|
|
零件编号 | FR-A530 | ||
描述 | Radio Receive | ||
制造商 | Aiwa | ||
LOGO | |||
1 Page
d
OPERATING INSTRUCTIONS
INSTRUCCIONES DE MANEJO
MODE D’EMPLOI
FR-A530 U
RADIO RECEIVER
RECEPTOR DE RADIO
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
OWNER’S RECORD
For your convenience, record the model number (you will find it
at the bottom of the unit) and serial number (you will find it in the
battery compartment) in the space provided below. Please refer
to them when you contact your AIWA dealer in case of difficulty.
Model No.
Serial No.
A
8
6F22
BACKUP FUNCTION
English
If the AC power supply is interrupted, the clock display goes
off and the alarm setting is canceled. To back up the clock and
alarm, insert a 6F22 battery in the battery compartment on the
rear of the unit. → A
• The backup battery is not for radio reception.
Note
The backup function lasts about 10 minutes. Set the clock
again if 10 minutes passed after a power interruption.
Replacing the battery
Replace the battery with a new one if the clock display flashes
or the alarm timer does not work properly when you connect
the AC power cord again.
Note on battery
• When you are not going to use the unit for a long period of
time, remove the battery to prevent possible electrolyte
leakage.
• To prevent the risk of electrolyte leakage or explosions,
never recharge the battery, apply heat to it, or take it apart.
A
2
ALARM 1
ALARM 2
3
PM
ALARM SETTING
English
To check the alarm time
Set ALARM MODE to 1 or 2 and press ALARM SET. The
alarm time will be displayed.
To change the alarm time
Set the alarm time again.
Listening to radio while the alarm is set
Turn ALARM/POWER ON to POWER ON. After listening, turn
the switch to ALARM.
To set the alarm timer to sound twice a day → A
1 Set two alarm times ALARM 1 and 2 respectively
referring to steps 1 and 2 on page 14.
2 Turn ALARM/POWER ON to ALARM.
3 Set ALARM MODE to 1 + 2.
The ALARM 1 and ALARM 2 indicators (a) light up in the
display.
Note
• The buzzer tones of ALARM 1 and 2 are different.
• When the alarm times set on ALARM 1 and 2 are the same,
the alarm timer functions once at the preset time.
• You cannot set buzzer and radio alarms at the same time.
16
|
|||
页数 | 22 页 | ||
下载 | [ FR-A530.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
FR-A530 | Radio Receive | Aiwa |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |