|
|
零件编号 | AT050TN43-V1 | ||
描述 | LCD Module | ||
制造商 | Innolux | ||
LOGO | |||
1 Page
CHIMEI INNOLUX DISPLAY CORPORATION
LCD MODULE
S P E C I F I C AT I O N
Customer:
Model Name:
SPEC NO.:
Date:
Version:
AT050TN43 V.1
A0 5 0 - 4 3 - T T- 11
2010/05/11
01
Preliminary Specification
Final Specification
For Customer’s Acceptance
Approved by
Comment
Approved by
Joe Lin
2010/05/27
Reviewed by
James Yu
Jack Huang
2010/05/27
Prepared by
David Lee
2010/05/21
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
Free Datasheet http://www.Datasheet4U.com
CHIMEI INNOLUX
3.2.Typical operation conditions
SPEC NO: A050-43-TT-11
Date :2010/05/11
Page:5/17
Item
Symbol
Values
Unit Remark
Min. Typ. Max.
Power voltage
VDD 3.1 3.3 3.5 V
Current for Driver
IDD
-
TBD
TBD
mA VDD = 3.3V
Input logic high voltage
Input logic low voltage
VIH
VIL
0.7 VDD
-
VDD V
Note 1
GND
- 0.3 VDD V
Note1: CLK, DE, R0~ R7,G0~ G7,B0~ B7.
3.3 Backlight Driving Conditions
Item
Symbol
Values
Min. Typ. Max.
Unit
Remark
Voltage for LED Backlight
VL
19.6 21.7 23.8 V Note 1
Current for LED Backlight
IL
36 40 44 mA
LED life time
- 20,000 -
- Hr Note 2
Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25℃ and
IL =40mA.
Note 2: The “LED life time” is defined as the module brightness decrease to 50%
original brightness at Ta=25℃ and IL =40mA. The LED lifetime could be
decreased if operating IL is lager than 40 mA.
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
Free Datasheet http://www.Datasheet4U.com
CHIMEI INNOLUX
5. Reliability Test Items
SPEC NO: A050-43-TT-11
Date :2010/05/11
Page:13/17
(Note3)
Item
Test Conditions
Remark
High Temperature Storage Ta = 80℃
240 hrs
Note 1,Note 4
Low Temperature Storage
Ta = -30℃
240hrs
Note 1,Note 4
High Temperature Operation Ts = 70℃
240hrs
Note 2,Note 4
Low Temperature Operation Ta = -20℃
240hrs
Note 1,Note 4
Operate at High Temperature
and Humidity
+60℃, 90% RH
240 hrs
Note 4
Thermal Shock
-30℃/30 min ~ +80℃/30 min for a total
100 cycles, Start with cold temperature
and end with high temperature
Note 4
Vibration Test
Mechanical Shock
Package Vibration Test
Frequency range:10~55Hz
Stroke:1.5mm
Sweep:10Hz~55Hz~10Hz
2 hours for each direction of X. Y. Z.
(6 hours for total)
100G 6ms,±X, ±Y, ±Z 3 times for each
direction
Random Vibration :
0.015G*G/Hz from 5-200HZ,
-6dB/Octave from 200-500HZ
2 hours for each direction of X. Y. Z.
(6 hours for total)
Package Drop Test
Height:60 cm
1 corner, 3 edges, 6 surfaces
Electro Static Discharge
± 2KV, Human Body Mode,
100pF/1500Ω
Note 1: Ta is the ambient temperature of samples.
Note 2: Ts is the temperature of panel’s surface.
Note 3: In the standard condition, there shall be no practical problem that may affect the
display function. After the reliability test, the product only guarantees operation,
but doesn’t guarantee all the cosmetic specification.
Note 4: Before cosmetic and function tests, the product must have enough recovery
time, at least 2 hours at room temperature.
The copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.
Free Datasheet http://www.Datasheet4U.com
|
|||
页数 | 20 页 | ||
下载 | [ AT050TN43-V1.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
AT050TN43-V1 | LCD Module | Innolux |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |