|
|
零件编号 | LQ065T9BR51 | ||
描述 | COLOR TFT LCD MODULE | ||
制造商 | Sharp Electrionic Components | ||
LOGO | |||
1 Page
LQ065T9BR51
Color TFT LCD Module
(Model Number: LQ065T9BR51)
Specifications
Spec No.: LCY-00065
Dated: May 31. 2002
LCY00131-6
Table 3 Display Method and Characteristics
MODS MODW MODN Display
Characteristics
Source example
mode
H H H Full The picture is displayed with uniform 4:3 signal, Fig.3-1
mode enlargement in the horizontal direction, and Navigation
the horizontal retrace line of the input signal signal
cannot be seen. If the video sampling
frequency of the image is fixed and a 4:3
video signal is displayed, the picture will be
prominently oblong.
H H L Wide 1 A 4:3 video signal is displayed with less 4:3 signal Fig.3-2
mode feeling of incongruity than that in the full
screen mode. Since the video horizontal
sampling frequency is modulated in the
horizontal direction, the degree of perfect
roundness in the center of the screen is
improved over that of the full screen mode.
H L H Normal When displaying a 4:3 video signal, the 4:3 signal Fig.3-3
mode displayed image is slightly less than
perfectly round and the horizontal retrace
line period is displayed at the two edges of
the screen. With respect to the video
horizontal sampling frequency, the center
portion of the screen is slightly lower and the
two edges become slightly higher. With
respect to the horizontal retrace line period,
a far better display is achieved than that of
masking of the video signal by the VCS
signal timing.
H L L Cinema A letter-box type image (16:9 signal) is letter box Fig.3-4
mode
displayed over the central width of the type wide
screen. In the horizontal
screen display is utilized.
direction,
Due to
full
the
signal(16:
9signal)
display being extended in the vertical
direction, a slightly less than perfectly round
image is displayed.
L H H Wide 2 In the horizontal direction, the Wide 1 4:3 signal Fig.3-5
mode display mode is employed. Due to the
display being extended in the vertical
direction, the portion of the picture in the
center of the screen is slightly less than
perfectly round. Also due to extending in the
vertical direction, the upper and lower
potions of the image are not displayed.
L H L test This mode is unusable as it is the test mode. -
-
L L H test This mode is unusable as it is the test mode. -
-
L L L test This mode is unusable as it is the test mode. -
-
7-6) Display time range
(1) NTSC(M) mode (NTP='Hi',CLKC='Hi')
(a1) Horizontal Direction (full,wide1,2,cinema)
13.1 ~ 63.2 μs from the falling edge of HSY.
(a2) Horizontal Direction (normal)
7.9 ~ 68.4 μs from the falling edge of HSY
(b1) Vertical Direction (full,wide1,normal)
1) VMSW=”Hi” : 19 ~ 258 H from the falling edge of VSY
2) VMSW=”Lo” : 20 ~ 253 H from the falling edge of VSY
(b2) Vertical Direction (Cinema)
1) VMSW=”Hi” : 48 ~ 228 H from the falling edge of VSY
2) VMSW=”Lo” : 49 ~ 224 H from the falling edge of VSY
(b3) Vertical Direction (Wide2)
1) VMSW=”Hi” : 41 ~ 232 H from the falling edge of VSY
2) VMSW=”Lo” : 42 ~ 228 H from the falling edge of VSY
LCY00131-14
(2)PAL(B・G) mode (NTP='Lo',CLKC='Hi')
(a1) Horizontal Direction (full,wide1,2,cinema)
13.1 ~ 63.2 μs from the falling edge of HSY
(a2) Horizontal Direction (normal)
7.9 ~ 68.4 μs from the falling edge of HSY. (Normal)
(b1) Vertical Direction (full,wide1,normal)
1) VMSW=”Hi” : 25 ~ 304 H from the falling edge of VSY
2) VMSW=”Lo” : 26 ~ 298 H from the falling edge of VSY
However, the video signals of (14n+12)H,(14n+20)H/Even field.
(14n+17)H,(14n+23)H/Odd field (n=1,2・・・, 20)
are not displayed on the module.
(b2) Vertical Direction (cinema)
1) VMSW=”Hi” : 48 ~ 287 H from the falling edge of VSY
2) VMSW=”Lo” : 49 ~ 282 H from the falling edge of VSY
(b3) Vertical Direction (wide2)
1) VMSW=”Hi” : 34 ~ 297 H from the falling edge of VSY
2) VMSW=”Lo” : 35 ~ 291 H from the falling edge of VSY
However, the video signals of (22n+14)H,(22n+21)H/Even field.
(22n+25)H,(22n+32)H/Odd field (n=1,2・・・, 12)
are not displayed on the module.
(3) External clock mode (NTP='Hi',CLKC='Lo')
Displaying the following range within video signals.
(a) Horizontal Direction : 86 ~ 485 clk from the falling edge of HSY.
(clk means input external clock.)
(b) Vertical Direction : 19 ~ 258H from the falling edge of VSY.
|
|||
页数 | 30 页 | ||
下载 | [ LQ065T9BR51.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
LQ065T9BR51 | COLOR TFT LCD MODULE | Sharp Electrionic Components |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |