DataSheet8.cn


PDF ( 数据手册 , 数据表 ) DI-750

零件编号 DI-750
描述 (DI-750 / DI-760) Portable Analog and Digital I/O System
制造商 DATAQ
LOGO DATAQ LOGO 


1 Page

No Preview Available !

DI-750 数据手册, 描述, 功能
The way PC-based instrumentation should be
DI-500/510 Series
Portable Analog and Digital I/O System
DI-750/760 Series
Desktop/Rackmount Analog and Digital I/O System
User's Manual
Manual Revision F
Software Release Level 1
Copyright © 2005 by DATAQ Instruments, Inc. The Information contained herein is the exclusive property of
DATAQ Instruments, Inc., except as otherwise indicated and shall not be reproduced, transmitted, transcribed, stored
in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic,
mechanical, magnetic, optical, chemical, manual, or otherwise without expressed written authorization from the com-
pany. The distribution of this material outside the company may occur only as authorized by the company in writing.
DATAQ Instruments' hardware and software products are not designed to be used in the diagnosis and treatment of
humans, nor are they to be used as critical components in any life-support systems whose failure to perform can rea-
sonably be expected to cause significant injury to humans.
DATAQ, the DATAQ logo, and WINDAQ are registered trademarks of DATAQ Instruments, Inc. All rights reserved.
DATAQ Instruments, Inc.
241 Springside Drive
Akron, Ohio 44333 U.S.A.
Telephone: 330-668-1444
Fax: 330-666-5434
Designed and manufactured in the
United States of America
Free Datasheet http://www.datasheet4u.com/







DI-750 pdf, 数据表
Free Datasheet http://www.datasheet4u.com/







DI-750 equivalent, schematic
DI-500/510 Series and DI-750/760 Series Hardware Manual
For example, in the previous 64-channel example, the first or top bank of 32 channels now become channels A1
through A32 and the second (the bottom bank on portable models) bank of 32 channels become channels B1 through
B32.
The “channel 28” ambiguity disappears, the channel in question is either channel A28 or channel B28. Note that the
above table is for stand-alone instruments only. If you have several DI-500/510 or DI-750/760 Series instruments
multiplexed together, refer to the following section for labeling information.
Increasing the Total Analog Input Channel Capacity
The 37-pin connectors (labeled AUXILIARY PORT and EXPANSION on DI-500-16, DI-750-16, DI-510-48, and
DI-760-48 instruments, or EXPANSION IN and EXPANSION OUT on all other instruments) are used for system
expansion. Additional DI-500/510 and DI-750/760 Series instruments can be “daisy chained” together to increase
channel capacity. Up to 240 analog channels can be acquired by connecting combinations of DI-500/510 and DI-750/
760 Series instruments together. The following illustration shows a typical 128 channel configuration, consisting of a
DI-510-64 (64 input portable instrument) and a DI-510-64-X (64 input portable expansion unit):
To Printer Port of PC
DI-510-64
DI-510-64-X
Printer Port
Expansion IN
Expansion OUT
Expansion Cable
Expansion IN
Expansion OUT
"Master"
"Slave"
When several instruments are connected together, one instrument becomes the “master” instrument and all others
become “slave” instruments. The “master” is always defined as the instrument connected directly to the PC. A
“slave” is defined as an instrument that is connected to the master (or not connected directly to the PC). Note that it is
possible to have any number of slave instruments in a configuration (up to 240 total channels), but always only one
master instrument. The expansion cable is always connected from the EXPANSION OUT port to the EXPANSION
IN port of the next instrument, moving in a direction away from the PC.
The DI-500-16, DI-750-16, DI-510-48, and DI-760-48 are master instruments only. They can be expanded (by adding
slave instruments) but they can never be used as a slave instrument.
All of the expansion instruments in the DI-500/510 and DI-750/760 Series (i.e., DI-510-32-X and DI-760-32-X) are
slave instruments. They have no printer port so they can never be configured as a master instrument (connected
directly to the PC) and cannot be used alone (they must be connected to a master instrument).
The DI-510-32, DI-760-32, DI-510-64, and DI-760-64 Instruments can be used as masters or as slaves. They can be
connected directly to the PC as stand-alone master instruments or they can be connected as slave channel expansion
Getting Started
10
Free Datasheet http://www.datasheet4u.com/










页数 50 页
下载[ DI-750.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
DI-750(DI-750 / DI-760) Portable Analog and Digital I/O SystemDATAQ
DATAQ

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap