DataSheet8.cn


PDF ( 数据手册 , 数据表 ) 2SC4093-T2

零件编号 2SC4093-T2
描述 MICROWAVE LOW NOISE AMPLIFIER NPN SILICON EPITAXIAL TRANSISTOR 4 PINS MINI MOLD
制造商 NEC
LOGO NEC LOGO 


1 Page

No Preview Available !

2SC4093-T2 数据手册, 描述, 功能
DDAATTAA SSHHEEEETT
SILICON TRANSISTOR
2SC4093
MICROWAVE LOW NOISE AMPLIFIER
NPN SILICON EPITAXIAL TRANSISTOR
4 PINS MINI MOLD
DESCRIPTION
The 2SC4093 is an NPN silicon epitaxial transistor designed for low
noise amplifier at VHF, UHF and CATV band.
It has large dynamic range and good current characteritics, and is
contatined in a 4 pins mini-mold package which enables high-isolation
gain.
FEATURES
• Low Noise
NF = 1.1 dB TYP. @ VCE = 10 V, IC = 7 mA, f = 1.0 GHz
• High Power Gains
S21e2 = 13 dB TYP. @ VCE = 10 V, IC = 20 mA, f = 1.0 GHz
ORDERING INFORMATION
PART
NUMBER
QUANTITY
PACKING STYLE
2SC4093-T1
3 Kpcs/Reel. Embossed tape 8 mm wide.
Pin3 (Base), Pin4 (Emitter) face to perforation side
of the tape.
2SC4093-T2
3 Kpcs/Reel. Embossed tape 8 mm wide.
Pin1 (Collector), Pin2 (Emitter) face to perforation
side of the tape.
* Please contact with responsible NEC person, if you require evaluation
sample.
Unit sample quantity shall be 50 pcs. (Part No.: 2SC4093)
ABSOLUTE MAXIMUM RATINGS (TA = 25 C)
Collector to Base Voltage
VCBO
20
Collector to Emitter Voltage VCEO
12
Emitter to Base Voltage
VEBO
3.0
Collector Current
IC 100
Total Power Dissipation
PT
200
Junction Temperature
Storage Temperature
Tj 150
Tstg 65 to +150
V
V
V
mA
mW
C
C
PACKAGE DIMENSIONS
(Units: mm)
2.8
+0.2
0.3
1.5
+0.2
0.1
5° 5°
5° 5°
PIN CONNECTIONS
1. Collector
2. Emitter
3. Base
4. Emitter
Document No. P10365EJ3V1DS00 (3rd edition)
Date Published March 1997 N
Printed in Japan
© 1991







2SC4093-T2 pdf, 数据表
2SC4093
No part of this document may be copied or reproduced in any form or by any means without the prior written
consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this
document.
NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a device described herein or any other liability arising
from use of such device. No license, either express, implied or otherwise, is granted under any patents,
copyrights or other intellectual property rights of NEC Corporation or others.
While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices,
the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or
property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety
measures in its design, such as redundancy, fire-containment, and anti-failure features.
NEC devices are classified into the following three quality grades:
"Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on
a customer designated "quality assurance program" for a specific application. The recommended applications
of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each
device before using it in a particular application.
Standard: Computers, office equipment, communications equipment, test and measurement equipment,
audio and visual equipment, home electronic appliances, machine tools, personal electronic
equipment and industrial robots
Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems or medical equipment for life support, etc.
The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books.
If customers intend to use NEC devices for applications other than those specified for Standard quality grade,
they should contact an NEC sales representative in advance.
Anti-radioactive design is not implemented in this product.
M4 96. 5














页数 8 页
下载[ 2SC4093-T2.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
2SC4093-T1MICROWAVE LOW NOISE AMPLIFIER NPN SILICON EPITAXIAL TRANSISTOR 4 PINS MINI MOLDNEC
NEC
2SC4093-T2MICROWAVE LOW NOISE AMPLIFIER NPN SILICON EPITAXIAL TRANSISTOR 4 PINS MINI MOLDNEC
NEC

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap