DataSheet8.cn


PDF ( 数据手册 , 数据表 ) LP104V2-W

零件编号 LP104V2-W
描述 Liquid Crystal Display
制造商 LG
LOGO LG LOGO 


1 Page

No Preview Available !

LP104V2-W 数据手册, 描述, 功能
Product Specification
LP104V2-W
Liquid Crystal Display
SPECIFICATION
For
APPROVAL
( ) Preliminary Entry Level Specification
( x ) Final Specification
Title 10.4” VGA TFT LCD
BUYER NAME
MODEL NAME
SIGNATURE
/
DATE
/
/
Please return 1 copy for our confirmation
with your signature and comments.
SUPPLIER
MODEL NAME
LG Philips LCD
LP104V2-W
www.DataSheet.net/
APPROVED BY
DATE
/G.Manager
REVIEWED BY
/S.Engineer
PREPARED BY
/ Engineer
Product Engineering Dept.
LG Philips LCD
Version 1.0 NOV./98
Page 1/19
Datasheet pdf - http://www.DataSheet4U.co.kr/







LP104V2-W pdf, 数据表
Product Specification
LP104V2-W
Liquid Crystal Display
6. Interface Pin Configuration
Used connector : DF9B-31P-1V(HIROSE), Matching side : DF9B-31S-1V(HIROSE)
Pin Symbol
1 GND
2 CLK
3 Hsync
4 Vsync
5 GND
6 R0
7 R1
8 R2
9 R3
10 R4
11 R5
12 GND
13 G0
14 G1
15 G2
16 G3
17 G4
18 G5
19 GND
20 B0
21 B1
22 B2
23 B3
24 B4
25 B5
26 GND
27 DTMG
28 VDD
29 VDD
30 NC
31 NC
Table 5 INTERFACE PIN CONFIGURATION
Description
Notes
Ground
Data clock
Horizontal sync.
Vertical sync.
Ground
Red data(LSB)
Red data
Red data
Red data
Red data
Red data(MSB)
Ground
Green data(LSB)
Green data
Green data
Green data
Green data
Green data(MSB)
Ground
Blue data(LSB)
Blue data
Blue data
Blue data
Blue data
Blue data(MSB)
Ground
Data timing signal
Power supply +3.3V
Power supply +3.3V
No connection
No connection
I/F PIN ARRANGEMENT
(Transparent view) 3
2 1 LCD PANEL
43
28 29
30 31
www.DataSheet.net/
TOP VIEW
* NC (30, 31pin) should be electrically opened
during operation.
* The metal top case is connected to GND.
* All GND(ground) pins should be connected
together and to Vss which also be connected
to the LCD’s metal frame.
* All Vdd(power input) pins should be connected
together.
The backlight interface connector is a model BHR-03VS-1, manufactured by JST. The mating connector part number is
SM02(0.8)B-BHS-1-TB or equivalent. The pin configuration for the connector is shown in the table below.
Table 6 BACKLIGHT CONNECTOR PIN CONFIGURATION
Pin
Symbol
Description
Notes
1
HV Lamp power input
1
2 NC
NC
3 LV Ground
2
Notes: 1. The input power terminal is colored pink. Ground pin color is black.
2. The backlight ground should be common with Vss.
Version 1.0 NOV./98
Page 8/19
Datasheet pdf - http://www.DataSheet4U.co.kr/







LP104V2-W equivalent, schematic
Product Specification
LP104V2-W
Liquid Crystal Display
17.PRECAUTIONS
Please pay attention to the followings when you use this TFT/LCD module with Back-light unit.
17.1 MOUNTING PRECAUTIONS
(1) You must mount a module using holes arranged in four corners.
(2) You should consider the mounting structure so that uneven force (ex. twisted stress)
is not applied to the module.
And the case on which a module is mounted should have sufficient strength so that
external force is not transmitted directly to the module.
(3) Please attach the surface with a transparent protective plate in order to protect the
polarizer LC cell.
Transparent protective plate should have sufficient strength in order to resist
external force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not desirable
because the former generates corrosive gas of attacking the polalizer at high
temperature and the latter causes circuit break by electro-chemical reaction.
(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything
harder than HB pencil head.
And Please do not rub with dust clothes with chemical treatment.
Do not touch the surface df polarizer for bare hand or greasy cloth. (Some cosmetics
are detrimental to the polarizer.)
(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft
materials like chamois soaked with petrolium benzene. Normal-hexane is recommended for
cleaning the adhesives used to attach front / rear polarizers. Do not use acetone,
toluen and alcohol because they cause chemical damage to the polarizer.
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with
polarizer causes deformations and color fading. www.DataSheet.net/
(9) Do not open the case because inside circuits do not have sufficient strength.
17.2 OPERATING PRECAUTIONS
(1) The spike noise causes the mis-operation of circuits. It should be lower than
following voltage :
VDD = ± 200mV, V1 = ± 200mV (Over and under shoot voltage).
(2) Response time depends on the temperature. (In lower temperature, it becomes longer.)
(3) Brightness depends on the temperature. (In lower temperature, it becomes lower.)
And in lower temperature, response time (required time that brightness is stable after
turned on ) becomes longer.
(4) Be careful for condensation at sudden temperature change. Condensation makes damage to
polarizer or electrical contacted parts. And after fading condensation, smear or spot
will occur.
(5) When fixed patterns are displayed for a long time, remnant image is likely to occur.
(6) A module has high frequency circuit. If you need to shield the electromagnetic noise,
please do in yours.
(7) When a Back-light unit is operating, it sounds. If you need to shield the noise,
please do in yours.
17.3 ELECTROSTATIC DISCHARGE CONTROL
Since a module is composed of electronic circuits. it is not strong to electrostatic discharge. Make
certain that treatment persons are connected to ground through wrist band etc . . And don’t touch I/F
pin directly.
Version 1.0 NOV./98
Page 16/19
Datasheet pdf - http://www.DataSheet4U.co.kr/










页数 19 页
下载[ LP104V2-W.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
LP104V2-WLiquid Crystal DisplayLG
LG

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap