|
|
零件编号 | T216XW01-V0 | ||
描述 | TFT-LCD PANEL | ||
制造商 | AUO | ||
LOGO | |||
1 Page
Product Description: T216XW02 TFT-LCD PANEL with RoHS guarantee
AUO Model Name: T216XW01 V0
Customer Part No/Project Name:
Customer Signature
Date AUO
2008/09/22
Approved By: PM Director / Frank Hsu
Reviewed By: RD Director / Hong Hong Jye
Reviewed By: Project Leader / Sarah Ke
Prepared By: PM / Hanson Wang
©Copyright AU Optronics, Inc.
April, 2007 All Rights Reserved.
No Reproduction and Redistribution Allowed
T216XW01 Ver0.0
1/25
3-2 Interface Connections
- LCD connector (CN1): Starconn 093G30-B0001A-1
Note:
1. All GND (ground) pins should be connected together and should also be connected to the LCD’s metal
frame. All Vcc (power input) pins should be connected together.
Pin No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Symbol
Description
Reserved Open or High
Reserved Open or High
Reserved Open or High
GND
Ground
Rx0-
LVDS Channel 0 [Polarity: Negative]
Rx0+
LVDS Channel 0 [Polarity: Positive]
GND
Ground
Rx1-
LVDS Channel 1 [Polarity: Negative]
Rx1+
LVDS Channel 1 [Polarity: Positive]
GND
Ground
Rx2-
LVDS Channel 2 [Polarity: Negative]
Rx2+
LVDS Channel 2 [Polarity: Positive]
GND
Ground
RXCLK- LVDS Clock [Polarity: Negative]
RXCLK+ LVDS Clock [Polarity: Positive]
GND
Ground
Rx3-
LVDS Channel 3 [Polarity: Negative]
Rx3+
LVDS Channel 3 [Polarity: Positive]
GND
Ground
Reserved Open
LVDS Option* Low for JEIDA, High/Open for NS
Reserved Open
GND
Ground
GND
Ground
GND
Ground
Vdd (+5V) 5V, DC, Regulated
Vdd (+5V) 5V, DC, Regulated
Vdd (+5V) 5V, DC, Regulated
Vdd (+5V) 5V, DC, Regulated
Vdd (+5V) 5V, DC, Regulated
Note
AUO internal test pin
AUO internal test pin
AUO internal test pin
AUO internal test pin
©Copyright AU Optronics, Inc.
April, 2007 All Rights Reserved.
No Reproduction and Redistribution Allowed
T216XW01 Ver0.0
8/25
Note:
1. Contrast Ratio (CR) is defined mathematically as:
Contrast Ratio=
Surface Luminance of Lon1
Surface Luminance of Loff1
2. Surface luminance is luminance value at point 1 across the LCD surface 50cm from the surface with all
㎡pixels displaying white. From more information see FIG 4-2. When IBL = 32 mA, LWH=350cd/ (typ.)
LWH=Lon1, Where Lon1 is the luminance with all pixels displaying white at center 1 location.
H
V/2 1 2 3
4 5 6V
7 89
V/6
H/6 H/2
Fig.4-2 Optical measurement point
δ3. The variation in surface luminance, WHITE is defined (center of Screen) as:
δWHITE(9P)=Maximum(Lon1, Lon2,…,Lon9)/Minimum(Lon1, Lon2,…Lon9)
4. Response time Tγ is the average time required for display transition by switching the input signal for five
luminance ratio (0%,25%,50%,75%,100% brightness matrix) and is based on fv=60Hz to optimize.
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the
horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface.
For more information see FIG 4-5.
©Copyright AU Optronics, Inc.
April, 2007 All Rights Reserved.
No Reproduction and Redistribution Allowed
T216XW01 Ver0.0
16/25
|
|||
页数 | 25 页 | ||
下载 | [ T216XW01-V0.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
T216XW01-V0 | TFT-LCD PANEL | AUO |
T216XW01-V1 | TFT LCD Panel | AUO |
T216XW01-V2 | TFT LCD Panel | AUO |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |