DataSheet8.cn


PDF ( 数据手册 , 数据表 ) V600-HAM91

零件编号 V600-HAM91
描述 Intelligent Flag I/II
制造商 Omron
LOGO Omron LOGO 


1 Page

No Preview Available !

V600-HAM91 数据手册, 描述, 功能
Intelligent Flag I/II
V600-HA
Innovative RFID Electronic Flags to
Replace Mechanical Flag and Kanban
Systems
• Doesn't need a program and can be used like a sensor.
• Advanced line construction at minimal cost.
• Saves space.
• Precise installation not required (Transmission distance:
www.DataSh1e0et04Um.cmommax.).
• A verification function provided on multi-functional type.
• Addition of 16-bit models to the series responds to applica-
tions from Kanban to quality control.
• Equipped with a wiring reduction mode and communications
parity check function (16-bit models).
• Both NPN and PNP output available.
• FCC certified.
Ordering Information/Specifications
Amplifier
Type
Read-only (8-bit)
Multi-functional (8-bit)
Read-only (16-bit)
Item
Model V600-HAR91
V600-HAR81
V600-HAM91
V600-HAM81
V600-HAR92
Power supply
24 VDC ±10%, ripple (p-p): 10%
Current consumption 130 mA max.
Input
Transistor output or contact output
Short-circuit current: 3 mA (typical) (IN terminal and 0-V short-circuit)
OFF voltage:
15 to 30 VDC
ON voltage:
0 to 5 VDC
Input impedance: 8.2 k
Applied voltage: 30 VDC max.
Transistor output
OFF voltage:
15 to 30 VDC
Input impedance:
8.2 k
Short-circuit current:
3 mA (typical) (for 0-V short-circuit of
INHIBIT/TRG)
ON voltage:
0 to 5 VDC
Applied voltage:
30 VDC max.
Output
NPN open collector
output, 20 mA max. at
30 VDC, residual volt-
age: 2 V max.
PNP open collector
output, 20 mA max.
at 30 VDC, residual
voltage: 2 V max.
NPN open collector PNP open collector out- NPN open collector output, 20 mA
output, 20 mA max. at put, 20 mA max. at 30 max. at 30 VDC, residual voltage: 2 V
30 VDC, residual volt- VDC, residual voltage: 2 V max.
age: 2 V max.
max.
Diagnostic functions Checks for CPU errors and transmission errors
Insulation resistance 50 Mmax. (at 500 VDC) between cable terminals and case
Dielectric strength 500 VAC, 50/60 Hz for 1 min between cable terminals and case (leakage current: 1 mA max.)
2 Intelligent Flag I/II V600-HA







V600-HAM91 pdf, 数据表
Circuit Configuration
V600-HAR91
V600-HAM91
Input Circuit
24 V
ON/
OFF
Tr
IN
0V
8.2 k
Output Circuit
Main circuit
Main circuit
www.DataSheet4U.com
OUT
0V
V600-HAR92
Input Circuit
24 V
ON/
OFF
Tr
IN
0V
8.2 k
Output Circuit
Main circuit
Main circuit
OUT
0V
V600-HAR81
V600-HAM81
Input Circuit
+DC
Tr IN
8.2 k
Main circuit
0V
Output Circuit
Main circuit
+DC
OUT
0V
Precautions
Cautions
!Caution
Be sure to house the V600-HA@91/-HA@81/-HA@92 together with
their connectors and cable in control boxes when using them and
do not expose them to water, oil, dust, metal powder, corrosive
gas, or organic solvent, otherwise they may malfunction, suffer
damage, or burn.
!Caution
The connectors of the V600-HA@91/-HA@81/-HA@92 can be
mounted to metal plates, provided that there is an insulation plate
with a thickness of 1.5 mm minimum between each of the connec-
tors and metal plates.
Input/Output
The Data Input and Data Output lines are set to “1" when the transis-
tor turns ON and to “0" when it turns OFF.
Do not use a solid-state output with the following ratings with the
V600-HAM91/-HAM81, otherwise an external input error may result.
1. Maximum switching current: 1 A min.
2. Minimum switching current: 10 mA min.
3. Response time (ON to OFF): 3 ms min.
The following OMRON products cannot be connected to this product.
CVM1-OD219, C20H, C28H, C40H, or C60H Programmable
Controllers
Sensor Controllers other than from the S3D2 Series
When using a contact output, pay careful attention to chattering and
to the minimum switching current. Also note that the minimum switch-
ing current may be specified for some solid-state outputs.
When connecting an inductive load or an electrical device that tends
to generate noise to the output, connect a diode in parallel with the
load. Connect the cathode side of the diode to the positive side of the
power source.
L
Open collector output
Diode
DC
power supply
Diode
Peak inverse voltage
Minimum of three times of the load voltage
Average rectified current: 1 A
Intelligent Flag I/II V600-HA
9














页数 15 页
下载[ V600-HAM91.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
V600-HAM91Intelligent Flag I/IIOmron
Omron
V600-HAM91Intelligent Flag I/IIOmron
Omron
V600-HAM91V600 ID SystemsOmron
Omron
V600-HAM91Intelligent Flag IOmron
Omron

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap