DataSheet8.cn


PDF ( 数据手册 , 数据表 ) VM800C

零件编号 VM800C
描述 Embedded Video Engine Credit Card Board
制造商 FTDI
LOGO FTDI LOGO 


1 Page

No Preview Available !

VM800C 数据手册, 描述, 功能
FTDI Chip
VM800C Datasheet
Embedded Video Engine
Credit Card Board
VM800C Datasheet
Version 1.0
Document Reference No.: FT_000844 Clearance No.: FTDI# 345
General Purpose Multi Media Controller
1 Introduction
1.1 Features
The VM800C is a development module for
FTDI’s FT800, which is used to develop and
demonstrate the functionality of the FT800
Embedded Video Engine, EVE. This module
behaves as an SPI slave, and requires a SPI
Master for proper micro-controller interfacing
and system integration.
VM800C modules support 3 different LCD
panel size options. Users can also connect to
different LCD screens as long as they meet
the FT800 technical specification and fit the
VM800C LCD connector.
VM800C35A-D, 3.3/5V micro-
controller adaptor card with 3.5” LCD
touch display
VM800C43A-D, 3.3/5V micro-
controller adaptor card with 4.3” LCD
touch display
VM800C50A-D, 3.3/5V micro-
controller adaptor card with 5.0” LCD
VMFT800C35A-N, 3.3/5V micro-
controller adaptor card, with 3.5”
LCD connector but no display
VMFT800C43A-N, 3.3/5V micro-
controller adaptor card, with 4.3/5.0
LCD connector but no display
The VM800C utilises the FTDI FT800
Embedded Video Engine. Graphic, audio and
touch features of the FT800 can be accessed
with the VM800C. For a full list of the FT800’s
features please see the FT800 datasheet.
The VM800C has the following features:
Ready to use LCD module
Part types with LCDs supporting resistive
touch with pressure sensing.
On board LCD backlight LED Driver
Supports mono audio output
On board audio power amplifier and micro
speaker
Flexible power supply. Powering the VM800C
using either a 2.1mm power jack , SPI
master connector or via USB Micro-B port
5 V tolerant buffers when used with a 5V SPI
Master.
Use of FTDI devices in life support and/or safety applications is entirely at the user’s risk, and the user agrees
to defend, indemnify and hold harmless FTDI from any and all damages, claims, suits or expense resulting
from such use.







VM800C pdf, 数据表
VM800C Datasheet
Version 1.0
Document Reference No.: FT_000844 Clearance No.: FTDI# 345
Signal
Pin No
(3.5”)
Pin No
(4.3/5.0”)
Description
G6 26
19 Bit 6 of Green RGB signals,
push-pull output, 4/8mA
sink/source current
G7 27
20 Bit 7 of Green RGB signals,
push-pull output, 4/8mA
sink/source current
B2 30
23 Bit 2 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
B3 31
24 Bit 3 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
B4 32
25 Bit 4 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
B5 33
26 Bit 5 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
B6 34
B7 35
27 Bit 6 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
28
Bit 7 of Blue RGB signals, push-
pull output, 4/8mA sink/source
current.
XP 48
37 X +ve touch
YM 49
38 Y ve touch
XM 50
39 X ve touch
YP 51
40 Y +ve touch
3V3
9,10,11,41,42
4 3V3 Power
GND
12,13,20,21,28,2953,54 3,5,6,13,14,21,22,29,36 Ground
NC 5,6,7,39,40,43,44,45,46,47 35 No connect
Table 3-4 J1 Pinout
J2 - Selection between lineout or loop back into the power amplifier.
Selection between audio lineout or loop back into the power amplifier. (Footprint only, JP2 next to J2
is connected by default for on board amplifier and on board mini speaker). If J2 is soldered and used
for audio output selection, JP2 needs to be removed.
Pin No.
Name
1 -2
Audio amp enabled
2-3 Audio amp mute, Audio lineout on pin 1
Table 3-5 J2 Pin Options
J3 SP+
Audio speaker +ve from the onboard amplifier.
Copyright © 2013 Future Technology Devices International Limited
8







VM800C equivalent, schematic
VM800C Datasheet
Version 1.0
Document Reference No.: FT_000844 Clearance No.: FTDI# 345
Further documentation associated with the VM800C development system and design flow can be found
at following link: http://www.ftdichip.com/VM800C.htm
The FT800 Programming Guide describes the programming code and formats used by the FT800. The
Sample Application is a well-formatted, and documented program that illustrates the Programming Guide,
and provides numerous design examples and reference code demonstrations.
J5 Pin number J5 Signal MPSSE pin number MPSSE Signal
1 SCK
2
SK
2 MOSI
3
DO
3 MISO
4
DI
4 CS#
5
CS
5 INT#
7
GPIOL1
6 PD#
9
GPIOL3
7 5V
1
VCC
8 3.3V
-
-
9 GND
10
GND
10 GND
-
-
Table 5-2 MPSSE cable (C232HM-EDHSL-0) connection
MPSSE Lead Color
ORANGE
YELLOW
GREEN
BROWN
PURPLE
BLUE
RED
-
Black
-
5.3 Arduino® Setup
Sample codes and demo applications are provided to users who want to connect VM800C to a MCU. FTDI
provides sample source code, Sample Application notes (AN_246) and a ready to run demo based on
Arduino® platform. Further documentation associated with the VM800C development system and design
flow can be found at http://www.ftdichip.com/VM800C.htm.
Applicaton note, AN_246, provides a reference guide for utilizing the VM800C development systems with
the Sample Application software and Arduino Pro platform.
The FT800 Programming Guide describes the programming code and formats used by the FT800. The
Sample Application is a well-formatted, and documented program that illustrates the Programming Guide,
and provides numerous design examples and reference code demonstrations.
Copyright © 2013 Future Technology Devices International Limited
16










页数 22 页
下载[ VM800C.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
VM800BEmbedded Video Engine Basic moduleFTDI
FTDI
VM800CEmbedded Video Engine Credit Card BoardFTDI
FTDI

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap