DataSheet8.cn


PDF ( 数据手册 , 数据表 ) SM04B-PASS-*

零件编号 SM04B-PASS-*
描述 CONNECTOR
制造商 JST
LOGO JST LOGO 


1 Page

No Preview Available !

SM04B-PASS-* 数据手册, 描述, 功能
2.0mm
(.079") pitch
PA FAMILY SERIES/PA•PAF•PAL CONNECTOR
Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC)
Features ––––––––––––––––––––––––
• Secure locking device
The housing has a locking device to prevent accidental
disconnection because of routing of wires or of vibration, and
also reverse and different circuit numbers mating.
• Interchangeable between crimp and IDC socket
Both crimp and IDC sockets use the same headers and wire-to-
wire mating halves.
• Secondary retainers
Secondary retainers enhance safety in case of partial insertion
or accidental release of the contact.
• Harness variation
PAL, wire-to-wire crimp style connector, increases wire harness variation.
Based upon wire-to-board crimp style PA
connectors, the PA series family of
connector have been expanded to meet the
requirement of complex wire harness of
2.0mm (.079") pitch connectors with secure
locking mechanism thanks to the
additional line up of wire-to-board IDC style
PAF connectors and wire-to-wire crimp
style PAL connectors.
Retainer
PAF Receptacle
(IDC style)
PA Shorouded header
(Top entry type)
Retainer
Retainer
PA Receptacle
(Crimp style Standard type)
PA Receptacle
(Crimp style Retainer mountable type)
PAF Receptacle
(IDC style)
PAL
(Crimp style Wire-to-wire)
PA Shorouded header
(Side entry type)
PA Shorouded header
(Top entry type)
Retainer
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1Certified LR20812
PA connector
(Standard type, Retainer mountable type)
• Highly reliable contact
The box contact supplies stable contact performance even under
conditions of vibration, distortion, low voltage or low current.
• Insertion guide mechanism
Header has housing insertion guides for easy and secure insertion.
• Flanged press pin
Top entry type header has flanged press pins, preventing
accidental removal of the pins that might result from the
distorted unmating especially in the case of small No. of circuits.
PAF connector
• The industry’s first secure lock IDC connectors
By separating ID section and secure lock section, the industrys first
secure lock specification has been achieved for IDC that was said
to be impossible. Our fully automatic IDC machines, BCD-M5BP
(for simple harness) and CAM-M12B, SAD-M12E (for multi-
harness), can be applied for harness making.
• Metallic strain relief
Metallic strain relief on the contact securely grips wire insulation that
can avoid direct stress of vibration or impact. The same grip strength
as insulation barrel of crimp style contact could be achieved.
• Retainer with four locking points
The new four locking points design ensures wire retention force
of every direction that is almost superior to contact retention
force of crimp style connectors. It also completely covers
exposed terminated ID contact.
PAL connector
• The industry’s first wire to wire 2.0mm (.079")
pitch retainer mountable type connector.
• Either with or without panel lock can be
selected according to application.
61
www.DataSheet.in







SM04B-PASS-* pdf, 数据表
PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
Shrouded header <High box type> –––––––––––––––––––––––––––––––––––––––––––
(2 circuits) B 7.1(.280)
A 5.3(.209)
(5, 6 circuits)
B
A
2.0
(.079)
7.1(.280)
5.3(.209)
Circuit No.1
(3 circuits)
2.0
(.079)
B
A
7.1(.280)
5.3(.209)
Circuit No.1
(7 to 9 circuits)
B
A
2.0
(.079)
7.1(.280)
5.3(.209)
(4 circuits)
Circuit No.1
B 7.1(.280)
A
2.0 5.3(.209)
(.079)
Circuit No.1
(10 to 12, 15 circuits)
B
A
2.0
(.079)
7.1(.280)
5.3(.209)
Circuit No.1
Circuits
2
3
4
5
6
7
8
9
10
11
12
15
Model No.
Without a boss With a boss
BH02B-PASK BH02B-PASK-1
BH03B-PASK BH03B-PASK-1
BH04B-PASK BH04B-PASK-1
BH05B-PASK BH05B-PASK-1
BH06B-PASK BH06B-PASK-1
BH07B-PASK BH07B-PASK-1
BH08B-PASK BH08B-PASK-1
BH09B-PASK BH09B-PASK-1
BH10B-PASK BH10B-PASK-1
BH11B-PASK BH11B-PASK-1
BH12B-PASK BH12B-PASK-1
BH15B-PASK BH15B-PASK-1
Dimensions mm(in.)
AB
2.0( .079) 6.0( .236)
4.0( .157) 8.0( .315)
6.0( .236) 10.0( .394)
8.0( .315) 12.0( .472)
10.0( .394) 14.0( .551)
12.0( .472) 16.0( .630)
14.0( .551) 18.0( .709)
16.0( .630) 20.0( .787)
18.0( .709) 22.0( .866)
20.0( .787) 24.0( .945)
22.0( .866) 26.0(1.024)
28.0(1.102) 32.0(1.260)
Q'ty /
box
900
675
550
450
375
325
300
275
250
225
200
150
Material and Finish
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Glass-filled PBT, UL94V-0, natural (white)
68
www.DataSheet.in
Circuit No.1














页数 15 页
下载[ SM04B-PASS-*.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
SM04B-PASS-*CONNECTORJST
JST
SM04B-PASS-1-*CONNECTORJST
JST

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap