DataSheet8.cn


PDF ( 数据手册 , 数据表 ) AN1111C

零件编号 AN1111C
描述 LED
制造商 Stanley Electric
LOGO Stanley Electric LOGO 


1 Page

No Preview Available !

AN1111C 数据手册, 描述, 功能
Features
Package
Product features
www.DataSheet4U.com
AN1111C
Surface Mount IRED/1608 ( h = 0.7 mm) Type
1608 ( h = 0.7 mm) type, Water clear epoxy
Small Size
Outer Dimension 1.6 x 0.8 x 0.7mm ( L x W x H )
Total Output Power : 2mW TYP. (IF=20mA)
No lead package
Peak Wavelength
Half Intensity Angle
Die materials
Rank grouping parameter
Assembly method
950nm
θx = 125 deg., θy = 150 deg.
GaAs
Sorted by radiant intensity per rank taping
Auto pick & place machine (Auto Mounter)
Soldering methods
Reflow soldering, TTW (Through The Wave) soldering and manual soldering
Please refer to Soldering Conditions about soldering.
Taping and reel
ESD
4,000pcs per reel in a 8mm width tape. (Standard)
Reel diameter:φ180mm
2kV (HBM)
Recommended Applications
Car Audio, Electric Household Appliances, OA/FA, PC/Peripheral Equipment, Other General Applications
2004.11.17
Page 1







AN1111C pdf, 数据表
Reflow Soldering Conditions
AN1111C
Surface Mount IRED/1608 ( h = 0.7 mm) Type
www.DataSheet4U.com
1) The above profile temperature gives the maximum temperature of the LED resin surface.
Please set the temperature so as to avoid exceeding this range.
2) Total times of reflow soldering process shall be no more than 2 times.
When the second reflow soldering process is performed, intervals between the first
and second reflow should be short as possible (while allowing some time for the
component to return to normal temperature after the first reflow) in order to prevent the
LED from absorbing moisture.
3) Temperature fluctuation to the LED during the pre-heating process shall be minimized.
TTW (Through The Wave) soldering Conditions
Pre-heating
Solder Bath Temp.
Dipping Time
120 150 (MAX.)
60 s 120 s (MAX.)
260
5s
(MAX.)
(MAX.)
1) The dip soldering process shall be 2 times maximum.
2) The product shall be cooled to normal temperature before the second dipping process.
Manual Soldering Conditions
Iron tip temp.
Soldering time and frequency
280
3s
1 time
(MAX.) (30 W Max.)
(MAX.)
(MAX.)
2004.11.17
Page 8














页数 10 页
下载[ AN1111C.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
AN1111CLEDStanley Electric
Stanley Electric
AN1111RLEDStanley Electric
Stanley Electric

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap