DataSheet8.cn


PDF ( 数据手册 , 数据表 ) OXFW911

零件编号 OXFW911
描述 IEEE1394 to ATA/ATAPI Native Bridge
制造商 ETC
LOGO ETC LOGO 


1 Page

No Preview Available !

OXFW911 数据手册, 描述, 功能
FEATURES
S400 (50 Mbytes/s) compliant 1394-1995 Link and
Transaction layers
Compatible with 1394-1995 and 1394A Phys.
Microsoft Win98-Second Edition, Win2000 and Apple
MacOS generic driver support
SBP-2 Target Revision 4 compliant interface
Fully ATA-5 compliant (see T13-1321D)
Support for UDMA5 (ATA100)
Sustained data transfer of 35 MB/s
Supports PIO modes 0 to 4, DMA modes 0 to 2 and
Ultra DMA modes 0 to 5
ORB co-processor to accelerate translation of ORBs
to ATAPI commands
Supports ORB chaining for increased performance
DESCRIPTION
The OXFW911 is a high-performance 1394 to
ATA/ATAPI (IDE) native bridge with an integrated target
Serial Bus Protocol (SBP-2 ) controller. By supporting
the SBP-2 protocol, the device can use generic SBP-2
drivers available in the Microsoft Windows 98SE, Microsoft
Windows 2000, Microsoft Millennium and Apple MacOS
(8.4 to 9.04) operating systems. MacOS support also
includes booting from Firewire disk.
The device is ideally suited for smart-cable or tailgate
interface applications for removable-media drives, compact
flash card readers, CD-ROM, CD-R, CD-RW, DVD-ROM,
DVD-RAM and hard disk drives, allowing IDE drives to be
connected to a 1394 serial bus in a plug-and-play fashion.
Both ATA and ATAPI devices are supported using the
same firmware.
This highly integrated device offers a two-chip solution to
native bridge applications using an external 1394 PHY. The
device is compatible with both 1394-1995 and 1394A
PHYs.
The LINK controller complies with 1394-1995 and 1394A
specifications. The 1394 transaction layer and SBP-2
protocol is implemented using a combination of the
ARM7TDMI (low-power 32-bit RISC processor), an ORB
(Operational Request Block) hardware co-processor and a
high performance buffer manager.
The buffer manager has a RAM bandwidth of 800Mbps. It
provides storage for 1394 and ATA/ATAPI packets,
OXFW911
IEEE1394 to ATA/ATAPI Native Bridge
Data Sheet
High performance ATA command translation in
firmware using Reduced Block Command (RBC) set
Integrated 32-bit RISC processor (ARM7TDMI) with
on-chip scratch RAM
Optional External Serial ROM interface for
configuration data, user serial number, etc.
Integrated 512kb Flash memory
Blank Flash memory programming feature via 1394
bus
Firmware and Flash Programming Utilities supplied by
Oxford Semiconductor
3.3 Volts operation
Low Power CMOS
Ultra-thin 128-TQFP package (14 x 14 x 1 mm)
automatically storing them and passing them to the
appropriate destinations, without any intervention from the
processor. It also provides storage and manages the
sequencing of ORB fetching to reduce latency and improve
data throughput.
The configuration data including the IEEE OUI
(Organisational Unique Identifier) and device serial number
is stored in the Flash ROM which may be uploaded from
the 1394 bus, even when blank. The device also facilitates
firmware uploads from the 1394 bus.
The ORB co-processor translates ORBs as defined in the
SBP-2 protocol into ATA/ATAPI commands, and
automatically stores error/status messages at an address
specified by the host.
Concurrent operation of the ATA/ATAPI and 1394
interfaces are facilitated using the high throughput buffer
manager where LINK, ATAPI manager and ARM7TDMI
can perform interleaved accesses to the on-chip RAM
buffer. The high performance processor ensures that no
significant latency is incurred. The ATA command
translation is performed in firmware to meet RBC (Reduced
Block Commands) standard, T10-1228D. The ATA/ATAPI
Manager supports PIO modes 0 to 4, DMA modes 0 to 2
and Ultra DMA mode 0 to 5 and provides the interface to
the IDE bus. It is compliant with T13-1321D, ATA-5
specification, as well as support for ATA100.
Oxford Semiconductor Ltd.
25 Milton Park, Abingdon, Oxon, OX14 4SH, UK
Tel: +44 (0)1235 824900 Fax: +44(0)1235 821141
© Oxford Semiconductor 2001
OXFW911 Data Sheet Revision 1.1 – Mar 2001
Part No. OXFW911-TQ-A







OXFW911 pdf, 数据表
OXFORD SEMICONDUCTOR LTD.
OXFW911
6 AC ELECTRICAL CHARACTERISTICS
6.1 IDE interface
Symbol
t0
t1
t2
t2i
t3
t4
t5
t6
t6z
t9
tRD
tA
tB
tA
Parameter
Cycle Time
Address Valid to DIOR# / DIOW#
setup
DIOR# / DIOW# pulse width
DIOR# / DIOW# recovery time
DIOW# data setup (min )
DIOW# data hold
DIOR# data setup ( min )
DIOR# data hold ( min )
DIOR# data tristate (max )
DIOR# / DIOW# to address valid
hold
Read Data Valid to IORDY active if
IORDY initially low after tA
IORDY Setup time
IORDY Pulse Width ( max )
IORDY assertion to release
Mode 0
600
80
320
-
60
40
50
5
30
40
0
35
1250
5
Mode 1
400
80
320
-
45
40
35
5
30
40
0
35
1250
5
Mode 2
360
40
Mode 3
200
40
320 80
- 80
30 30
40 40
20 20
55
30 30
40 40
00
35 35
1250 1250
55
Mode 4
120
40
80
40
20
40
20
5
30
40
0
35
1250
5
Units
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
Table 5: OXFW911 IDE PIO / Register Transfers
Data Sheet Rev 1.1
Page 8







OXFW911 equivalent, schematic
OXFORD SEMICONDUCTOR LTD.
OXFW911
DMARQ
(device)
DMACK(host)
STOP(host)
(DIOW#)
HDMARDY(host)
(DIOR#)
DSTROBE(device)
(IORDY)
ID[15:0]
IA[2:0], ICS#[1:0]
tui
tack
tenv tfs
tzad
tziordy
taz
tack
tdvs tdvh
Figure 5: Initiating an Ultra DMA data-in burst
Data Sheet Rev 1.1
Page 16










页数 30 页
下载[ OXFW911.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
OXFW911IEEE1394 to ATA/ATAPI Native BridgeETC
ETC

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap