DataSheet8.cn


PDF ( 数据手册 , 数据表 ) L36SA12004

零件编号 L36SA12004
描述 DC/DC Power Module
制造商 Delta Electronics
LOGO Delta Electronics LOGO 


1 Page

No Preview Available !

L36SA12004 数据手册, 描述, 功能
Delphi Series L36SA, 2 x 1.6, 50W Family
DC/DC Power Module: 18~75V in, 12V/4A outwww.DataSheet4U.com
The Delphi Series L36SA, 2” x 1.6”, 18~75V input, single output, isolated
DC/DC converter is the latest offering from a world leader in power
systems technology and manufacturing - Delta Electronics, Inc. This
L36SA series provides up to 50 watts of power or 15A of output current
(3.3V) in an industry standard 2” x 1.6” form factor and pinout. The Delphi
L36SA series operates from a wide 18~75V (4:1) input voltages. With
creative design technology and optimization of component placement,
these converters possess outstanding electrical and thermal
performances, as well as extremely high reliability under highly stressful
operating conditions. All models are fully protected from abnormal
input/output voltage, current, and temperature conditions. The Delphi
Series converters meet all safety requirements with basic insulation. An
optional heat spreader is available for extended operation.
FEATURES
High Efficiency: 87.5% @ 12V/4A
Size: 49.6mm x 39.4mm x 8.9mm
(1.95”x1.55”x0.35”)
Industry standard pin out
Fixed frequency operation
Input UVLO, OTP, Output OCP, OVP, (auto
recovery)
Pre-bias start up
2250V isolation and basic insulation
No minimum load required
4:1 Input voltage range
ISO 9001, TL 9000, ISO 14001, QS9000,
OHSAS18001 certified manufacturing
facility
UL/cUL 60950 (US & Canada) Recognized,
and TUV (EN60950) certified.
CE mark meets 73/23/EEC and 93/68/EEC
directives
OPTIONS
Positive On/Off logic
Sense
Heat Spreader
Heatsink
APPLICATIONS
Telecom/Datacom
Wireless Networks
Optical Network Equipment
Server and Data Storage
Industrial/Test Equipment
DATASHEET
DS_L36SA12004_02142007







L36SA12004 pdf, 数据表
DESIGN CONSIDERATIONS
Input Source Impedance
The impedance of the input source connecting to the
DC/DC power modules will interact with the modules and
affect the stability. A low ac-impedance input source is
recommended. If the source inductance is more than a
few µH, we advise adding a 10 to 100 µF electrolytic
capacitor (ESR < 0.7 at 100 kHz) mounted close to the
input of the module to improve the stability.
Layout and EMC Considerations
Delta’s DC/DC power modules are designed to operate
in a wide variety of systems and applications. For design
assistance with EMC compliance and related PWB
layout issues, please contact Delta’s technical support
team. An external input filter module is available for
easier EMC compliance design. Application notes to
assist designers in addressing these issues are pending
to release.
Safety Considerations
The power module must be installed in compliance with
the spacing and separation requirements of the
end-user’s safety agency standard, i.e., UL60950,
CAN/CSA-C22.2 No. 60950-00 and EN60950: 2000 and
IEC60950-1999, if the system in which the power module
is to be used must meet safety agency requirements.
Basic insulation based on 75 Vdc input is provided
between the input and output of the module for the
purpose of applying insulation requirements when the
input to this DC-to-DC converter is identified as TNV-2 or
SELV. An additional evaluation is needed if the source
is other than TNV-2 or SELV.
When the input source is SELV circuit, the power module
meets SELV (safety extra-low voltage) requirements. If
the input source is a hazardous voltage which is greater
than 60 Vdc and less than or equal to 75 Vdc, for the
module’s output to meet SELV requirements, all of the
following must be met:
The input source must be insulated from the ac
mains by reinforced or double insulation.
The input terminals of the module are not
operator accessible.
If the metal baseplate is grounded, one Vi pin
and one Vo pin shall also be grounded.
A SELV reliability test is conducted on the
system where the module is used, in
combination with the module, to ensure that
under a single fault, hazardous voltage does not
appear at the module’s output.
When installed into a Class II equipment (without
grounding), spacing consideration should be given
to the end-use installation, as the spacing between
the module and mounting surface have not been
evaluated.
The power module has extra-low voltage (ELV)
outputs when all inputs are ELV.
This power module is not internally fused. To
achieve optimum safety and system protection, an
input line fuse is highly recommended. The safety
agencies require a normal-blow fuse with 10A
maximum rating to be installed in the ungrounded
lead. A lower rated fuse can be used based on the
maximum inrush transient energy and maximum
input current.
Soldering and Cleaning Considerations
Post solder cleaning is usually the final board
assembly process before the board or system
undergoes electrical testing. Inadequate cleaning
and/or drying may lower the reliability of a power
module and severely affect the finished circuit board
assembly test. Adequate cleaning and/or drying are
especially important for un-encapsulated and/or
open frame type power modules. For assistance on
appropriate soldering and cleaning procedures,
please contact Delta’s technical support team.
DS_L36SA12004_02142007
8














页数 13 页
下载[ L36SA12004.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
L36SA12004DC/DC Power ModuleDelta Electronics
Delta Electronics

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap