DataSheet8.cn


PDF ( 数据手册 , 数据表 ) GR64

零件编号 GR64
描述 AT Command Manual
制造商 Sony
LOGO Sony LOGO 


1 Page

No Preview Available !

GR64 数据手册, 描述, 功能
wwwwww.Da.DtaSahteaeSt4Uh.ecoemt4U.com
GR64 & GS64
AT Command Manual
The AT Command Manual describes the
AT commands that are supported by the
GR64 and GS64 modules.
Note: Any hard copy of this document is for reference only. Due to template and application dependencies the header and footer may fail to display
correct data. It is the responsibility of the user to ensure that they have a correct and valid version. Any outdated hard copy is invalid and must be
removed from possible use.







GR64 pdf, 数据表
wwwwww.Da.DtaSa1ht6eae.S4t4.Uh1.ecoe*mtE42USD.cRomSIM Detection Unsolicited Response ................................................... 237
16.5
AT+CPIN PIN Control ....................................................................................... 237
16.6
AT*EPEE Pin Event ............................................................................................ 239
16.6.1 *EPEV Pin Event Unsolicited report .................................................................. 239
16.7
AT*E2SSN SIM Serial Number ........................................................................... 239
16.8
AT+CIMI Subscriber Identification.................................................................... 240
17 SIM Application Toolkit ..................................................................................... 241
17.1
AT*ESTKMENU Menu Selection .......................................................................... 241
17.2
AT*ESTKRES Terminal Response........................................................................ 241
17.3
AT*ESTKS SIM Application Toolkit Settings ...................................................... 243
17.4
AT*E2STKTO SIM Application Toolkit Settings.................................................. 244
17.5
SIM Tookkit Unsolicited Result Codes ............................................................... 244
17.5.1 *ESTKCALL Set Up Call ...................................................................................... 244
17.5.2 *ESTKCC Call Control Event From SIM/USIM Application Toolkit ...................... 246
17.5.3 *ESTKCLOSE Close Channel............................................................................... 247
17.5.4 *ESTKDISP Display Text..................................................................................... 247
17.5.5 *ESTKGIN Get Input.......................................................................................... 248
17.5.6 *ESTKKEY Get Inkey .......................................................................................... 249
17.5.7 *ESTKITEM Select Item ...................................................................................... 250
17.5.8 *ESTKOPEN Open Channel ................................................................................ 251
17.5.9 *ESTKRCVD Receive Data .................................................................................. 252
17.5.10 *ESTKRSH Refresh ............................................................................................. 252
17.5.11 *ESTKSMENU Set Up Menu................................................................................. 253
17.5.12 *ESTKSNDD Send Data ...................................................................................... 254
17.5.13 *ESTKSMS Send Short Message ........................................................................ 254
17.5.14 *ESTKSS Send SS .............................................................................................. 255
17.5.15 *ESTKTONE Play Tone ....................................................................................... 256
17.5.16 *ESTKUSSD Send USSD ...................................................................................... 257
18 Supplementary Services .................................................................................... 258
18.1
AT+COLP Connected Line Identification Presentation ....................................... 258
18.2
AT+CACM Accumulated Call Meter ................................................................... 259
18.3
AT+CAOC Advice of Charge.............................................................................. 259
18.3.1 +CCCM Current Call Meter Unsolicited Response ............................................ 260
18.4
AT+CCWE Call Meter Maximum Event .............................................................. 261
18.5
AT+CCFC Call Forwarding number and Conditions........................................... 261
18.6
AT+CCWA Call Waiting ..................................................................................... 263
18.7
AT+CHLD Call Hold and Multiparty................................................................... 265
18.8
AT+CLIP Calling Line Identification ................................................................... 267
18.8.1 +CLIP Calling Line Identification Unsolicited Response .................................... 268
18.9
AT+CLIR Calling Line Identification Restriction ................................................. 269
18.10 AT+CSSN Supplementary Service Notification ................................................... 270
18.10.1 +CSSI Supplementary Services Notification ...................................................... 272
18.10.2 +CSSU Supplementary Services Notification...................................................... 272
18.11 AT+CUSD Unstructured Supplementary Service Data ........................................ 273
13/198 17-LXE 108 566 Uen
8







GR64 equivalent, schematic
wwwwww.Da.DtaSahteaeSt4Uh.ecoe<mt4erUr>.com
317
318
320
321
322
330
331
332
340
500
- 511
512-
Description
SIM PIN2 required
SIM PUK2 required
Memory failure
Invalid memory index
Memory full
SMSC address unknown
No network service
Network time-out
No +CNMA acknowledgment expected
Unknown error
Other values in range 256 - 511 are reserved
Manufacturer specific
1.6 Examples on How to Use the AT Commands
For many of the more complicated commands, examples are provided after the command’s
description. Always refer to the detailed description of the command in question to check
valid parameter values, AT command syntax and Response syntax.
1.7 SMS Text Mode
SMS text mode allows users to send SMSs without having to understand how PDUs are
constructed. This section describes how to carry out basic operations in text mode and
explains the steps that need to be taken.
Basic transmission of SMS
A script which sets the module up is shown below:
Command
AT+CSMP=17,167
OK
AT+CMGF=1
OK
AT+CMGS=“07787154042”
> Test SMS
+CMGS: 204
OK
Description
Set text mode parameter
Switch the module to text mode
Sending an SMS
The text must be ended, as in PDU mode,
with a control-Z character (ASCII 26)
Confirmation that the SMS has been sent
successfully
Note the following points:
Once the CSMP and CMGF commands have been carried out they will not need to be
initialized for this session.
These parameters are saved in NVRAM using the &W command.
13/198 17-LXE 108 566 Uen
16










页数 30 页
下载[ GR64.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
GR64Modem Integrators ManualSony
Sony
GR64AT Command ManualSony
Sony
GR64Wireless CPUWavecom
Wavecom
GR6953Self-oscillating Half-bridge Power ICgrenergy
grenergy

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap