DataSheet8.cn


PDF ( 数据手册 , 数据表 ) DN-D9000

零件编号 DN-D9000
描述 Double CD Player
制造商 Denon
LOGO Denon LOGO 


1 Page

No Preview Available !

DN-D9000 数据手册, 描述, 功能
DOUBLE CD PLAYER
DN-D9000
OPERATING INSTRUCTIONS
-TRACK HOT START
RVS
SAMP1
SAMP2 SAMPLER B
FLIP
CLR
A3
A3 A4 CUE
FLIP
CLR
A1
A1 A2
A4
A2
B
B
EXIT/RELOOP
EXIT/
RELOOP
STOP
CUE
EXIT/
RELOOP
4 HOT START
A 3/4
PITCH/VOL
A3 B
A1 B
MEMO
PROG
A4 B
A2 B
TOTAL REMAIN ELAPSED CONT. SINGLE KEY ADJ.
ms
msf
DRAG S.
BRAKE
ECHO
DUMP
RVS
CONT./SINGLE
TIME
MEMO PROGRAM PLATTER MODE
-TRACK PLAY
PARAMETERS
PUSH
ON/OFF
TRACK
OPEN/
CLOSE
A/B TRIM
SPLICE
SCRATCH
SELECT
DIR SOURCE FX
PITCH/KEY
RANGE
PITCH BEND
0%
RELAY TOTAL TIME PRESET RANDOM
ALL OFF
-TRACK HOT START
RVS
SAMP1
SAMP2 SAMPLER B
FLIP
CLR
A3
A3 A4 CUE
FLIP
CLR
A1
A1 A2
A4
A2
B
B
EXIT/RELOOP
EXIT/
RELOOP
STOP
CUE
EXIT/
RELOOP
4 HOT START
PITCH/VOL
A3 B
A1 B
MEMO
PROG
A4 B
A2 B
TOTAL REMAIN ELAPSED CONT. SINGLE KEY ADJ.
ms
msf
DRAG S.
BRAKE
ECHO
DUMP
RVS
CONT./SINGLE
TIME
MEMO PROGRAM PLATTER MODE
-TRACK PLAY
PARAMETERS
PUSH
ON/OFF
TRACK
OPEN/
CLOSE
A/B TRIM
SPLICE
SCRATCH
A 3/4
SELECT
DIR SOURCE FX
PITCH/KEY
RANGE
PITCH BEND
0%
RELAY TOTAL TIME PRESET RANDOM
ALL OFF
CUE
STUTTER
PLAY/PAUSE
TAP
AUTO
BEND
REMOTE CONTROLLER RC-D90
CUE
STUTTER
PLAY/PAUSE
TAP
AUTO
BEND
OPEN/CLOSE
1
OPEN/CLOSE
2
POWER
ON OFF







DN-D9000 pdf, 数据表
ENGLISH
(3) RC-D90 Front panel
CAUTION:
Note that there are many buttons working two
different functions s selected by short time
pushing or long pushing (1second or more). The
mark indicates short time push function and
mark indicates long time push function.
!3 OPEN/CLOSE button
Open or close disc holder with these buttons
while button illuminations light. Note that if
illumination is off, you cannot open disc holder.
(Eject lock function)
!4 PLAY/PAUSE button (13)
This button will start or pause playback.
Push once to start playback, once again to
pause playback, and once more to resume
playback.
!5 CUE/STUTTER button
CUE:
Pushing this button in Play mode will force the
track back to the position which playback
started. While in search mode, it makes new
Cue point.
STUTTER:
In Cue mode, by pushing the CUE button
makes a Stutter sound from the Cue point. This
is called STUTTER PLAY.
!6 CONT/SINGLE, RELAY button
CONT./SINGLE:
Short pushing play ending mode between
CONT (continue: play more tracks) and SINGLE
(stop playing at current track played).
RELAY:
You can turn on and off RELAY PLAY mode. In
RELAY PLAY mode, playback continues to the
other drive if all tracks are played.
!7 TIME, TOTAL TIME button
TIME:
A quick push will display mode changes
between ELAPSED TIME and REMAIN TIME.
TOTAL:
A long push, will display mode changes
between TRACK TIME and DISC TIME.
So, you can select display mode from four
modes, TRACK ELAPSED, TRACK REMAIN,
DISC ELAPSED and DISC REMAIN.
!8 MEMO, PRESET button
MEMO:
The memo mode starts when this button is
pushed once in the Cue mode.
PRESET:
When this button is pushed for more than 1
sec, the PRESET mode starts.
!9 PROGRAM, RANDOM button
PROGRAM:
With a short push in Cue mode, you can make
list of program play and turn on/off Program
play mode using PARAMETERS knob.
RANDOM:
With a long push in Cue mode, Random play
mode can be turned on/off with
PARAMETERS knob.
@0 PLATTER MODE, ALL OFF
button
PLATTER MODE:
When pushing this button, you can select a
Platter Effect type from DRAG S, BRAKE,
ECHO, DUMP and RVS, and can turn each one
on/off individually.
ALL OFF:
When this button is pushed for more than 1
sec, all the Platter Effect settings are
cancelled.
@1 TRACK/PARAMETERS knob
TRACK:
When PARAMETERS LED is off, turn this knob
to select tracks.
By pushing this knob down while turning, the
tracks will change 10 at a time.
PARAMETERS:
When the PARAMETER LED is flashing, turn
this knob to select and change the parameter
for items found in the Effector, Program,
Memo, and Preset data, etc.
Push this knob down during Effect mode to
change the status to on/off.
@2 Jog Wheel
Use this for the Manual Search, Scan, Pitch
Bend and Scratch operations, or to also select
the effect parameter, etc.
@3 SCRATCH, DIR button
SCRATCH:
Push this button quickly to turn Scratch mode
on and off. When Scratch mode is on,
SCRATCH LED is flashing.
DIR:
Push this button for more than 1 sec to select
playback direction of scratch.
8
@4 FX SELECT, FX SOURCE
button
SELECT:
Push this button a short time to select the
effect function from DELAY, FLANGER, XFM.,
FILTER. Sound of selected effector can be
adjusted with PARAMETERS knob and Jog
Wheel.
SOURCE:
If pushed for more than 1 sec, you can select
source for Effector functions.
@5 FX BYPASS, FX ALL OFF
button
BYPASS:
Push this button to bypass Effector
temporarily and BYPASS LED starts flashing.
The Effects are returned by pushing the
BYPASS button once again.
ALL OFF:
When pushed for more than 1 sec, all the
Effects are turned off.
@6 BEND/SCRATCH button
Push this to switch the Jog Wheel mode
between Pitch Bend and Manual Search.
BEND mode:
Either Pitch Bend or Platter Hold function can
be conducted with the Jog Wheel. Pitch Bend
function works when Jog Wheel is turned
slowly, Platter Hold works with Jog Wheel is
turned quickly. In this mode, BEND LED is
flashing.
Manual Search:
Manual Search and Scan can be conducted
with Jog Wheel. While turn Jog Wheel slowly,
Manual Search works and you can move point
by one frame (1/75 second) with sound. If
turned fast, SCAN will work and point moves
long distance with sound. In this mode,
SEARCH LED is flashing.
When playback is started from Manual Search,
Pitch Bend mode is set instead of Manual
Search mode automatically.
When Cue is set while in the Pitch Bend
mode, Manual Search mode is set
automatically.
@7 TAP, AUTO button
TAP:
When you push this button repeatedly, the
Auto mode turns off and starts measuring your
Beats Per Minute (BPM) by tapping.
NOTE: If you select a new track, AUTO BPM
mode turns on automatically.
AUTO:
When pushing the TAP button for 1 second,
activates AUTO BPM mode.
The measured BPM is displayed in the
character section of the display.
@8 Pitch Slider
Use this slider to adjust playing speed.
The playing speed decreases when slide
upwards and increases downwards.
@9 PITCH/KEY, RANGE button
With this button you can select PITCH and
KEY ADJUST mode. Mode changes Pitch on,
Key Adjust on and both off cyclically. PITCH
LED indicates in Pitch mode and KEY ADJUST
indicator lights up in Key Adjust mode.
RANGE:
Push this button for more than 1 sec to select
the pitch range.
#0 PITCH BEND button
#1 PITCH BEND + button
Pushing these buttons will change playing
speed temporary.
While pushing PITCH BEND + button playing
speed increases and speed decreases while
pushing PITCH BEND button.
When release button, playing speed returns to
the previous speed.
#2 FLIP/CLR button
Use this to select operating mode of A1 and
A2 buttons, from Hot Start mode and Stutter
mode. FLIP LED lights up in Hot Start mode.
If the FLIP button is pushed while pushing the
A1 or A2 button, you can clear the selected A
point.
By holding down just the FLIP button for more
than 1 sec, you can clear A1 and A2 points all
at once.
#3 A1 button
#4 A2 button
Using these buttons you can create starting
points for Hot Start, Seamless Loop, Stutter
and Splice playback.
The button illumination changes its color to
inform different modes.
Orange ..Hot Start mode
Green ....Alpha-Track Hot Start mode
Yellow....Splice mode
#5 B button
Use this to set the B point for A1 and A2
seamless loop and splice playback end.
The B LED indicates conditions about B point.
B LED lit:
Already B point was set.
B LED flashing:
In Splice point setting mode







DN-D9000 equivalent, schematic
ENGLISH
10 A/B TRIM
The seamless loop, sampler loop and splice A and B points can be fine-adjusted using Jog Wheel.
There are two ways for doing this.
A-B Trim: Trim the points during loop playback as a rehearsal.
A/B Move: Move the points using the Manual Search. A/B Move can not be used with Sampler loop.
A/B TRIM
e, t, o, !2
y, i, !0, !2 q, !3 w
-TRACK HOT START
RVS
SAMP1
SAMP2 SAMPLER B
FLIP
CLR
A3
A3 A4 CUE
FLIP
CLR
A1
A1 A2
A4
A2
B
B
EXIT/RELOOP
EXIT/
RELOOP
STOP
CUE
EXIT/
RELOOP
4 HOT START
A 3/4
PITCH/VOL
A3 B
A1 B
MEMO
PROG
A4 B
A2 B
TOTAL REMAIN ELAPSED CONT. SINGLE
ms
msf
KEY ADJ.
DRAG S.
BRAKE
ECHO
DUMP
RVS
CONT./SINGLE
TIME
MEMO PROGRAM PLATTER MODE
-TRACK PLAY
PARAMETERS
PUSH
ON/OFF
TRACK
OPEN/
CLOSE
A/B TRIM
SPLICE
SCRATCH
SELECT
DIR SOURCE FX
PITCH/KEY
RANGE
PITCH BEND
0%
RELAY TOTAL TIME PRESET RANDOM
ALL OFF
-TRACK HOT START
RVS
SAMP1
SAMP2 S
FLIP
CLR
A3
A3 A4 CUE
FLIP
CLR
A1
A1 A2
A4
A2
A3 B
A1 B
MEMO
PROG
TOTAL REMAIN ELAPSED CON
m
ms
CONT./SINGLE
TIME
MEMO
RELAY TOTAL TIME PRESET
CUE
STUTTER
PLAY/PAUSE
TAP
AUTO
BEND
r, u, !1
REMOTE CONTROLLER RC-D90
CUE
STUTTER
PLA
Select A-B trim mode
First select whether to adjust the A and B
points using the A-B trim mode or the A/B
move mode.
A/B TRIM
q Push the A/B TRIM button to
1 set the A and B point position SPLICE
adjustment mode.
w Now turn the
PARAMETERS
PARAMETERS knob to
PUSH
select the A-B Trim or the ON/OFF
A/B Move.
TRACK
Select A point (in A-B Trim)
e Select the A-B Trim and push
the corresponding A button
for the loop to be trimmed.
The A button illumination
2 flashes and loop playback
starts.
A1
In the splice trim mode, total 6 seconds
of spliced section (started from 2
seconds before A point to 4 seconds
after the B point) is played.
Trim A point
r Turn the Jog Wheel to
move the A point 1 frame
at a time.
Range for trimming A point is limited as
follows.
A point for Loop:
±30 frames from the original A point.
3 (However, when the A point was
loaded from the standby mode, the A
point cannot be moved backwards.
So, use A/B Move function)
A point for Splice:
Between the beginning of the disc and
5 frames before B point.
A point for Sampler:
Between the original A point and 5
frames before B point.
Save the A point
t Push the A button again to
4 save new A point, and the
unit automatically exit from
the A-B Trim mode.
A1
Select B point (in A-B Trim)
y Select the A-B Trim mode and
to select the B point, push the
B
5 B button after selecting the A
point.
Then push the B button. The B LED
flashes and the B point trim become
enable.
Trim B point
u Turn Jog Wheel to move
the B point 1 frame at a
time.
• Range for trimming B point is limited as
follows.
B point for Loop:
6
Between 5 frames after A point and
disc end.
B point for Splice:
±30 frames from the original B point.
(However, when the B point was loaded
from the standby mode, the B point
cannot be moved backwards. So, use
A/B Move function)
B point for Sampler:
Between 5 frames after A point and
sampler end.
Save the B point
i Push the B button again to
7 save new B point, and the
unit automatically exit from
finish the A-B Trim mode.
B
A/B Move
Select A and B points
o Select or the A/B Move and
push the A button for the A
point you want to move. The
standby mode is set at the A
point and the A button
8 illumination flashes.
!0 To select the B point, push
the B button after selecting
the A point.
A1
B
• The B LED flashes. The
Selected B point is used for the A1 or A2
point that was first selected.
Move A or B points
!1 Turn the Jog Wheel to move
the selected point using the
Manual Search function.
Range for moving A point is limited as
follows.
A point for Loop:
Between the beginning of the disc and
5 frames before B point.
9 A point for Splice:
Between the beginning of the disc and
5 frames before B point
Range for moving B point is limited as
follows.
B point for Loop:
Between 5 frames after A point and
disc end
B point for Splice:
Between 5 frames after A point and
disc end
Save the A or B points
!2 Push the A1/A2 or B button
again. The LED stops flashing
10 and the A1/A2 or B point is
saved, and the unit
automatically exit from the A/B
Move mode.
B
Cancel the A-B Trim or A/B Move
11 !3 Push the A/B TRIM button to A/B TRIM
cancel the mode.
SPLICE
16










页数 26 页
下载[ DN-D9000.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
DN-D9000Double CD PlayerDenon
Denon

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap