|
|
零件编号 | ABC020004B21-BIW-R-01 | ||
描述 | LCM MODULE | ||
制造商 | AV-Display | ||
LOGO | |||
1 Page
深圳秋田微电子有限公司
地址:深圳市龙岗区横岗镇荷坳金源工业区金源路 39 号
电话:(086)0755-88860696 传真: (086)0755 -26911092
网址:Http://www.av-display.com.cn
SHENZHEN AV-DISPLAY CO.,LTD
Address: No. 39, Jinyuan Road, He’ao Jinyuan
industrial zone, Henggang Town, Long Gang
district, Shenzhen, China
TEL: (086)0755-88860696 FAX: (086)0755-26911092
Http://www.av-display.com.cn
SPECIFICATION
FOR
LCM MODULE
MODULE NO.: ABC020004B21-BIW-R-01
DOC.REVISION 00
Customer Approval:
PREPARED BY
(RD ENGINEER)
PREPARED BY
(QA ENGINEER)
CHECKED BY
APPROVED BY
SIGNATURE
DATE
NOV-12-2007
Free Datasheet http://www.datasheet4u.com/
10. TIMING CHARACTERISTICS
Write mode(writing data from MPU to SPLC780D)
Read mode( reading data from SPLC780D to MPU)
Write mode timing diagram(Writing data from MPU to SPLC780D)
Read mode timing diagram(Reading data from SPLC780D to MPU)
5
Free Datasheet http://www.datasheet4u.com/
12.3 Reliability of LCM
Reliability test condition:
Item
Condition
Time (hrs)
Assessment
High temp. Storage
High temp. Operating
Low temp. Storage
Low temp. Operating
Humidity
Temp. Cycle
80°C
70°C
-30°C
-20°C
40°C/ 90%RH
-20°C ← 25°C →70°C
(30 min ← 5 min → 30min)
48
48
48 No abnormalities
48 in functions
48 and appearance
10cycles
Recovery time should be 24 hours minimum. Moreover, functions, performance and appearance
shall be free from remarkable deterioration within 50,000 hours under ordinary operating and storage
conditions room temperature (20+8°C), normal humidity (below 65% RH), and in the area not
exposed to direct sun light.
12.4 Precaution for using LCD/LCM
LCD/LCM is assembled and adjusted with a high degree of precision. Do not attempt to make any
alteration or modification. The followings should be noted.
General Precautions:
1. LCD panel is made of glass. Avoid excessive mechanical shock or applying strong pressure onto
the surface of display area.
2. The polarizer used on the display surface is easily scratched and damaged. Extreme care should
be taken when handling. To clean dust or dirt off the display surface, wipe gently with cotton, or
other soft material soaked with isoproply alcohol, ethyl alcohol or trichlorotriflorothane, do not
use water, ketone or aromatics and never scrub hard.
3. Do not tamper in any way with the tabs on the metal frame.
4. Do not made any modification on the PCB without consulting AV.
5. When mounting a LCM, make sure that the PCB is not under any stress such as bending or
twisting. Elastomer contacts are very delicate and missing pixels could result from slight
dislocation of any of the elements.
13
Free Datasheet http://www.datasheet4u.com/
|
|||
页数 | 18 页 | ||
下载 | [ ABC020004B21-BIW-R-01.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
ABC020004B21-BIW-R-01 | LCM MODULE | AV-Display |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |