|
|
零件编号 | PS11017 | ||
描述 | FLAT-BASE TYPE INSULATED TYPE | ||
制造商 | Powerex Power | ||
LOGO | |||
1 Page
MITMSUITBSIUSBHISSHEIMSIECMOINCDOUNCDTUOCRTO<RAp<pAlipcpalticoantiSopneScpifeicciIfnicteIlnlitgeellnigtePnotwPeorwMeor dMuoled>ule>
Some parametric limits are subject to change.
PS11PS01117017
FLAFTL-BATA-SBEASTEYPTEYPE
INSIUNLSAUTLEADTETDYPTEYPE
PS11017
INTEGRATED FUNCTIONS AND FEATURES
• 3-phase IGBT inverter bridge configured by the latest 3rd.
generation IGBT and diode technologies.
• Circuit for dynamic braking of motor regenerative energy.
• Inverter output current capability IO (Note 1):
Type Name
100% load
150% over load
PS11017
17.0A (rms)
25.5A (rms), 1min
(Note 1) : The inverter output current is assumed to be sinu-
soidal and the peak current value of each of the
above loading cases is defined as : IOP = IO × √2
INTEGRATED DRIVE, PROTECTION AND SYSTEM CONTROL FUNCTIONS:
• For P-Side IGBTs : Drive circuit, High voltage isolated high-speed level shifting, Short-circuit protection (SC),
Bootstrap circuit supply scheme (Single drive-power-supply) and Under voltage protection (UV).
• For N-Side IGBTs : Drive circuit, Short circuit protection (SC), Control-supply Under voltage and Over voltage protection (OV/UV), Sys-
tem Over-temperature protection (OT), Fault output (FO) signaling circuit, and Current-Limit warning signal output
(CL)
• For Brake circuit IGBT : Drive circuit
• Warning and Fault signaling :
FO1 : Short circuit protection for lower-leg IGBTs and Input interlocking against spurious arm shoot-through.
FO2 : N-side control supply abnormality locking (OV/UV)
FO3 : System over-temperature protection (OT).
CL : Warning for inverter current overload condition
• For system feedback control : Analogue signal feedback reproducing actual inverter phase current (3φ).
• Input Interface : 5V CMOS/TTL compatible, Schmitt trigger input, and Arm-Shoot-Through interlock protection.
APPLICATION
Acoustic noise-less 3.7kW/AC200V class 3 phase inverter and other motor control applica-
tions.
PACKAGE OUTLINES
56 ± 0.8
15.5
1
2 ± 0.3
7
6 ± 0.3
(102)
23
0.5
4-φ5
31
12.7 ± 0.3
63.5 ± 0.8
105 ± 0.5
115 ± 1
96
3
36
17.5
2.5
4-R2
4-φ4.5
MOUNTING
HOLE
20.4 ± 1
4-R5
4-φ3.2
3
17 ± 0.8
Terminals Assignment:
1 CBU+
2 CBU–
3 CBV+
4 CBV–
5 CBW+
6 CBW–
7 GND
8 NC
9 VDH
10 CL
11 FO1
12 FO2
13 FO3
14 CU
15 CV
16 CW
17 UP
18 VP
19 WP
20 UN
21 VN
22 WN
23 Br
31 P
32 Br
33 N
34 U
35 V
36 W
(Fig. 1)
LABEL
May 2001
|
|||
页数 | 6 页 | ||
下载 | [ PS11017.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
PS11011 | FLAT-BASE TYPE INSULATED TYPE | Powerex Power |
PS11012 | FLAT-BASE TYPE INSULATED TYPE | Powerex Power |
PS11013 | FLAT-BASE TYPE INSULATED TYPE | Powerex Power |
PS11014 | FLAT-BASE TYPE INSULATED TYPE | Powerex Power |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |