|
|
零件编号 | ZX62R-AB-5P | ||
描述 | Micro-USB connectors | ||
制造商 | HRS | ||
LOGO | |||
1 Page
NEW
Micro-USB connectors meeting requirements of USB 2.0 Standard
ZX Series
Note: Contact us to ascertain whether a TID number has
been acquired for an individual product.
sOverview
Extremely small high reliability connectors complying with physical,
electrical and environmental requirements of Micro-USB standard
(USB 2.0).
Receptacles and plugs are available in a wide variety of mounting
and termination configurations, permitting their use in various
applications.
sFeatures
1. Size reduction
Compared with the standard Mini-B connectors, the size of ZX
connectors is reduced by approximately 60% while still allowing a
high-speed data transfer of 480 Mbps, specified in USB 2.0.
2. Receptacle styles
Two interface configurations: Micro-B and Micro-AB in standard,
mid-mount and reverse mounting styles.
SMT and through-hole (shell) PC board terminations
3. Plug styles
Corresponding to the receptacle styles, two interface configurations:
Micro-B and Micro-A, with direct wire or PCB wire soldering.
Several plug styles can be used for data transmission, earphone or
charging applications.
4. High durability
Unique contact and lock configuration assures high durability while
maintaining easy insertion / disconnection. Fully mated condition
(when mated with corresponding HRS connector) is confirmed by a
definite tactile sensation
Drop-in
(Mid-mount)
Reverse
(Top mount)
Standard
(Bottom mount)
USB 2.0 Hi-Speed (480 Mbps)
Eye pattern measurement results:
Measured with USB 2.0 cable 2.4 m long
TP2
500ps/div
2010.8
1
http://www.Datasheet4U.com
ZX SeriesqMicro-USB connectors meeting requirements of USB 2.0 Standard
Plugs – assembled (not-terminated, without overmold)
ZX40 - Direct wire soldering
ZX10 - PCB wire soldering
ZX20 - PCB wire soldering
ZX64 - PCB wire soldering
8
Components
ZX40-*-SLDA
Cover-top
ZX40-*-5S-UNIT
Assembly
(insulator/contacts/lock)
*No PCB required
ZX40-SLDB
Cover-bottom
ZX10-B-SLDA
Cover-top
ZX10-B-5S-UNIT
Assembly
(insulator/contacts/lock)
*SMT PCB termination
ZX10-SLDB
Cover-bottom
ZX20-*-SLDC
Cover
ZX20-*-5S-UNIT
Assembly
(insulator/contacts/lock)
*Straight through hole PCB
termination
ZX64-*-SLDA
Cover-top
ZX64-*-5S-UNIT
Assembly
(insulator/contacts/lock)
*Right angle through hole
PCB termination
ZX64-SLDB
Cover-bottom
http://www.Datasheet4U.com
ZX SeriesqMicro-USB connectors meeting requirements of USB 2.0 Standard
sPlugs
qMicro B - Component, Shell/cover – Right angle SMT
Part Number
ZX64-B-SLDC
CL No.
242-0018-4
Packaging
4,000 pieces per reel
Shell/cover, without cable clamp
This shell/cover does not require ZX64-SLDB.
qAssembled
6.85
8 16.1
16
6.85
Assembly
(insulator/contacts/lock)
8.4
Cover-top
Cover-bottom
All dimensions: mm
http://www.Datasheet4U.com
|
|||
页数 | 20 页 | ||
下载 | [ ZX62R-AB-5P.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
ZX62R-AB-5P | Micro-USB connectors | HRS |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |