|
|
零件编号 | L8045 | ||
描述 | Red LED | ||
制造商 | Hamamatsu | ||
LOGO | |||
1 Page
LED
www.DataSheet4U.com
Red LED for optical link
L8045
Emitter for 50 Mbps optical link
L8045 is optical communication devices designed for POF (Plastic Optical Fiber) data links. L8045 is a highly reliable, high-
power LED that emits red light with a peak at 650 nm optimized for POF. A mini-lens is molded on the package for efficient coupling
to a POF. When used with our recommended driver circuit, a 50 Mbps transmitter can be configured at low cost.
Features
Applications
l Peak wavelength: 650 nm
l High reliability
l High output
l Designed to be used with S8046 or S7141-10
l High-speed data transmission even under poor environmental
conditions with high noise
s Absolute m axim um ratings (Ta=25 °C)
Parameter
Symbol
Value
Forward current
IF
40
Reverse voltage
VR
5
Power dissipation *1
Pmax
250
Operating temperature
Topr
-40 to +85
Storage temperature
Tstg
-40 to +85
Soldering
- 230 °C, 5 s, at least 1.8 mm away from package surface
*1: Derate power dissipation at a rate of -1.75 mW /°C above Ta=25 °C
Unit
mA
V
mW
°C
°C
-
s Electrical and optical characteristics (Ta=25 °C)
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Data rate
fD NRZ
DC - 50 Mbps
Forward voltage
VF IF=20 mA
- 1.9 2.3 V
Reverse current
IR VR=5 V
- - 10 µA
Peak wavelength
λp IF=20 mA
- 650 - nm
Spectral half width (FW HM)
Fiber-coupled optical output
∆λ IF=20 mA
Po *2
- 20
-13 -
- nm
-8 dBm
Rise time at pulse drive
tr *2 20 to 80 %
- - 8 ns
Fall time at pulse drive
tf *2 80 to 20 %
- - 8 ns
Pulse distortion
∆T *2
-3 - +1 ns
Jitter
∆tj *2
- - 3 ns
*2: Input is a pseudo-random bi-phase signal at 50 Mbps.
Average value (duty ratio 50 %) measured by using a plastic fiber of φ1 mm. SI-POF and NA=0.5 (GH4001 made by
Mitsubishi Rayon).
Measured with the recommended driver circuit shown below. (Measurement conditions: Vcc=4.5 to 5.5 V, R1=750 Ω ,
R2=2.2 kΩ, R3=22 Ω, C1=35 pF)
Vcc
Icc
SIGNAL INPUT
4.7 mF
1 14 74ACT08
23
7
R1
C1
0.1 mF R2
L8045
1
R3 2
3
4
KLEDC0018EB
Note:
· A bypass capacitor (0.1 µF) and another capacitor (4.7 µF) are connected between Vcc and GND at a position within 3 mm from
the lead.
· The center of the optical fiber is aligned with the center of the lens on the package. The distance between the fiber end and the
lens is 0.1 mm.
1
|
|||
页数 | 2 页 | ||
下载 | [ L8045.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
L8045 | Red LED | Hamamatsu |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |