|
|
零件编号 | IL2418 | ||
描述 | Two-Tone Telephone Ringer | ||
制造商 | IK Semiconductor | ||
LOGO | |||
1 Page
TECHNICAL DATA
Telephone Tone Ringer with
Bridge Diode
IL2418
The IL2418 is a monolithic integrated circuit telephone tone ringer with
bridge diode, when coupled with an appropriate transducer, it replaces
the electro-mechanical bell. The device is designed for use with either a
piezo transducer or an inexpensive transformer coupled speaker to
produce a pleasing tone composed of a high frequency (fR) alternating
with a low frequency (fL) resulting in a warble frequency. The supply
voltage is obtained from the AC ring signal and the circuit is designed so
that noise on the line or variation of the ringing signal can not affect
correct operation of the device.
• On chip high voltage full wave diode bridge rectifier
• Low current consumption, in order to allow the parallel operation of
the 4 devices
• Low external component count
• Tone and switching frequencies adjustable by external components
• High noise immunity due to built-in voltage-current hysteresis
• Activation voltage adjustable
ORDERING INFORMATION
IL2418N Plastic DIP
IL2418D
SOIC
TA = -40° to 70° C
for package
• Internal zener diodes to protect against over voltages
• Ringer impedance adjustable with external components
www.DataSheet4UPIN .AScSIoGNMmENT
BLOCK DIAGRAM
1
|
|||
页数 | 4 页 | ||
下载 | [ IL2418.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
IL2410 | Two-Tone Telephone Ringer | IK Semiconductor |
IL2411 | Tow-Tone Telephone Ringer | IK Semiconductor |
IL2418 | Telephone Tone Ringer with Bridge Diode | ETC |
IL2418 | Two-Tone Telephone Ringer | IK Semiconductor |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |