERTY OF BOE HYDIS AND SHALL NOT
BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF
BOE HYDIS AND MUST BE RETURNED TO BOE HYDIS UPON ITS REQUEST
TITLE : HV121P01-101
Product Specification for Lenovo
Rev. O
BOE HYDIS TECHNOLOGY CO., LTD
SPEC. NUMBER
S864-1328
B2005-C001-A (1/3)
PRODUCT GROUP
TFT LCD
REV.
O
ISSUE DATE
2007.03.15
PAGE
1 OF 31
A4(210 X 297)







HV121P01-101 pdf, 数据表
PRODUCT GROUP
TFT LCD PRODUCT
REV
O
ISSUE DATE
2007.03.15
Notes : 1. The supply voltage is measured and specified at the interface connector of LCM.
The current draw and power consumption specified is for 3.3V at 25.
The test pattern of power supply current
a) Typ : Window XP pattern @ 50Hz
b) Max : Gray 28 @ vertical 2 skip line pattern
2. Reference value, which is measured with Samsung Electric SIC-180 Inverter.
(VBL Min is value at IBL Min and VBL Max is value at IBL Max)
3. Minimum value of lamp current : In case of current adjustment method
4. The lamp frequency should be selected as different as possible from the horizontal
synchronous frequency and its harmonics to avoid interference which may
cause line flow on the display.
5. For starting the backlight unit, the output voltage of DC/AC's transformer should
be larger than the minimum lamp starting voltage.
(1,050 Vrms at 25 , 1,310 Vrms at 0 )
If an inverter has shutdown function it should keep its output for more than
1 second even if the lamp connector open. Otherwise the lamps may not to be
turned on.
6. End of Life shall be determined by the time when any of the following is satisfied
under continuous lighting at 25and IBL = 6.0[mA] Max Only.
y Intensity drops to 50% of the Initial Value.
7. The typical value is calculated value for reference (VBL × IBL).
Max value adds a 10 % tolerance of typical value of Back light power.
SPEC. NUMBER
S864-1328
B2005-C001-A (3/3)
SPEC TITLE
HV121P01-101 Product Specification for Lenovo
PAGE
8 OF 31
A4(210 X 297)







HV121P01-101 equivalent, schematic
PRODUCT GROUP
TFT LCD PRODUCT
REV
O
6.0. SIGNAL TIMING SPECIFICATION
The specification of the signal timing parameters are listed in Table 8.
<Table 8. Signal Timing Specification.>
Item
Symbols Min Typ Max
Frame Period
Vertical Display Period
One line Scanning Period
Horizontal Display Period
Clock Frequency
T1
T2
T3
T4
1/T5
1080
1050
1560
1400
-
-
-
-
-
84.8
-
-
-
-
110
ISSUE DATE
2007.03.15
Unit
Lines
Lines
Clocks
Clocks
MHz
7.0 SIGNAL TIMING WAVEFORMS
7.1 Timing wave forms of interface signal
T1
T2
DE
DCLK
DE
T5
T3
T4
DATA
SIGNALS
Valid display data (1600 Clocks)
SPEC. NUMBER
S864-1328
B2005-C001-A (3/3)
SPEC TITLE
HV121P01-101 Product Specification for Lenovo
PAGE
16 OF 31
A4(210 X 297)










页数 30 页
下载[ HV121P01-101.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
HV121P01-100LCD ModuleBOE
BOE
HV121P01-101LCD ModuleBOE
BOE

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap