DataSheet8.cn


PDF ( 数据手册 , 数据表 ) UP-895

零件编号 UP-895
描述 VIDEO GRAPHIC PRINTER SERVICE MANUAL
制造商 Sony
LOGO Sony LOGO 


1 Page

No Preview Available !

UP-895 数据手册, 描述, 功能
VIDEO GRAPHIC PRINTER
UP-895
UP-895CE
UP-895MD
SERVICE MANUAL
1st Edition
http://www.Datasheet4U.com







UP-895 pdf, 数据表
English
WARNING
To prevent fire or shock hazard, do not expose the unit to
rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
THIS APPARATUS MUST BE EARTHED.
For UP-895MD/895CE
Symbol on the products
This symbol indicates the equipotential
terminal which brings the various parts of a
system to the same potential.
For UP-895MD/895CE
Important safeguards/notices for use in the
medical environments
1. All the equipments connected to this unit shall be
certified according to Standard IEC601-1, IEC950,
IEC65 or other IEC/ISO Standards applicable to the
equipments.
2. When this unit is used together with other equipment in
the patient area*, the equipment shall be either powered
by an isolation transformer or connected via an
additional protective earth terminal to system ground
unless it is certified according to Standard IEC601-1.
* Patient Area
R1.5m
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
For the customers in the U.S.A.
(for UP-895/895MD)
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
This device requires shielded interface cables to comply
with FCC emission limits.
For the customers in Canada
(for UP-895MD)
This unit has been certified according to Standard CSA
C22.2 NO.601.1.
3. The leakage current could increase when connected to
other equipment.
4 This equipment generates, uses, and can radiate
frequency energy. If it is not installed and used in
accordance with the instruction manual, it may cause
interference to other equipment. If this unit causes
interference (which can be determined by unplugging
the power cord from the unit), try these measures:
Relocate the unit with respect to the susceptible
equipment. Plug this unit and the susceptible equipment
into different branch circuit. Consult your dealer.
(According to Standard EN60601-1-2 and CISPR11,
Class B, Group 1)
Caution
When you dispose of the unit or accessories, you must obey
the law in the relative area or country and the regulation in
the relative hospital.
20 Introduction
Table of Contents/Overview
Table of Contents
Introduction
Overview ................................................................. 21
Prepration
Connection .............................................................. 22
Setting Up the Printer ........................................... 22
Setting the Slide Switches on the Paper Tray..... 22
Setting the DIP Switches on the Rear Panel ....... 23
Paper ....................................................................... 25
Loading Paper ........................................................ 26
Operation
Printing ................................................................... 27
Making Printouts ................................................ 27
Selecting the Printing Direction/Image Size ...... 28
Adjusting the Contrast and Brightness ............... 30
Remotely Controlling the Printer ....................... 30
Others
Precautions ............................................................. 31
Maintenance ........................................................... 31
Specifications .......................................................... 32
Troubleshooting ..................................................... 34
Location and Function of Parts ............................ 35
Front ................................................................... 35
Back .................................................................... 36
Overview
The UP-895/895MD/895CE is a black and white video
graphics printer that can be used to print images
displayed on a video monitor.
This manual covers the UP-895/895MD/895CE models.
Wherever the operation or any other item differs among
the models, this manual clearly describes those
differences.
Clear, consistent print quality
• High definition, 12.8 dots/mm printing using a thermal
head with a high-speed drive IC.
• 256 gradations of black and white.
• Stable printouts using temperature compensation
technology
Fast printing
• You can make an A-7 size single printout in about 3.9
seconds in STD and NORM mode.
• You can make a maximum of 11 copies of the same
image continuously.
Two way printing direction and various image
sizes
• The printing direction selector on the front panel
enables you to print in vertical and horizontal
directions.
• The image size selector on the front panel enables you
to select various printing size.
GB
DIP switches and slide switches to optimize
the printer
• You can adjust printout quality and select the paper
type by setting the slide switches.
• You can make printouts starting either from the bottom
or top of the image by setting the DIRECTION of DIP
switch.
• You can set the printout aspect ratio to 4:3 or 1:1 by
setting the ASPECT of DIP switch.
• You can set the range to be printed by setting the
SCAN DIP switch.
• You can save paper by setting the POSTFEED DIP
switch (paper saving function).
Automatic video signal determination
The type of input signal, black and white (EIA or CCIR)
or input color (NTSC or PAL), is automatically
determined and printed in the same duration and size.
Alarm buzzer
The alarm buzzer prevents you from making any
mistakes.
Easy and quick paper loading
You can load paper just by opening the door and placing
the paper roll.
Introduction 21







UP-895 equivalent, schematic
Location and Function of Parts
qa OPEN button (26, 31)
Opens or closes the door. Also, interrupts printing
midway.
When the door is open, you can see the slide
switches in the paper tray.
SHARPNESS
OFF
GAMMA
PAPER TYPE SMOOTHING
OFF ON
1 2 34
1 SHARPNESS switch
Adjusts the sharpness of the printout.
2 GAMMA switch
Sets the tone of the printouts (density gradation).
3 PAPER TYPE switch
Selects the paper type.
4 SMOOTHING switch
Selects the line density.
For detailed information on slide switches, see
“Setting the Slide Switches on the Paper Tray” on
page 22.
qs Paper feeder and cutter
Cuts the printing paper.
Back
1 Equipotential terminal (only for UP-895MD/
895CE)
Used to connect to the equipotential plug to bring the
various parts of a system to the same potential.
Refer to “Important safeguards/notice for use in the
medical environments” on page 20.
2 REMOTE connector (22, 30)
Connect the RM-91 remote commander or the foot
switch for controlling print operation from a
distance.
3 DIP SW (switches) (23)
Sets the print modes and functions.
4 tVIDEO IN (input) connector (BNC type) (22)
Connect to the video output connector of the video
equipment.
5 TVIDEO OUT (output) connector (BNC type)
(22)
Connect to the video input connector of the video
monitor. The output signal type depends on DIP
switch 8 (OUTPUT).
6 -AC IN (AC power input) connector (22)
Connect to a wall outlet using the AC power cord
supplied with the unit.
36 Others










页数 30 页
下载[ UP-895.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
UP-895VIDEO GRAPHIC PRINTER SERVICE MANUALSony
Sony
UP-895CEVIDEO GRAPHIC PRINTER SERVICE MANUALSony
Sony
UP-895MDVIDEO GRAPHIC PRINTER SERVICE MANUALSony
Sony

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap