DataSheet8.cn


PDF ( 数据手册 , 数据表 ) Z02205

零件编号 Z02205
描述 MODEM CONTROLLER IDEAL
制造商 Zilog
LOGO Zilog LOGO 


1 Page

No Preview Available !

Z02205 数据手册, 描述, 功能
www.DataSheet4U.com
Z02205
MODEM CONTROLLER IDEAL FOR LOW POWER
CONSUMPTION, SMALL SIZE REQUIREMENTS
PRODUCT SPECIFICATION
PS001000-MOD0599
ZiLOG WORLDWIDE HEADQUARTERS • 910 E. HAMILTON AVENUE • CAMPBELL, CA 95008
TELEPHONE: 408.558.8500 • FAX: 408.558.8300 • INTERNET: HTTP://WWW.ZILOG.COM







Z02205 pdf, 数据表
wwwZ.0D2a2ta0S5heet4U.com
Modem Controller
ZiLOG
VCC TA = 0° C to +70°C
Sym
Parameter
Note [3]
Min
Typical [1]
Max @ 25°C Units
Conditions
Notes
IIR Reset Input
5.5V
–20
–180
–85 µA
Current
ICC Supply Current 5.5V
25 20 mA @ 16 MHz
4
ICC1 Standby Current 5.5V
(HALT Mode)
8 3.7 mA VIN = 0V, VCC
@ 16 MHz
4
ICC2 Standby Current 5.5V
(STOP Mode)
10 4 µA VIN = 0V, VCC WDT is 6,11
not Running
5.5V
800 600 µA VIN = 0V, VCC WDT is 6,11,
Running
13
VICR
Input Common
Mode
5.5V
0 VCC–1.0V
V
10
Voltage Range
IALL Auto Latch Low 5.5V
Current
1.4
15
5 µA 0V < VIN < VCC
9
IALH
Auto Latch High 5.5V
Current
–1.0
–8
–6 µA 0V < VIN < VCC
9
VLV VCC Low
Voltage
Protection
Voltage
2.8
V 4 MHz max Int. CLK
7
Freq.
2.2 3.1 2.8
6 MHz max Int. CLK 7,13
Freq.
VOH Output High
Voltage
5.0V
VCC–0.4
4.8 V IOH = –0.5 mA
(Low EMI
Mode)
VOL Output Low
Voltage
5.0V
0.4 0.1 V IOL = 1.0 mA
(Low EMI
Mode)
Notes:
1. Typicals at VCC = 5.0V.
2. GND = 0V.
3. The VDD voltage specification of 5.5V guarantees 5.0V ±0.5V with typicals at VCC–5.0V.
4. All outputs unloaded, I/O pins floating, inputs at rail.
5. CL1 = CL2 = 10 pF.
6. Same as note [4] except inputs at VCC.
7. The VLV voltage increases as the temperature decreases and will overlap lower VCC operating region.
8. Standard Mode (not Low EMI).
9. Auto Latch (Mask Option) selected.
10. For analog comparator, inputs when analog comparators are enabled.
11. Clock must be forced Low, when XTAL1 is clock-driven and XTAL2 is floating.
12. Excludes clock pins.
13. 0°C to 70°C (standard temperature).
6 PS001000-MOD0599







Z02205 equivalent, schematic
wwwZ.0D2a2ta0S5heet4U.com
Modem Controller
Command
&HT
PTT Test Command
I Identification
14
ZiLOG
Table 2. AT Command Set (Continued)
Function and Description
The &HT command causes the modem to transmit tones for PTT testing. The test tone is
generated until a character is typed on the modem’s terminal. The country configuration
may disable this command. The modem returns an ERROR result if this command
is issued.
&HT0-9 DTMF tone for digit n where the command was &HTn.
&HT10 DTMF tone"*"
&HT11 DTMF tone "#"
&HT12 DTMF tone "A"
&HT13
&HT14
&HT15
&HT16
&HT17
DTMF tone "B"
DTMF tone "C"
DTMF tone "D"
V.21 channel 1 mark
V.21 channel 2 marks
&HT18 V.23 1200bps marks
&HT19 V.23 75bps marks
&HT20 V.21 channel 1 spaces
&HT21
&HT22
&HT23
&HT24
&HT25
&HT26
V.21 channel 2 spaces
V.23 1200bps spaces
V.23 75bps spaces
V.22 originate mode
V.22 answer mode
V.22bis originate mode
&HT27 V.22bis answer mode
&HT28 V.25 calling tone
&HT29 550Hz guard tone
&HT30
&HT31
&HT32
&HT33
&HT34
&HT35
1800Hz guard tone
Silence
Detect 2100 Hz answer tone
Detect all supported answer tones simultaneously
Detect dial tone
Detect call progress tones
The I command queries the modem for information that can be used to determine the
modem’s compatibility with other software and to ensure the modem is operating
properly.
I0 Displays product code. The modem reports its product code to the terminal.
The modem produces information text dependent upon its features and
capabilities.
I1 Displays ROM checksum. The modem reports the value of its ROM
checksum. The decimal number displayed is the eight bit sum (from 0 to
255) of all the bytes in ROM.
I2 Tests the ROM checksum. The modem checks its ROM to ensure it is
correct. The modem reports a result code indicating whether the ROM is
OK or in ERROR.
I3 Displays Software Versions. The modem reports the modem controller and
data pump software versions, and the modem controller software release
date, to the terminal.
I4 Displays Modem Identification. The modem reports a configured
identification message to the terminal.
PS001000-MOD0599










页数 30 页
下载[ Z02205.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
Z02201V.22BIS Data PumpZilog
Zilog
Z02205MODEM CONTROLLER IDEALZilog
Zilog

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap