DataSheet8.cn


PDF ( 数据手册 , 数据表 ) ZICM2410P2-1

零件编号 ZICM2410P2-1
描述 Module and Extended Range Module
制造商 CEL
LOGO CEL LOGO 


1 Page

No Preview Available !

ZICM2410P2-1 数据手册, 描述, 功能
DATA SHEET
MeshConnect™ Module Series
Module and Extended Range Module
Integrated Transceiver Modules for ZigBee / IEEE 802.15.4
Development Kits available: ZICM2410P0-KIT2-1, ZICM2410P2-KIT1-1
DESCRIPTION
CEL's MeshConnect™ Module Series provides high performance
and low cost 2.4 GHz IEEE 802.15.4 / ZigBee modules for a broad
range of wireless networks. The MeshConnect certified and quali-
fied modules, enable customer to accelerate time to market by
greatly reducing design and certification phases of development.
CEL's MeshConnect™ radio modules leverage the advanced
features of the MeshConnect™ Integrated Circuit (IC). The IC is
a true single-chip solution, compliant with ZigBee specifications
and IEEE 802.15.4, a complete wireless solution for all ZigBee
applications. The IC consists of an RF transceiver with baseband
modem, a hardwired MAC and an embedded 8051 microcon-
troller with internal Flash memory. The device provides numerous
general-purpose I/O pins, peripheral functions such as timers and
UARTs and is one of the first devices to provide an embedded
Voice CODEC. This device is also ideal for low power applications.
The original MeshConnect module delivers excellent performance
at a surprisingly low cost. The module’s +6dBm output power
means better range, more reliable transmission and fewer nodes
in your network. It also makes these modules ideal for applica-
tions where cost and power constraints do not allow for external
power amplifiers or peripheral range extension components.
The MeshConnect Extended Range module adds a power ampli-
fier (PA) and low noise amplifier (LNA) to increase range to over
two miles - plus more reliable transmission and fewer nodes in
your network. It is especially useful for open outdoor applica-
tions where the nodes are physically far apart, or for indoor use
where the nodes have to operate in a noisy RF environment. The
Extended Range Module’s outstanding +123 dBm budget link
ensures high quality connections even in such harsh environments.
ORDERING INFORMATION
MeshConnectModule Series
FEATURES
• 96 kB FLASH Memory
• 8 kB SRAM
• 8051 MCU core
• up to 22 GPIO Pins
• SPI (Master/Slave) + UARTs
• I2S/PCM Interface with two 128-byte FIFOs
• µ-law/a-law/ADPCM Voice Codec
• 4-channel 8-bit ADC
• High RF performance:
- Up to 123.5 dB RF Link Budget
- RX Sensitivity: -97 dBm and -103.5 dBm
- RF TX Power:+6 dBm and +20 dBm
• Scalable Data Rate: 250 kbps, 500 kbps and 1Mbps
• Miniature footprint: 1” x 1.350” (25.4 mm x 34.3 mm)
• Voice Codec Support: µ-law/a-law/ADPCM
• 4 Level Power Management Scheme w/ Deep Sleep Mode (0.3 µA)
• Integrated PCB trace antenna
• 16 RF channels
• Up to 12,000 feet of range
• AES 128-bit encryption
• FCC, CE and IC certifications
• ROHS compliant
APPLICATIONS
Industrial Controls
• Food processing controls
• Traffic Management
• Sensor Networks
• Asset Management
• Barcode reader
• Patient Monitoring
• Glucose monitor
Home &
Building Automation
• Security
• HVAC control
• Lighting control
• Thermostats
Part Number
MeshConnect™
Module
MeshConnect™
Extended Range Module
Order Number
ZICM2410P0-1
ZICM2410P0-1-SN
ZICM2410P0-1C
ZICM2410P0-1C-SN
ZICM2410P0-KIT2-1
ZICM2410P2-1
ZICM2410P2-1-SN
ZICM2410P2-1C
ZICM2410P2-1C-SN
ZICM2410P2-KIT1-1
Description
+6 dBm Output power, PCB Trace antenna
+6 dBm Output power, PCB Trace antenna, SNAP software
+6 dBm Output power, with u.FL Connector for external antenna
+6 dBm Output power, with u.FL Connector for external antenna, SNAP software
+6 dBm Engineering Development Kit
+20 dBm Output power, PCB Trace antenna
+20 dBm Output power, PCB Trace antenna, SNAP software
+20 dBm Output power, with u.FL Connector for external antenna
+20 dBm Output power, with u.FL Connector for external antenna, SNAP software
Evaluation board for +20 dBm module
The information in this document is subject to change without notice, please confirm data is current
Document No: 0007-00-07-00-000 (Issue C)
Date Published: April 7, 2010
Page 1







ZICM2410P2-1 pdf, 数据表
MeshConnect™ Module Series
ABSOLUTE MAXIMUM RATINGS
Description
Power Supply Voltage (Vcc)
Voltage on any digital pin
Input RF Level
Storage Temperature
Reflow Soldering Temperature
MeshConnect
Module
Min Max
-0.3 3.3
-0.3 3.3
10
-55 125
250
MeshConnect
Extended Range Module
Min Max
-0.3 3.3
-0.3 3.3
-6
-55 125
250
Note: Exceeding the maximum ratings may cause permanent damage to the module or devices.
Unit
VDC
VDC
dBm
°C
°C
RECOMMENDED (OPERATING CONDITIONS)
Description
Operating ambient temperature range, TA
Operating Supply Voltage
Input Frequency
MeshConnectModule
MeshConnectExtended Range Module
Min Typ Max
-40 25 85
2.1 3.0
2.405
2.48
Unit
°C
VDC
GHz
DC CHARACTERISTICS (@ 25°C, VCC = 3.0V unless otherwise noted)
Description
Vcc Supply (Vcc)
Rx mode Current (Vcc = 3.0V)
Tx mode Current (Vcc = 3.0V, Pout Max)
Tx mode Current (Vcc = 2.1V, Pout Max)
Tx mode Current (Vcc = 3.0V, 0 dBm)
Sleep Mode (Deep) Current
MeshConnect
Module
Min Typ Max
2.1 3.3
35 38
44 48
44 48
31
1
MeshConnect
Extended Range Module
Min Typ
2.1
38
175
120
75
4
Max
3.3
42
Unit
VDC
mA
mA
mA
mA
µA
RF CHARACTERISTICS (@ 25°C, VCC = 3.0V unless otherwise noted)
Description
Frequency Band (16 – 5MHz wide channels)
Rx Sensitivity for 1% PER
Saturation (maximum input level)
Tx Output Power (VCC = 3.0V)
TX Output Power (VCC = 2.1V)
Error Vector Magnitude
Adjacent Channel Rejection
+/- 5 MHz
+/- 10 MHz
Frequency Error Tolerance
Output Power Control Range
Over the Air Data Rate
Harmonics (2nd & 3rd)
MeshConnect
Module
MeshConnect
Extended Range Module
Min
2.405
4.5
4.5
Typ Max Min Typ Max
2.480 2.405
2.480
-97 -85
-103.5 -85
5 -11
6.0 20
6.0 15.5
17 35
15 35
35
35
-96.2
47 35 47
51 35 51
96.2 -96.2
55 55
250 1000
250
-41.2
96.2
1000
-41.2
Unit
GHz
dBm
dBm
dBm
dBm
%
dB
kHz
dB
kbps
dBm/MHz
Page 8







ZICM2410P2-1 equivalent, schematic
MeshConnect™ Module Series
REFERENCES & REVISION HISTORY
Previous Versions
0007-00-07-00-000
(Issue A) February 05, 2009
0007-00-07-00-000
(Issue B) June 11, 2009
0007-00-07-00-000
(Issue C) October 6, 2009
0007-00-07-00-000
(Issue C) January 29, 2010
0007-00-07-00-000
(Issue C) April 7, 2010
Changes to Current Version
Initial preliminary datasheet.
Updated Development Kit and Agency Certification
Added New MeshConnect Extended Range Module
Removed "Prelimary" from datasheet and "Pending" from Agency Certification
Added SNAP enabled modules to Ordering Information , updated module land
footprint
Page(s)
N/A
2, 14, 15
All
All
1
Disclaimer
• The information in this document is current as of the published date. The information is subject to change without
notice. For actual design-in, refer to the latest publications of CEL data sheets or data books, etc., for the most
up-to-date specifications of CEL products. Not all products and/or types are available in every country. Please
check with an CEL sales representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of CEL. CEL assumes no responsibility for any errors that may appear in this document.
• CEL does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of CEL products listed in this document or any other liability arising from the
use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of CEL or others.
• Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these circuits,
software and information in the design of a customer’s equipment shall be done under the full responsibility of the
customer. CEL assumes no responsibility for any losses incurred by customers or third parties arising from the use
of these circuits, software and information.
• While CEL endeavors to enhance the quality, reliability and safety of CEL products, customers agree and
acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to
property or injury (including death) to persons arising from defects in CEL products, customers must incorporate
sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features.
Page 16










页数 16 页
下载[ ZICM2410P2-1.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
ZICM2410P2-1Module and Extended Range ModuleCEL
CEL
ZICM2410P2-1-SNModule and Extended Range ModuleCEL
CEL
ZICM2410P2-1CModule and Extended Range ModuleCEL
CEL
ZICM2410P2-1C-SNModule and Extended Range ModuleCEL
CEL

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap