DataSheet8.cn


PDF ( 数据手册 , 数据表 ) LC78632RE

零件编号 LC78632RE
描述 Compact Disk Player DSP
制造商 Sanyo Semicon Device
LOGO Sanyo Semicon Device LOGO 


1 Page

No Preview Available !

LC78632RE 数据手册, 描述, 功能
Ordering number : EN*5826
CMOS LSI
LC78632RE
Compact Disk Player DSP
Preliminary
Overview
The LC78632RE is a compact disc D/A signal-processing
LSI for Video-CD players that provides a variable clock
error correction (VCEC) mode. The LC78632RE
demodulates the EFM signal from the optical pickup and
performs de-interleaving, error detection, error correction,
digital filtering, and other processing. The LC78632RE
includes an on-chip 1-bit D/A converter, and executes
commands sent from a control microprocessor.
Features
• VCEC support
• Built-in PLL circuit for EFM detection (supports 4×
playback)
• 18KB RAM on chip
• Error detection and correction (corrects two errors in C1
and four errors in C2)
• Frame jitter margin: ±8 frames
• Frame synchronization signal detection, protection, and
insertion
• Dual interpolation adopted in the interpolation circuit.
• EFM data demodulation
• Subcode demodulation
• Zero-cross muting adopted
• Servo command interface
• 2fs digital filter
• Digital de-emphasis
• Built-in independent left- and right-channel digital
attenuators (239 attenuation steps)
• Supports the bilingual function
• Left/right swap function
• Built-in 1-bit D/A converter (third-order ∆∑ noise
shaper, PWM output)
• Built-in digital output circuit
• CLV servo
• Arbitrary track jumping (of up to 255 tracks)
• Variable sled voltage (four levels)
• Six extended I/O ports and 2 extended output ports
• Built-in oscillator circuit using an external 16.9344 MHz
or 33.8688 MHz (for 4× playback) element
• Supply voltage: 4.5 to 5.5 V
Package Dimensions
unit: mm
3174-QFP80E
[LC78632RE]
SANYO: QFP80E
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
D3097HA (OT) No. 5826-1/9







LC78632RE pdf, 数据表
LC78632RE
Pin Functions
Pin No.
Symbol
I/O
Function
1
VPDO
O Test output
2
PDO2
O Double-speed and quad-speed mode playback PLL charge pump output. Must be left open if unused.
3
PDO1
O Normal-speed mode playback PLL charge pump output
4 AVSS
5 FR
Analog system ground. Must be connected to 0 V.
Built-in VCO frequency range setting resistor connection
6 AVDD
7 ISET
Analog system power supply
PDO1 and PDO2 output current setting resistor connection
8 TAI I Test input. A pull-down resistor is built in. Must be connected to 0 V.
9
EFMO
O EFM signal output
10 VSS
Digital system ground. Must be connected to 0 V.
11
EFMI
I EFM signal input
12
TEST1
I Test input. A pull-down resistor is built in. Must be connected to 0 V.
13
CLV+
O Spindle servo control output. CLV+ outputs a high level for acceleration, and CLVoutputs a high level for
14
CLV
O deceleration.
Rough servo/phase control automatic switching monitor output. A high-level output indicates rough servo, and a
15 V/P O low-level output indicates phase control.
16
TEST2
I Test input. A pull-down resistor is built in. Must be connected to 0 V.
17
TEST3
I Test input. A pull-down resistor is built in. Must be connected to 0 V.
18 P4 I/O I/O port
19 HFL I Track detection signal input. This is a Schmitt input.
20
TES
I Tracking error signal input. This is a Schmitt input.
21
PCK
O EFM data playback bit clock monitor. Outputs 4.3218 MHz when the phase is locked in normal-speed mode
playback.
Synchronization signal detection output. Outputs a high level when the synchronization signal detected from the
22
FSEQ
O EFM signal matches the internally generated synchronization signal.
23
TOFF
O Tracking off output
24
TGL
O Tracking gain switching output. Increase the gain when this pin outputs a low level.
25
THLD
O Tracking hold output
26
TEST4
I Test input. A pull-down resistor is built in. Must be connected to 0 V.
27 VDD
Digital system power supply
28 JP+ O Track jump output. JP+ outputs a high level both for acceleration during outward direction jumps and for
deceleration during inward direction jumps. JPoutputs a high level both for acceleration during inward direction
29 JPO jumps and for deceleration during outward direction jumps.
30
SLD+
O
31
SLD
Sled output. This pin can be set to 1 of 4 levels by commands sent from the system control microprocessor.
O
32
EMPH
O De-emphasis monitor. A high level indicates that a disk requiring de-emphasis is being played.
33 P5 I/O I/O port
34
LRCKO
O
LR clock output
35
DFLRO
O Digital filter outputs LR data output. The digital filter can be turned off with the DFOFF command.
36
DACKO
O
Bit clock output
37
CONT1
O Output port
38
P0/DFCK
I/O I/O port. DF bit clock input in antishock mode.
39
P1/DFIN
I/O I/O port. DF data input in antishock mode.
I/O port. Used as the de-emphasis filter on/off switching pin in antishock mode. The de-emphasis filter is turned
40 P2 I/O on when this pin is high.
41
P3/DFLR
I/O I/O port output or digital filter LR clock input (when anti-shock mode)
42
LRSY
O
LR clock output
43
CK2
O
ROMXA pins
44
ROMXA
O
45 C2F O
Bit clock output. The polarity can be inverted with the CK2CON command.
Interpolated data output. Data that has not been interpolated can be output by issuing
the ROMXA command.
C2 flag output
46
MUTEL
O
Left channel mute output
47 LVDD
Left channel power supply
48
LCHP
O One-bit D/A
Left channel P output
49
LCHN
O converter pins
Left channel N output
50 LVSS
Left channel ground. Must be connected to 0V.
Note: Of the general-purpose I/O ports, any unused input ports must be connected to 0 V, or set to be output ports.
Continued on next page.
No. 5826-8/9














页数 9 页
下载[ LC78632RE.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
LC78632RECompact Disk Player DSPSanyo Semicon Device
Sanyo Semicon Device

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap