DataSheet8.cn


PDF ( 数据手册 , 数据表 ) RI-60

零件编号 RI-60
描述 Ultra-miniature dry-reed switch germetically sealed in a gas-dilled glass envelope
制造商 ETC
LOGO ETC LOGO 


1 Page

No Preview Available !

RI-60 数据手册, 描述, 功能
RI-60 Series
RI-60 SERIES
Ultra-miniature dry-reed switch hermetically sealed in a gas-filled
glass envelope. Single-pole, single-throw (SPST) type, having
normally open contacts, and containing two magnetically actuated
reeds.
The switch is of the double-ended type and may be actuated by an
electromagnet, a permanent magnet or a combination of both.
The device is intended for use in relays, sensors, pulse counters or
similar devices.
RI-60 SERIES FEATURES
u Ideal for ATE switching
u Contact layers: Gold, sputtered ruthenium
u Superior glass-to-metal seal and blade alignment
u Excellent life expectancy and reliability
Dimensions in inches (mm)
GENERAL DATA FOR ALL MODELS RI-60
No-load conditions (operating frequency: 100 Hz)
AT-Customization / Preformed Leads
Besides the standard models, customized products can
also be supplied offering the following options:
! Operate and release ranges to customer specification
! Cropped and/or preformed leads
COILS
All characteristics are measured using the Philips stan-
dard coil. For definitions of the Philips Standard Coil and
the standard MIL Coil, refer to “Application Notes” in
the Reed Switch Technical & Application Information
Section of this catalog.
Life expectancy: min.109 operations with a failure rate of
less than 2 x10-10 with a confidence level of 90%.
End of life criteria:
Contact resistance > 1after 2 ms
Release time > 2ms (latching or contact sticking).
Loaded conditions (resistive load: 5 V; 100 mA;
operating frequency: 125 Hz)
Life expectancy: min. 2 x 107operations with a failure
rate of less than 10-8 with a confidence level of 90%.
Relationship between Philips Standard Coil and the
Standard MIL Coil
Operate value of standard MIL Coil = 0.83 x operate
value of Philips Sandard Coil + 0.30 AT.
Release value of standard MIL Coil = 0.83 x release
value of Philips Standard Coil + 0.18 AT.
End of life criteria:
Contact resistance > 1after 2.5 ms
Release time > 1 ms (latching or contact sticking).
Loaded conditions (resistive load: 20 V; 500 mA;
operating frequency: 125 Hz)
LIFE EXPECTANCY AND RELIABILITY
The life expectancy data given below are valid for a coil
energized at 1.25 times the published maximum operate
value for each type in the RI-60 series.
Life expectancy: min. 2 x 107 operations with a failure
rate of < 10-8 with a confidence level of 90%.
54 Catch Us on the Web! www.cotorelay.com E-Mail us: [email protected]












页数 2 页
下载[ RI-60.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
RI-60Ultra-miniature dry-reed switch germetically sealed in a gas-dilled glass envelopeETC
ETC

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap