DataSheet8.cn


PDF ( 数据手册 , 数据表 ) V048K015T090

零件编号 V048K015T090
描述 (V048x015T090) Voltage Transformation Module
制造商 Vicor Corporation
LOGO Vicor Corporation LOGO 


1 Page

No Preview Available !

V048K015T090 数据手册, 描述, 功能
www.DataSheet4U.com
VTM
V•I ChipTM – VTM
Voltage Transformation Module
V048K015T090
K indicates BGA configuration. For other
mounting options see Part Numbering below.
• 48 V to 1.5 V V•I Chip Converter
• 90 A (135 A for 1 ms)
• High density – 360 A/in3
• 125°C operation
• 1 µs transient response
• >3.5 million hours MTBF
Vf = 26 - 55 V
VOUT = 0.8 - 1.7 V
IOUT = 90 A
K = 1/32
ROUT = 1.2 mmax
©
• Small footprint – 84 A/in2
• Typical efficiency 93% at 1.5 V/50 A
• Low weight – 0.5 oz (14 g)
• No output filtering required
• Pick & Place / SMD
• BGA or J-Lead packages
Actual size
Product Description
Absolute Maximum Ratings
The V048K015T090 VI Chip Voltage Transformation
Module (VTM) breaks records for speed, density and
Parameter
Values
Unit
Notes
efficiency to meet the demands of advanced DSP,
FPGA, ASIC, processor cores and microprocessor
applications at the point of load (POL) while providing
+In to -In
+In to -In
-1.0 to 60.0
Vdc
100 Vdc For 100 ms
isolation from input to output. It achieves a response
PC to -In
-0.3 to 7.0
Vdc
time of less than 1 µs and delivers up to 90 A in a
TM to -In
-0.3 to 7.0
Vdc
volume of less than 0.25 in3 while providing low output
voltages with unprecedented efficiency. It may be
paralleled to deliver hundreds of amps at an output
voltage settable from 0.8 to 1.7 Vdc.
P R E L I M I N A RYThe VTM V048K015T090’s nominal output voltage is
1.5 Vdc from a 48 Vdc input factorized bus, Vf, and is
controllable from 0.8 to 1.7 Vdc at no load, and from
0.8 to 1.6 Vdc at full load, over a Vf input range of 26
to 55 Vdc. It can be operated either open- or closed-loop
depending on the output regulation needs of the
application. Operating open-loop, the output voltage
tracks its Vf input voltage with a transformation ratio,
K = 1/32, and an output resistance, ROUT = 1.0 milliohm, to
enable applications requiring a programmable low
output voltage at high current and high efficiency.
VC to -In
-0.3 to 19.0
Vdc
+Out to -Out
-0.1 to 4.0
Vdc
Isolation voltage
Operating junction temperature
2,250
-40 to 125
Vdc Input to Output
°C See Note
Output current
90 A Continuous
Peak output current
Case temperature during reflow
135
208
A For 1 ms
°C
Storage temperature
-40 to 150
°C
Output power
Peak output power
145 W Continuous
217 W For 1 ms
Note: The referenced junction is defined as the semiconductor having the highest temperature.
This temperature is monitored by the temperature monitor (TM) signal and by a shutdown comparator.
Closing the loop back to an input Pre-Regulation
Module (PRM) or DC-DC converter can compensate
for ROUT.
Part Numbering
The 1.5 V VTM achieves break-through current density
of 360 A/in3 in a VI Chip package compatible with
standard pick-and-place and surface mount assembly
processes. The VI Chip BGA package supports in-board
mounting with a low profile of 0.16" (4 mm) over the
board. A J-lead package option supports on-board
surface mounting with a profile of only 0.25" (6 mm)
over the board. The VTM’s fast dynamic response and
low noise eliminate the need for bulk capacitance at the
load, substantially increasing the POL density while
improving reliability and decreasing cost.
V 048
Voltage
Transformation
Module
Input Voltage
Designator
K
Configuration Options
A = On-board, elevated (Fig.16)
F = On-board (Fig.15)
K = In-board (Fig.14)
015 T 090
Output Voltage
Designator
(=VOUT x10)
Output Current
Designator
(=IOUT)
Product Grade Temperatures (°C)
Grade Storage Operating
T -40 to150 -40 to125
Vicor Corporation
Tel: 800-735-6200
vicorpower.com
V•I Chip Voltage Transformation Module V048K015T090 Rev. 1.0
Page 1 of 16







V048K015T090 pdf, 数据表
Mechanical Drawings
PRELIMINARY
22,0
0.87
32,0
1.26
TOP VIEW (COMPONENT SIDE)
6,1 9,3
0.24 0.37
(4)
PL.
7,10
0.280
3,01
0.118
(Elevated Option)
24,00
0.945
16,00
0.630
15,55
0.612
8,00
0.315
0,45
0.018
15,99
0.630
3,01
0.118
11,10
0.437
(2) PL.
CL
BOTTOM VIEW
CL 20,00
0.787
16,94
0.667
14,94
0.588
12,94
0.509
NOTES:
1- DIMENSIONS ARE mm/[INCH].
(Elevated Option)
2- UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE:
.X/[.XX] = +/-0.25/[.01]; .XX/[.XXX] = +/-0.13/[.005]
3,5 3- PRODUCT MARKING ON TOP SURFACE
0.14
Figure 12—VTM J-lead mechanical outline; On-board mounting
3,26
0.128
1,38
0.054
TYP
(4)
X
11,48
0.452
(6)
X
1,60
0.063
(2) X
20,00
0.787
(2) X106.6,9647
(2) X104.5,9848
(2)
X
12,94
0.509
15,74
0.620
3,26
0.128
0,51
0.020
TYP
(8)
X
7,48
0.295
(2)
X
24,00
0.945
(2)
X
16,00
0.630
(2)
X
8,00
0.315
RECOMMENDED LAND PATTERN
(COMPONENT SIDE SHOWN)
NOTES:
1- DIMENSIONS ARE mm/[INCH].
2- UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE:
.X/[.XX] = +/-0.25/[.01]; .XX/[.XXX] = +/-0.13/[.005]
Figure 13— VTM J-lead PCB land layout information; On-board mounting
Vicor Corporation
Tel: 800-735-6200
vicorpower.com
V•I Chip Voltage Transformation Module V048K015T090 Rev. 1.0
Page 8 of 16







V048K015T090 equivalent, schematic
Vicor’s comprehensive line of power solutions includes high density AC-DC
and DC-DC modules and accessory components, fully configurable AC-DC
and DC-DC power supplies, and complete custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is
assumed by Vicor for its use. Vicor components are not designed to be used in applications, such as life
support systems, wherein a failure or malfunction could result in injury or death. All sales are subject to
Vicor’s Terms and Conditions of Sale, which are available upon request.
Specifications are subject to change without notice.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (issued U.S. and Foreign Patents and
pending patent applications) relating to the product described in this data sheet including;
• The electrical and thermal utility of the V•I Chip package
• The design of the V•I Chip package
• The Power Conversion Topology utilized in the V•I Chip package
• The Control Architecture utilized in the V•I Chip package
• The Factorized Power Architecture.
Purchase of this product conveys a license to use it. However, no responsibility is assumed
by Vicor for any infringement of patents or other rights of third parties which may result
from its use. Except for its use, no license is granted by implication or otherwise under any
patent or patent rights of Vicor or any of its subsidiaries.
Anybody wishing to use Vicor proprietary technologies must first obtain a license. Potential
users without a license are encouraged to first contact Vicor’s Intellectual Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
Email
Vicor Express: [email protected]
Technical Support: [email protected]
Vicor Corporation
Tel: 800-735-6200
vicorpower.com
V•I Chip Voltage Transformation Module V048K015T090
Rev. 1.0
Page 16 of 16
09/04/10M










页数 16 页
下载[ V048K015T090.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
V048K015T090(V048x015T090) Voltage Transformation ModuleVicor Corporation
Vicor Corporation

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap