DataSheet8.cn


PDF ( 数据手册 , 数据表 ) NV-FJ606

零件编号 NV-FJ606
描述 (NV-FJ604 - NV-FJ610) Video Recoder
制造商 Panasonic
LOGO Panasonic LOGO 


1 Page

No Preview Available !

NV-FJ606 数据手册, 描述, 功能
www.DataSheet4U.com
Video Cassette Recorder
NV-FJ610 Series
NV-FJ606 Series
NV-FJ604 Series
Operating Instructions
VQT8539
Before attempting to connect, operate or adjust this product,
please read these instructions completely.







NV-FJ606 pdf, 数据表
www.DataSheet4U.com
If you are connecting your VCR to a TV using Method 1,
follow the operations explained below.
Auto Setup Function
The Auto Setup function automatically tunes all available TV
stations and sets the VCRs clock to the current date and
time. If the tuning and time/date settings are not correct,
performing timer recordings is not possible.
01 Switch the TV on.
Hint:
If you select Schweiz, Suisseor Svizzeraon the
Country setting menu, the Functions setting menu appears
automatically to let you set the item Power saveto ON.
In this setting, the VCRs power consumption is minimised
when it is off (Standby mode). To turn the VCR on, keep the
VCR-ON/OFF button 1 pressed on the VCR main unit. It is
not possible to turn it on with the remote control.
02 Select the AV input on your TV.
03 Set the VCR/TV switch N to VCR.
04 Press the VCR-ON/OFF button
1 to switch the VCR on.
The Country setting menu
appears on the TV screen.
05 Press the Cursor buttons
(3421) P to select the
country where you are using
the VCR.
06 Press the OK button R and the
VCRs Auto Setup automatically
starts and tunes all available TV
stations and also sets the clock.
This takes about 5 minutes.
On Screen Display
Country
België
Belgique
Belgien
Danmark
España
France
Italia
Nederland
Norge
VCR
Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
Menu for Country setting
Auto-Setup
Country
Tuning
VCR
: others
: Ch 21
Indication during Auto Setup
07 When the indication shown
on the right appears on the
VCR display, the Auto Setup
is complete.
VCR display
CVC
SP
Indication when Auto Setup
is complete
08 Press the MENU button S
for more than 5 seconds so
that the RF output channel
Indication when the RF output
number appears on the VCR channel is 36 (example)
display.
The initial setting is channel 36.
09 Press the Numeric button 0
2 so that the displayed RF
output channel number
changes to “– –”.
Indication after changing the RF
output channel to “– –”
10 Press the OK button R to conclude the setting.
When the clock setting menu appears after Auto Setup
has finished:
1 Press the Cursor buttons (3421) P to set the correct
time and date.
2 Press the OK button R to conclude the setting.
To Confirm that the TV Stations Have Been
Tuned Correctly by the Auto Setup
Function
1 Press the MENU button S to
display the OSD Main menu
on the TV screen.
On Screen Display
Main menu
VCR
Timer recording
Tuning
Clock setting
Functions
2 Press the Cursor buttons
(34) P to select Tuning
and press the OK button R
then select Manual.
Tuning
Manual
Auto-Setup Restart
Shipping condition
VCR
3 Press the OK button R to
display the list of tuned TV
stations and confirm that all
available TV stations have
been set correctly.
Tuning
Pos Name
1 ARD
2 ZDF
3 N3
4 HR3
5 BR3
6 RB3
7 SFB3
8 SW3
Ch
1
2
19
26
18
3
36
29
VCR
List of tuned TV stations
(example)
4 Press the EXIT button Q to exit the On Screen Display.
When the station names and/or channel numbers have not
been set correctly:
See page 21 for details.
To Cancel the Auto Setup Before It Has Finished
Press the EXIT button Q.
8







NV-FJ606 equivalent, schematic
www.DataSheet4U.com
To Change a Timer Recording
Programming
It is not possible to change a programming while the timer
recording is being performed.
³ Display the VCR picture on the TV.
³ Set the VCR/TV switch N to VCR.
1 Press the PROG./CHECK button < to display the timer
recording programmings on the TV screen.
2 Press the Cursor buttons (34) P to select the
programming that you want to change.
3 Follow the operations below to change the programmed
contents.
To change the broadcasting station:
Use the Channel buttons :.
To change the date of
the timer recording:
Timer recording
VCR
Use the DATE button ;.
To change the recording
starting time:
Use the ON button F.
Pos
Name
ZDF
ARD
N3
ZDF
jjjjj
jjjjj
jjjjj
jjjjj
DATE
27/10
30/10
Su
Su-Sa
jj/jj
jj/jj
jj/jj
jj jj
Start
ON
20:00
19:00
21:00
17:30
jj:jj
jj:jj
jj:jj
jj jj
Stop
OFF
21:30
20:00
23:30
18:00
jj:jj
jj:jj
jj:jj
jj jj
SP
LP
SP
LP
SP
LP
jj
jj
jj
jj
VPS
PDC
ON
ON
ON
ON
jjj
jjj
jjj
jjj
To change the recording ending time:
Use the OFF button E.
To change the recording speed:
Use the SP/LP button D.
4 Press the OK button R to conclude the setting.
5 Press the EXIT button Q to exit the On Screen Display.
To Cancel the Programming of a Timer
Recording
It is not possible to cancel a programming while the timer
recording is being performed.
³ Display the VCR picture on the TV.
³ Set the VCR/TV switch N to VCR.
1 Press the PROG./CHECK
button < to display the timer
Timer recording
VCR
Pos Start Stop SP VPS
recording programmings on the
Name
ZDF
ARD
DATE ON OFF LP
27/10 20:00 21:30 SP
30/10 19:00 20:00 LP
PDC
ON
ON
TV screen.
N3
ZDF
jjjjj
Su
Su-Sa
jj/jj
21:00 23:30
17:30 18:00
jj:jj jj:jj
SP
LP
jj
ON
ON
jjj
jjjjj
jj jj jj jj jj jj jj
jjj
2 Press the Cursor buttons (34) P to select thejjjjj
jjjjj
jj jj
jj jj
jj jj jj jj
jj jj jj jj
jj
jj
jjj
jjj
programming that you want to cancel.
3 Press the CANCEL > button.
Timer recording
VCR
Pos Start Stop SP VPS
Name DATE ON OFF LP PDC
4 Press the EXIT button Q to exit ZDF
ARD
27/10 20:00 21:30 SP ON
30/10 19:00 20:00 LP ON
jjjjj
jj/jj jj:jj jj:jj jj
jjj
the On Screen Display.
ZDF
jjjjj
Su-Sa 17:30 18:00 LP
jj/jj jj:jj jj:jj jj
ON
jjj
jjjjj
jj jj jj jj jj jj jj
jjj
jjjjj
jj jj jj jj jj jj jj
jjj
jjjjj
jj jj jj jj jj jj jj
jjj
Notes for Cancelling the Programming of a Timer
Recording
In some cases, for example as listed below, the
programming of a timer recording remains stored in the
memory until 4 a.m. the next day. However, this is not a
malfunction.
³ When a timer recording was not performed up to the TV
programmes ending time because the remaining tape
time was not sufficient.
³ When you have stopped the timer recording while it was
being performed.
16
To Check the Total Timer Recording
Programming Time
The total time indication for timer
recording programming lets you
jjjjj
jjjjj
jjjjj
jjjjj
jjjjj
jjjjj
jjjjj
jj jj
jj jj
jj/jj
jj/jj
jj/jj
jj/jj
jj/jj
jj jj
jj jj
jj:jj
jj:jj
jj:jj
jj:jj
jj:jj
jj jj
jj jj
jj:jj
jj:jj
jj:jj
jj:jj
jj:jj
Total (SP)
jj jjj
jj jjj
jj jjj
jj jjj
jj jjj
jj jjj
jj jjj
90min
check how many programmes can be
recorded by comparing with the
remaining tape time in the VCR
display.
Indication for a total timer
recording programming time
of 90 minutes
³ The total time is calculated in the SP mode.
³ The total time cannot be calculated when setting Daily/
Weekly timer recording.
To select a Timer-Recorded Programme
from the List and Quickly Locate Its
Beginning for Automatic Playback
(Programme List Search)
This VCR can display a list of the timer-recorded
programmes on the inserted video cassette on the TV screen.
You can then select the desired programme, and the VCR
will quickly locate its beginning and start playback.
Conditions for correct operation of the Programme List
Search function:
³ The video cassette must not have been ejected after the
timer recordings were performed.
³ The tape length of the inserted cassette must be set
correctly.
³ The VCR must not be in the timer recording standby mode.
³ A programme of at least 15 minutes must be recorded on
the tape.
³ If a timer recording was performed onto a recorded video
cassette, the previous recording must have been
completely erased by the new recording.
Preparation
³ Display the VCR picture on the TV.
Operations
1 Press the SEARCH button L to
display the Programme List
menu.
Programme List
Pos Name
2 ZDF
3 ARD
VCR
Date Start
27/10 17:46
28/10 15:00
2 Press the Cursor buttons (34) P to select
the programme that you want to locate and play back.
3 Press the SEARCH button L to start the search
for the beginning of the selected programme.
³ After the desired recorded programme has
been found, playback star ts automatically.
³ If, after playback has started, you want to search
for the beginning of the same or another programme,
press the SEARCH button L.
Playback stops, and the Programme List menu appears.
Repeat the above operations steps 23.
To Cancel the Programme List Search:
Press the EXIT Q button.
Hints:
³ When you press the SEARCH button L in the operation
step 1, the last timer-recorded programme is selected
(highlighted).
³ If you take out the cassette or insert another cassette after
a timer recording has finished, pressing the SEARCH
button L activates the Intro-Jet Scan instead of the
Programme List Search. (Refer to page 17.)
³ If you programme linked timer recordings, Programme List
Search function does not work.










页数 30 页
下载[ NV-FJ606.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
NV-FJ604(NV-FJ604 - NV-FJ610) Video RecoderPanasonic
Panasonic
NV-FJ606(NV-FJ604 - NV-FJ610) Video RecoderPanasonic
Panasonic

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap