|
|
零件编号 | LM3037A | ||
描述 | LCD Module | ||
制造商 | Shenzhen | ||
LOGO | |||
1 Page
www.DataSheet4U.com
LM3037A
LCD Module User Manual
Shenzhen TOPWAY Technology Co., Ltd.
Rev. Descriptions
0.1 Preliminary New Release
URL: www.topwaydisplay.com
www.topwaysz.com
Release Date
2005-12-29
Document Name: LM3037A-Manual-Rev0.1
Page: 1 of 14
TOPWAY
LCD Module User Manual
LM3037A
5. Function Specifications
5.1 Resetting the LCD module
The LCD module should be initialized by setting /RST terminal at low level when turning the
power on. See the reset timing section for details.
The initialized status is as follow:
Functions
ENTER MODE SET
DISPLAY STATUS
www.DataSheet4U.com FUNCTION SET
SCROLL OR RAM ADDR. SELECT
REVERSE
EXTENDED FUNCTION SET
Initialized Status
I/D=1
cursor move to right
S=0 DDRAM address counter (AC) plus 1
D=0 display = OFF
C=0 cursor = OFF
B=0 cursor position blink = OFF
DL=1
8bit Interface
RE=0
Basic Instruction Set
SR=0
CGRAM address access is enabled
R1=0, R0=0 First line normal
G=0 Graphic Display OFF
5.2 Adjusting the LCD display contrast
A Variable-Resistor must be connected to the LCD module for providing a reference supply to V0.
Adjusting the VR will result the change of LCD display contrast. The recommended value of VR is
5k Ohm.
LCD Module
VOUT
V0
URL: www.topwaydisplay.com
www.topwaysz.com
Document Name: LM3037A-Manual-Rev0.1
Page: 8 of 14
|
|||
页数 | 14 页 | ||
下载 | [ LM3037A.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
LM3037A | LCD Module | Shenzhen |
LM3037BDW | LCD Module | Shenzhen |
LM3037BFW | LCD Module | Shenzhen |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |