DataSheet8.cn


PDF ( 数据手册 , 数据表 ) AZ100LVE210

零件编号 AZ100LVE210
描述 ECL/PECL 1:4 / 1:5 Differential Clock Driver
制造商 Arizona Microtek
LOGO Arizona Microtek LOGO 


1 Page

No Preview Available !

AZ100LVE210 数据手册, 描述, 功能
www.DataSheet4U.com
ARIZONA MICROTEK, INC.
AZ100LVE210
ECL/PECL 1:4, 1:5 Differential Clock Driver
FEATURES
PACKAGE AVAILABILITY
Operating Range of 3.0V to 5.5V
Low Skew
PACKAGE PART NUMBER MARKING NOTES
Guaranteed Skew Spec
Differential Design
VBB Output
75kΩ Internal Input Pulldown Resistors
PLCC 28
AZ100LVE210FN
AZM100LVE210
<Date Code>
1,2
1 Add R2 at end of part number for 13 inch (2.5K parts) Tape & Reel.
2 Date code format: “YY” for year followed by “WW” for week.
Direct Replacement for ON Semiconductor
MC100LVE210 & MC100E210
DESCRIPTION
The AZ100LVE210 is a low skew 1:4, 1:5 fanout buffer designed with clock distribution in mind. The device
features fully differential clock paths to minimize both device and system skew. The AZ100LVE210 offers two
selectable clock inputs allowing redundant or test clocks to be incorporated into the system clock trees.
The AZ100LVE210 provides a VBB output for single-ended use or a DC bias reference for AC coupling to the
device. For single–ended input applications, the VBB reference should be connected to one side of the CLKa/CLKb
differential input pair. The input signal is then fed to the other CLKa/CLKb input. The VBB should only be used as a
bias for its sink/source capability is limited. When used, the VBB pin should be bypassed to ground via a 0.01μF
capacitor.
Both sides of the differential output must be terminated into 50Ω to ensure that the tight skew specification is
met, even if only one side is used. In most applications all eight differential pairs will be used and therefore
terminated. In the case where fewer than eight pairs are used, all output pairs on the same package side (sharing the
same VCCO) as the pairs being used should be terminated to maintain minimum skew. Failure to do this will result in
small degradations of propagation delay (on the order of 10–20ps) of the outputs being used; while not being
catastrophic to most designs this will result in an increase in skew.
NOTE: Specifications in the ECL/PECL tables are valid when thermal equilibrium is established.
1630 S. STAPLEY DR., SUITE 127 MESA, ARIZONA 85204 USA (480) 962-5881 FAX (480) 890-2541
www.azmicrotek.com












页数 5 页
下载[ AZ100LVE210.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
AZ100LVE210ECL/PECL 1:4 1:5 Differential Clock Driver
1:5 Differential Clock Driver
AZ100LVE210ECL/PECL 1:4 / 1:5 Differential Clock DriverArizona Microtek
Arizona Microtek

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap