DataSheet8.cn


PDF ( 数据手册 , 数据表 ) KV-29X5L

零件编号 KV-29X5L
描述 TRINITRON COLOR TV SERVICE MANUAL
制造商 Sony
LOGO Sony LOGO 


1 Page

No Preview Available !

KV-29X5L 数据手册, 描述, 功能
SERVICE MANUAL
MODEL
COMMANDER DEST
CHASSIS NO.
KV-29X5A
KV-29X5B
KV-29X5D
KV-29X5E
RM-883 Italian
SCC-Q06A-A
RM-883 French SCC-Q02A-A
RM-883 AEP
SCC-Q04A-A
RM-883 Spanish SCC-Q05A-A
SELF-DIAGNOSTIC FUNCTION
FE-1 CHASSIS
MODEL
COMMANDER DEST
CHASSIS NO.
KV-29X5K
KV-29X5L
KV-29X5R
KV-29X5U
RM-883 OIRT
RM-883 Irish
RM-883 OIRT
RM-883 UK
SCC-Q03A-A
SCC-Q07A-A
SCC-Q03B-A
SCC-Q01A-A
MICROFILM
/
MENU
PROGR
RM-883
TRINITRON ® COLOR TV
®
1







KV-29X5L pdf, 数据表
Additional TV Features
Using the Sleep Timer
The TV may be set to switch automatically to the standby mode after a length of time
chosen by you. You may set the time in 15 minute steps up to 4 hours.
1 Press the MENU button on the remote control to
/ display the menu on the TV screen.
SELECT
OFF
2 Press the blue button on the control to select the
symbol on the TV screen, then press the yellow
button.
SELECT
OFF
SELECT
OFF
OK
MENU
3 Press the yellow button repeatedly until the
required amount of time delay appears on the
screen.
PROGR
RM-883
4 Once the time delay has been selected, press the
MENU button to remove the on-screen display.
One minute before standby, the display shown
appears on the screen.
SELECT
1:00
0:59
Notes:
• When watching TV, press the button to display
time remaining.
• To return to normal operation from standby mode,
/press the button.
Additional TV Features
Viewing Teletext
Teletext is an information service transmitted by most TV stations.
/
MENU
PROGR
RM-883
Selecting Teletext
1 Press a number button on the remote control to
select the channel which carries the teletext service
you wish to receive.
2 Press the button on the remote control to switch
on teletext.
3 Input three digits for the page number using the
numbered buttons on the control.
4 Press the button to switch off teletext.
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
Note: Teletext errors may occur if the broadcasting
signals are weak.
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
Using Other Teletext Functions
To Superimpose Teletext on to the TV
Press once in teletext mode or twice in TV mode to
superimpose teletext on to the TV screen.
Press again to cancel teletext mode.
To Move to Next or Preceding Page
Press PROGR +/- on the remote control to select the
previous or next page.
To Freeze a Teletext Page
Press on the control to freeze the page.
Press again to cancel the freeze.
Revealing concealed information (eg: answers
to a quiz).
Press to reveal information.
Press again to conceal the information.
Using colour buttons to access pages (Fastext)
When the colour coded menu appears at the bottom of
a page, press the colour button (green, red, yellow or
blue) to access the corresponding page.
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
TELETEXT
Index
Programme
News
Sport
Weather
25
153
101
98
11 12







KV-29X5L equivalent, schematic
KV-29X5
SECTION 3
SET-UP ADJUSTMENTS
• When complete readjustment is necessary or a new
picture tube is installed, carry out the following
adjustments.
• Unless there are specific instructions to the contrary,
carry out these adjustments with the rated power supply.
• Unless there are specific instructions to the contrary, set the
controls and switches to the following settings :
Contrast
............... 80% [or remote control normal]
Brightness
............... 50%
Preparation:
1. In order to reduce the influence of geomagnetism on the set’s
picture tube, face it in an easterly or westerly direction.
2. Switch on the TV set’s power and degauss with the
degausser.
3-1. BEAM LANDING
1. Input an all-white signal from the pattern generator.
Set the Contrast and Brightness to normal.
2. Set the pattern generator raster signal to all Red.
3. Move the deflection yolk forward and adjust with the purity
control so that the Red is at the centre and the Blue and Green
take up equally sized areas on each side of the screen.
[See Fig.3-1 - 3-3].
4. Move the deflection yolk forward and adjust so that the entire
screen becomes Red. [See Fig.3-1].
5. Switch the raster signal to Blue, then to Green and verify the
purity condition.
6. When the position of the deflection yolk has been determined,
fasten the deflection yolk with the screws.
7. If the beam does not land correctly in all the corners, use
magnets to correct it. [See Fig.3-4].
Carry out the following adjustments in this order :
3-1. Beam Landing
3-2. Convergence
3-3. Focus
3-4. White balance
Note :
Test equipment required
1. Color bar/pattern generator.
2. Degausser.
3. Oscilloscope.
4. Digital multimeter.
5. DC Power supply.
Fig. 3-2
Purity Control
For 29" models align the neck assy
as indicated below.
A buckle
Neck Assy
G1 G2
Deflection Yoke
GREEN
RED
BLUE
Fig. 3-3
Purity control corrects
this area.
ab
Disk magnets or
rotatable disk
magnets correct
these areas (a - d).
Fig. 3-1
cd
Deflection yolk positioning
corrects these areas.
a
c
b
d
Fig. 3-4
16










页数 30 页
下载[ KV-29X5L.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
KV-29X5ATRINITRON COLOR TV SERVICE MANUALSony
Sony
KV-29X5BTRINITRON COLOR TV SERVICE MANUALSony
Sony
KV-29X5DTRINITRON COLOR TV SERVICE MANUALSony
Sony
KV-29X5ETRINITRON COLOR TV SERVICE MANUALSony
Sony

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap