|
|
零件编号 | PT-L711XU | ||
描述 | Quick Start Reference Sheet | ||
制造商 | Panasonic | ||
LOGO | |||
1 Page
Quick Start Reference Sheet
Panasonic PT-L711XU
Revision A
NOTE: This one-page document is intended only as a quick reference for installation – please read the
SP Controls Application Note for a complete description of this projector driver prior to installation.
I. Driver Features
1. Input Selection Mapping
Selection 1: VIDEO
Selection 2: S-VIDEO
Selection 3: RGB 1
Selection 4: RGB 2
2. Hidden Function Mapping (Default Configuration)
mUsing the ON button as a shift key, press the following buttons to access the specified projector features.
Selection 1: MUTE
oSelection 2: ENTER
Selection 3: ADJUST LEFT
.cSelection 4: ADJUST RIGHT
Off: MENU
Volume Up: ADJUST UP
UVolume Down: ADJUST DOWN
t43. Other Driver Features
Power Status Feedback Method RS-232 Power Polling
eControl Wiring: RS-232 and IR-Emitter
eII. Wiring Specifications
hNOTE: For a wiring diagram, please see the SP Controls Application Note following this document.
S1. RS-232:
Wire the Panel RS-232 port to a male DB9 as follows:
taRX to 2
TX to 3
aGND to 5
Connect this male DB9 to the projector port labeled SERIAL.
.D2. Infrared Emitter:
Wire the Panel IR/Serial port to a female 1/8" Mini as follows:
wIR/SER to tip
GND to ring
wConnect to the included IR Emitter and attach the emitter bud to any projector IR window.
w www.DataSheet4U.comDR-PAN05 1/02/02
SP Controls reserves the right to modify specifications without notice at any time.
|
|||
页数 | 5 页 | ||
下载 | [ PT-L711XU.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
PT-L711XU | Quick Start Reference Sheet | Panasonic |
PT-L711XU | (PT-L501XU - PT-L711XU) LCD Projector | Panasonic |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |