|
|
零件编号 | MC74AC573 | ||
描述 | OCTAL D-TYPE LATCH WITH 3-STATE OUTPUTS | ||
制造商 | Motorola Semiconductors | ||
LOGO | |||
1 Page
www.DataSheet4U.com
MC74AC573
MC74ACT573
Octal DĆType Latch
with 3ĆState Outputs
The MC74AC573/74ACT573 is a high-speed octal latch with buffered common
Latch Enable (LE) and buffered common Output Enable (OE) inputs.
The MC74AC573/74ACT573 is functionally identical to the MC74AC373/
74ACT373 but has inputs and outputs on opposite sides.
• Inputs and Outputs on Opposite Sides of Package
Allowing Easy Interface with Microprocessors
• Useful as Input or Output Port for Microprocessors
• Functionally Identical to MC74AC373/74ACT373
• 3-State Outputs for Bus Interfacing
• Outputs Source/Sink 24 mA
• ′ACT573 Has TTL Compatible Inputs
VCC O0 O1 O2 O3 O4 O5 O6 O7 LE
20 19 18 17 16 15 14 13 12 11
1 2 3 4 5 6 7 8 9 10
OE D0 D1 D2 D3 D4 D5 D6 D7 GND
PIN NAMES
D0–D7
LE
OE
O0–O7
Data Inputs
Latch Enable Input
3-State Output Enable Input
3-State Latch Outputs
TRUTH TABLE
Inputs
Outputs
OE LE Dn
L HH
LHL
LLX
HXX
On
H
H
O0
Z
H = HIGH Voltage Level
L = LOW Voltage Level
Z = High Impedance
X = Immaterial
O0 = Previous O0 before LOW-to-HIGH Transition of Clock
OCTAL D-TYPE
LATCH WITH
3-STATE OUTPUTS
N SUFFIX
CASE 738-03
PLASTIC
DW SUFFIX
CASE 751D-04
PLASTIC
LOGIC SYMBOL
D0 D1 D2 D3 D4 D5 D6 D7
LE
OE
O0 O1 O2 O3 O4 O5 O6 O7
DataSheet4 U .com
FACT DATA
5-1
www.DataSheet4U.com
–A–
20
1
–T–
SEATING
PLANE
E
GF
MC74AC573 MC74ACT573
OUTLINE DIMENSIONS
N SUFFIX
PLASTIC DIP PACKAGE
CASE 738–03
ISSUE E
11
B
10
CL
K
N
D 20 PL
0.25 (0.010) M T A M
M
J 20 PL
0.25 (0.010) M
TBM
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
4. DIMENSION B DOES NOT INCLUDE MOLD
FLASH.
INCHES
DIM MIN MAX
A 1.010 1.070
B 0.240 0.260
C 0.150 0.180
D 0.015 0.022
E 0.050 BSC
F 0.050 0.070
G 0.100 BSC
J 0.008 0.015
K 0.110 0.140
L 0.300 BSC
M 0_ 15_
N 0.020 0.040
MILLIMETERS
MIN MAX
25.66 27.17
6.10 6.60
3.81 4.57
0.39 0.55
1.27 BSC
1.27 1.77
2.54 BSC
0.21 0.38
2.80 3.55
7.62 BSC
0_ 15_
0.51 1.01
DW SUFFIX
PLASTIC SOIC PACKAGE
–A–
20
1
20X D
CASE 751D–04
ISSUE E
11
–B– 10X P
0.010 (0.25) M B M
10
J
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.150
(0.006) PER SIDE.
5. DIMENSION D DOES NOT INCLUDE
DAMBAR PROTRUSION. ALLOWABLE
DAMBAR PROTRUSION SHALL BE 0.13
(0.005) TOTAL IN EXCESS OF D
DIMENSION AT MAXIMUM MATERIAL
CONDITION.
MILLIMETERS
INCHES
DIM MIN MAX MIN MAX
0.010 (0.25) M T A S B S
F
A 12.65 12.95 0.499 0.510
B 7.40 7.60 0.292 0.299
C 2.35 2.65 0.093 0.104
D 0.35 0.49 0.014 0.019
R X 45_
F 0.50 0.90 0.020 0.035
G 1.27 BSC
0.050 BSC
J 0.25 0.32 0.010 0.012
18X G
C
–T–
SEATING
PLANE
K
M
K 0.10 0.25 0.004 0.009
M 0 _ 7_ 0_ 7_
P 10.05 10.55 0.395 0.415
R 0.25 0.75 0.010 0.029
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
How to reach us:
USA/EUROPE: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315
MFAX: [email protected] –TOUCHTONE (602) 244–6609
INTERNET: http://Design–NET.com
HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
DataSheet4 U .com
*MC74AC573/D*◊ FACT DATA
5-8
MC74AC573/D
|
|||
页数 | 8 页 | ||
下载 | [ MC74AC573.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
MC74AC57 | (MC74AC57 / MC74AC574) OCTAL D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS | Motorola Semiconductors |
MC74AC573 | Octal Buffer/Line Driver | ON Semiconductor |
MC74AC573 | OCTAL D-TYPE LATCH WITH 3-STATE OUTPUTS | Motorola Semiconductors |
MC74AC574 | Octal D Flip-Flop with 3-State Outputs | ON Semiconductor |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |