DataSheet8.cn


PDF ( 数据手册 , 数据表 ) NV-GS37EB

零件编号 NV-GS37EB
描述 (NV-GS27EB / NV-GS37EB) Digital Video Camera
制造商 Panasonic
LOGO Panasonic LOGO 


1 Page

No Preview Available !

NV-GS37EB 数据手册, 描述, 功能
www.DataSheet4U.com
Operating Instructions
Digital Video Camera
Model No. NV-GS37EB
NV-GS27EB
DV IN
Video Light
NV-GS37EB
¥
NV-GS27EB
www.DataSheet4U.com
Before use, please read these instructions completely.
LSQT1006 A







NV-GS37EB pdf, 数据表
www.DataSheet4U.com
Power supply
Before using
ª Connecting to the AC outlet
ª Charging the battery
When this product is purchased, the battery is not
charged. Charge the battery before using this
product.
Battery charging time (-9-)
We recommend using Panasonic batteries.
If you use other batteries, we cannot guarantee
the quality of this product.
If the DC input lead is connected to the AC
adaptor, then the battery will not get charged.
Remove the DC input lead from the AC adaptor.
1 Connect the AC mains lead to the AC
adaptor and the AC mains socket.
2 Put the battery on the battery mount by
aligning the mark, and then securely plug it
in.
ª Charging lamp
Lights up: Charging
Goes off: Charging completed
Flashing: The battery is over discharged
(discharged excessively). In a while,
the lamp will light up and normal
charging will start.
When the battery temperature is
excessively high or low, the
[CHARGE] lamp flashes and the
charging time will be longer than
normal.
1
1 Connect the AC mains lead to the AC
adaptor and the AC mains socket.
2 Connect the DC input lead to the AC
adaptor.
3 Connect the DC input lead to this product.
The output plug of the AC mains lead is not
completely connected to the AC adaptor
socket. As shown in 1, there is a gap.
Do not use the power cord for other
equipment since the power cord is exclusively
designed for the movie camera. Or do not use
the power cord of other equipment for the
movie camera.
ª Fitting the battery
Push the battery against the battery holder and
slide it until it clicks.
ª Removing the battery
While sliding the [BATTERY RELEASE] lever,
slide the battery to remove it.
www.DataSheet4U.com
BATTERY
RELEASE
Hold the battery with your hand so it does not
fall.
Before removing the battery, be sure to set the
[OFF/ON] switch to [OFF].
8
LSQT1006







NV-GS37EB equivalent, schematic
www.DataSheet4U.com
Before using
Switching the language
You can switch the language on the screen
display or the menu screen.
1 Set [LANGUAGE] >> select the desired
language.
5 Move the joystick right or press it to set the
selection.
6 Move the joystick up or down in order to
select the item to be set.
Using the menu screen
For each individual menu, please refer to -37-.
1 Press the [MENU] button.
MENU
7 Press the joystick to determine the setting.
The menu corresponding to the mode
selected by the mode dial is displayed.
Do not switch the mode dial when the menu is
displayed.
2 Move the joystick up or down in order to
select the top menu.
ª To exit the menu screen
Press the [MENU] button.
ª To get back to the previous screen
Move the joystick left.
3 Move the joystick right or press it to set the
selection.
ª About the menu setting
The menu is not displayed while recording on a
tape. Also, you cannot record on a tape while
the menu is displayed.
4 Move the joystick up or down in order to
select the sub-menu.
www.DataSheet4U.com
16
LSQT1006










页数 30 页
下载[ NV-GS37EB.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
NV-GS37EB(NV-GS27EB / NV-GS37EB) Digital Video CameraPanasonic
Panasonic

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap