DataSheet8.cn


PDF ( 数据手册 , 数据表 ) MC7808C

零件编号 MC7808C
描述 THREE TERMINAL POSITIVE FIXED VOLTAGE REGULATORS
制造商 Motorola Semiconductors
LOGO Motorola Semiconductors LOGO 


1 Page

No Preview Available !

MC7808C 数据手册, 描述, 功能
Order this document by MC7800/D
Three-Terminal Positive
Voltage Regulators
These voltage regulators are monolithic integrated circuits designed as
fixed–voltage regulators for a wide variety of applications including local,
on–card regulation. These regulators employ internal current limiting,
thermal shutdown, and safe–area compensation. With adequate heatsinking
they can deliver output currents in excess of 1.0 A. Although designed
primarily as a fixed voltage regulator, these devices can be used with
external components to obtain adjustable voltages and currents.
Output Current in Excess of 1.0 A
No External Components Required
Internal Thermal Overload Protection
Internal Short Circuit Current Limiting
Output Transistor Safe–Area Compensation
Output Voltage Offered in 2% and 4% Tolerance
Available in Surface Mount D2PAK and Standard 3–Lead Transistor
Packages
Previous Commercial Temperature Range has been Extended to a
Junction Temperature Range of –40°C to +125°C
DEVICE TYPE/NOMINAL OUTPUT VOLTAGE
MC7805AC
LM340AT–5
MC7805C
5.0 V
MC7812C
LM340T–12
MC7815AC
12 V
LM340T–5
MC7806AC
MC7806C
6.0 V
LM340AT–15
MC7815C
LM340T–15
15 V
MC7808AC
MC7808C
8.0 V
MC7818AC
MC7818C
18 V
MC7809C
MC7812AC
LM340AT–12
9.0 V
12 V
MC7824AC
MC7824C
24 V
MC7800,
MC7800A, LM340,
LM340A Series
THREE–TERMINAL
POSITIVE FIXED
VOLTAGE REGULATORS
SEMICONDUCTOR
TECHNICAL DATA
T SUFFIX
PLASTIC PACKAGE
CASE 221A
Heatsink surface
connected to Pin 2.
1
2
3
Pin 1. Input
2. Ground
3. Output
D2T SUFFIX
PLASTIC PACKAGE
CASE 936
(D2PAK)
12
3
Heatsink surface (shown as terminal 4 in
case outline drawing) is connected to Pin 2.
STANDARD APPLICATION
Input
Cin*
0.33 µF
MC78XX
Output
CO**
ORDERING INFORMATION
Device
Output Voltage
Operating
Tolerance
Temperature Range
Package
MC78XXACT
LM340AT–XX
2%
Insertion Mount
MC78XXACD2T
Surface Mount
MC78XXCT
TJ = –40° to +125°C
Insertion Mount
LM340T–XX
4%
MC78XXCD2T
Surface Mount
XX indicates nominal voltage.
MOTOROLA ANALOG IC DEVICE DATA
A common ground is required between the
input and the output voltages. The input voltage
must remain typically 2.0 V above the output
voltage even during the low point on the input
ripple voltage.
XX, These two digits of the type number
indicate nominal voltage.
* Cin is required if regulator is located an
appreciable distance from power supply
filter.
** CO is not needed for stability; however,
it does improve transient response. Values
of less than 0.1 µF could cause instability.
© Motorola, Inc. 1997
Rev 5
1







MC7808C pdf, 数据表
MC7800, MC7800A, LM340, LM340A Series
ELECTRICAL CHARACTERISTICS (continued) (Vin = 19 V, IO = 500 mA, TJ = Tlow to Thigh [Note 1], unless otherwise noted.)
MC7812C/LM340T–12
Characteristic
Symbol Min Typ Max Unit
Output Noise Voltage (TA = 25°C)
10 Hz f 100 kHz
Vn – 10 – µV/VO
Output Resistance f = 1.0 kHz
Short Circuit Current Limit (TA = 25°C)
Vin = 35 Vdc
Peak Output Current (TJ = 25°C)
Average Temperature Coefficient of Output Voltage
rO
ISC
Imax
TCVO
– 1.1 – m
– 0.2 – A
– 2.2 – A
– –0.8 – mV/°C
ELECTRICAL CHARACTERISTICS (Vin = 19 V, IO = 1.0 A, TJ = Tlow to Thigh [Note 1], unless otherwise noted.)
MC7812AC/LM340AT–12
Characteristic
Symbol Min Typ Max Unit
Output Voltage (TJ = 25°C)
VO 11.75 12 12.25
Output Voltage (5.0 mA IO 1.0 A, PD 15 W)
14.8 Vdc Vin 27 Vdc
Line Regulation (Note 2)
14.8 Vdc Vin 30 Vdc, IO = 500 mA
16 Vdc Vin 22 Vdc, IO = 1.0 A
14.5 Vdc Vin 27 Vdc, TJ = 25°C
VO 11.5 12 12.5
Regline
– 3.8 18
– 2.2 20
– 6.0 120
Load Regulation (Note 2)
5.0 mA IO 1.5 A, TJ = 25°C
5.0 mA IO 1.0 A
Regload
– 25
– 25
Quiescent Current
IB – 3.4 6.0
Quiescent Current Change
15 Vdc Vin 30 Vdc, IO = 500 mA
14.8 Vdc Vin 27 Vdc, TJ = 25°C
5.0 mA IO 1.0 A, TJ = 25°C
Ripple Rejection
15 Vdc Vin 25 Vdc, f = 120 Hz, IO = 500 mA
Dropout Voltage (IO = 1.0 A, TJ = 25°C)
IB
– – 0.8
– – 0.8
– – 0.5
RR
55 60
VI – VO
2.0
Output Noise Voltage (TA = 25°C)
10 Hz f 100 kHz
Vn – 10 –
Output Resistance (f = 1.0 kHz)
rO – 1.1 –
Short Circuit Current Limit (TA = 25°C)
Vin = 35 Vdc
Peak Output Current (TJ = 25°C)
ISC
Imax
– 0.2 –
– 2.2 –
Average Temperature Coefficient of Output Voltage
TCVO
– –0.8 –
NOTES: 1. Tlow = –40°C for MC78XXAC, C, LM340AT–XX, LM340T–XX Thigh = +125°C for MC78XXAC, C, LM340AT–XX, LM340T–XX
2. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Vdc
Vdc
mV
mV
mA
mA
dB
Vdc
µV/VO
m
A
A
mV/°C
8 MOTOROLA ANALOG IC DEVICE DATA







MC7808C equivalent, schematic
MC7800, MC7800A, LM340, LM340A Series
BF
T
Q
H
Z
4
1 23
A
K
U
L
V
G
N
D
OUTLINE DIMENSIONS
T SUFFIX
PLASTIC PACKAGE
CASE 221A–06
ISSUE Y
–T–
SEATING
PLANE
C
S
R
J
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIM Z DEFINES A ZONE WHERE ALL BODY AND
LEAD IRREGULARITIES ARE ALLOWED.
INCHES
MILLIMETERS
DIM MIN MAX MIN MAX
A 0.570 0.620 14.48 15.75
B 0.380 0.405 9.66 10.28
C 0.160 0.190 4.07 4.82
D 0.025 0.035 0.64 0.88
F 0.142 0.147 3.61 3.73
G 0.095 0.105 2.42 2.66
H 0.110 0.155 2.80 3.93
J 0.018 0.025 0.46 0.64
K 0.500 0.562 12.70 14.27
L 0.045 0.060 1.15 1.52
N 0.190 0.210 4.83 5.33
Q 0.100 0.120 2.54 3.04
R 0.080 0.110 2.04 2.79
S 0.045 0.055 1.15 1.39
T 0.235 0.255 5.97 6.47
U 0.000 0.050 0.00 1.27
V 0.045
– 1.15
Z – 0.080 – 2.04
A
K
B
F
12
3
J
D
0.010 (0.254) M T
G
D2T SUFFIX
PLASTIC PACKAGE
CASE 936–03
(D2PAK)
ISSUE B
–T–
E
TERMINAL 4
U
S
H
V
M
L
P
N
R
C
NOTES:
1 DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2 CONTROLLING DIMENSION: INCH.
3 TAB CONTOUR OPTIONAL WITHIN DIMENSIONS
A AND K.
4 DIMENSIONS U AND V ESTABLISH A MINIMUM
MOUNTING SURFACE FOR TERMINAL 4.
5 DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH OR GATE PROTRUSIONS. MOLD FLASH
AND GATE PROTRUSIONS NOT TO EXCEED
0.025 (0.635) MAXIMUM.
INCHES
MILLIMETERS
DIM MIN MAX MIN MAX
A 0.386 0.403 9.804 10.236
B 0.356 0.368 9.042 9.347
C 0.170 0.180 4.318 4.572
D 0.026 0.036 0.660 0.914
E 0.045 0.055 1.143 1.397
F 0.051 REF
1.295 REF
G 0.100 BSC
2.540 BSC
H 0.539 0.579 13.691 14.707
J 0.125 MAX
3.175 MAX
K 0.050 REF
1.270 REF
L 0.000 0.010 0.000 0.254
M 0.088 0.102 2.235 2.591
N 0.018 0.026 0.457 0.660
P 0.058 0.078 1.473 1.981
R 5_ REF
5_ REF
S 0.116 REF
2.946 REF
U 0.200 MIN
5.080 MIN
V 0.250 MIN
6.350 MIN
How to reach us:
USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;
P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447
Mfax is a trademark of Motorola, Inc.
JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1,
Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488
Customer Focus Center: 1–800–521–6274
Mfax: [email protected] – TOUCHTONE 1–602–244–6609
Motorola Fax Back System
– US & Canada ONLY 1–800–774–1848
– http://sps.motorola.com/mfax/
HOME PAGE: http://motorola.com/sps/
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
16
MOTOROLA ANALOG IC DEVICMECD7A80T0A/D










页数 16 页
下载[ MC7808C.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
MC78083-Terminal 1A Positive Voltage RegulatorFairchild Semiconductor
Fairchild Semiconductor
MC7808A3-Terminal 1A Positive Voltage RegulatorFairchild Semiconductor
Fairchild Semiconductor
MC7808ACTHREE TERMINAL POSITIVE FIXED VOLTAGE REGULATORSMotorola Semiconductors
Motorola Semiconductors
MC7808AE3-Terminal 1A Positive Voltage RegulatorFairchild Semiconductor
Fairchild Semiconductor

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap