DataSheet8.cn


PDF ( 数据手册 , 数据表 ) TK-7102H

零件编号 TK-7102H
描述 VHF FM TRANSCEIVER SERVICE MANUAL
制造商 Kenwood
LOGO Kenwood LOGO 


1 Page

No Preview Available !

TK-7102H 数据手册, 描述, 功能
VHF FM TRANSCEIVER
TK-7102H
SERVICE MANUAL
© 2001-11 PRINTED IN JAPAN
B51-8610-00 (N) 1051
Chassis
(A10-4048-11)
Cabinet
(A01-2181-01)
Front glass
(B10-2668-03)
Panel assy
(A62-0942-03)
Modular jack
(E08-0877-05)
Key top
(K29-9065-01)
CONTENTS
GENERAL .................................................. 2
OPERATING FEATURES .......................... 3
REALIGNMENT ......................................... 7
DISASSEMBLY FOR REPAIR ................... 9
CIRCUIT DESCRIPTION .......................... 10
SEMICONDUCTOR DATA ...................... 15
DESCRIPTION OF COMPONENTS ........ 17
PARTS LIST ............................................. 19
EXPLODED VIEW .................................... 25
PACKING ................................................. 26
ADJUSTMENT ........................................ 27
TERMINAL FUNCTION ........................... 32
PC BOARD VIEWS
DISPLAY UNIT (X54-3340-20) ............ 33
TX-RX UNIT (X57-6380-20) ................ 35
SCHEMATIC DIAGRAM .......................... 41
BLOCK DIAGRAM ................................... 45
LEVEL DIAGRAM .................................... 47
SPECIFICATIONS .................................... 49







TK-7102H pdf, 数据表
TK-7102H
REALIGNMENT
3-2. Connection Procedure
1. Connect the TK-7102H to the personal computer with the
interface cable.
2. When the Power is switched on, user mode can be en-
tered immediately. When the PC sends a command, the
radio enters PC mode.
When data is transmitted from transceiver, the red LED
blink.
When data is received by the transceiver, the green LED
blink.
In the PC mode, 4CH LEDs, [MON] LED and [q] LED are
turned on.
Notes :
• The data stored in the personal computer must match
model type when it is written into the EEPROM.
• Attach the interface cable, then change the TK-7102H to
PC mode.
3-3. KPG-46 Description
(PC programming interface cable : Option)
The KPG-46 is required to interface the TK-7102H to the
computer. It has a circuit in its D-subconnector (25-pin) case
that converts the RS-232C logic level to the TTL level.
The KPG-46 connects the modular microphone jack of
the TK-7102H to the computers RS-232C serial port.
IBM-PC
KPG-46
KPG-70D
Fig. 1
TK-7102H
4. Clone Mode
Programming data can be transferred from one radio to
another by connecting them via their modular microphone
jacks. The operation is as follows (the transmit radio is the
master and the receive radio is the slave).
Note :
Clone mode should enabled.
1. Turn the master TK-7102H power ON with the [1] key
held down. The TK-7102H [q] LED is turned on.
2. Power on the slave TK-7102H.
3. Connect the cloning cable (No. E30-3382-05) to the
modular microphone jacks on the master and slave.
4. Press the [q] key on the master TK-7102H transceiver.
The data of the master is sent to the slave. While the
master is sending data, [TX] LED blinked. While the slave
is receiving the data, 4 LEDs, [MON] LED, [q] LED are
turned on and [BUSY] LED blinked. When cloning of data
is completed, the master [TX] LED turned off, and the
slave automatically operates in the User mode. The slave
can then be operated by the same program as the mas-
ter.
5. The other slave can be continuously cloned. Carry out
the operation in step 2 to 4.
4-1. Adding the data password.
If the data password is set in the optional feature menu,
you must enter the password (Master transceiver) to acti-
vate a clone mode.
you can use 1, 2, 3, and 4 to configure the password. The
maximum length of the password is 10 digits.
1. [1]+Power ON.
2. [1]~[4] LED, and MON LED are turned ON.
3. Enter the password using [1]~[4] keys.
4. Press [MON] key.
5. If the password matches, the transceiver enters a clone
mode. Otherwise, transceiver beeps and returns to the
password input mode.
3-4. Programming Software Description
The KPG-70D programming disk is supplied in 3-1/2" disk
format. The software on this disk allows a user to program
TK-7102H radio via a programming interface cable (KPG-46).
3-5. Programming With IBM PC
If data is transferred to the transceiver from an IBM PC
with the KPG-70D, the destination data (basic radio informa-
tion) for each set can be modified.
Clone cable
(E30-3382-05)
Fig. 2
8







TK-7102H equivalent, schematic
TK-7102H
SEMICONDUCTOR DATA
Pin No. Name
36 AVREF
37 FNC1
38 FNC2
39 HOOK
40 RXD
41 TXD
42 PTT
43 FNC3
44 FNC4
45 FNC5
46 FNC6
47 FNC7
48 FNC8
49 NC
50 MUTE1
51 MUTE2
52 MUTE3
53 DT
54 CK
55 NC
56 EEPCK
57 EEPDT
58 EEPWT
59 DST1
60 DST2
61 DST3
62 NC
63 24VDET
64 NC
I/O Function
- +5V
I/O Function Port 1
I/O Function Port 2
I Hook
I From FPU
O To FPU
I PTT Key
I/O Function Port 3
I/O Function Port 4
I/O Function Port 5
I/O Function Port 6
I/O Function Port 7
I/O Function Port 8
I
O AF Mute
O Speaker Mute
O AF AMP SW
O Common Data
O Common Clock
I
O EEPROM Clock
I/O EEPROM Data
O ROM (EEPROM) Write Protect
I Destination 1
I Destination 2
I Destination 3 (Open)
I
I 24V Detect
I
Pin No. Name
65 LEDC1
66 LEDC2
67 LEDR
68 LEDG
69 MICBL
70 LEDC3
71 LEDC4
72 VSS
73 MICMT
74 MICEM
75 NC
76 8RC
77 8TC
78 CM
79,80 NC
81 VDD5M
82~85 NC
86 KMI1
87 KMI2
88 KMI3
89 KMI4
90 NC
91 NARROW
92 WIDE
93 SBC
94 FLASH
95~98 NC
99 KMO1
100 KMO2
I/O Function
O LED for CH1 Key
O LED for CH2 Key
O TX LED
O Busy LED
O Mic Back Light
O LED for CH3 Key
O LED for CH4 Key
- GND
O Mic1 Mute
O Mic2 Mute
I
O 8R Control
O 8T Control
I/O Mic Key Check
I
- +5V
I
I Key Matrix Input 1
I Key Matrix Input 2
I Key Matrix Input 3
I Key Matrix Input 4
I
O Wide / Narrow 2
O Wide / Narrow
O Battery Switch
- Flash Write Port
I
O Key Matrix Output 1
O Key Matrix Output 2
16










页数 30 页
下载[ TK-7102H.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
TK-7102HVHF FM TRANSCEIVER SERVICE MANUALKenwood
Kenwood

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap