|
|
零件编号 | IC11S-68PL-1.27SF-EJR | ||
描述 | Single Slot SMT Connectors For Card-Bus Based PC Cards | ||
制造商 | Hirose | ||
LOGO | |||
1 Page
Single Slot SMT Connectors For Card-Bus Based PC Cards
IC11S Series
PC Card Standard Compliant
Reduced height : 5.6mm high
sFeatures
1. PC Card Standard compliant:
• Grounding is required to meet the high speed signal
requrements of the PC card standard. Grounding reliability is
achieved with a grounding plate and 8 grounding contacts.
• Type 1, type 2 and type 3 cards are covered.
• Terminals for ground clipping are provided.
2. Space saving
Smaller size reduces occupied area on PC boards as
compared to previous products.
3. Reduced Height:
Connector height is minimized to 5.6mm, making possible
thinner product designs.
4. Eject mechanism with high-level functionality
Hirose Electric's original ejection mechanism provides an
higher degree of card ejection over existing products. This
improves the operational qualities of card removal. (Patents
pending)
5. Wide Variety of Options Available
• Standard type mounts to the top of the PC board and reverse
type mounts on the underside of the board
• Three types of eject buttons; rigid, flexible and POP-UP.All
types can be installed on the right or left side of the ejector.
• Available with standoff to utilize space under the connector for
mounting other parts.
6. Light-weight
Weight of 12.7g for normal button type helps achieve the
reduced weight required in today’s products.
Wide variety of options
(1)Board Mounting
➀Standard type
➁Reverse type
(2)Types of eject button
➀Rigid button
➁Foldering button
➂Pop-up button
(3)Position of eject buttons
➀Right
➁Left
(4)Standoffs
➀None
➁2.2mm
A2
sStandard
Right POP-UP button type
SMT unit ( 1 )
No.1
GND
34.4 MAX
3 59
42.545
P= 0.635
No.35
No.2
No.36
No.68
No.34
GND
eject metal fittings movable range
C
A
3 59.5
guide unit ( 2 )
3 54.9
(35.1)
5
No.1
No.2
No.34
No.35
No.36
No.68
Standoff
type
➀SMT unit
Part Number
CL No.
➁Guide unit
Part Number
CL No.
none IC11S-68PL-1.27SF-EJR 640-1007-3
IC11S-BD-PEJR
640-1081-6
2.2mm IC11SA-68PL-1.27SF-EJR 640-1009-9
IC11SA-BD-PEJR
640-1083-1
Note.1) This figure illustrates grouping of SMT unit(➀) and guide unit(➁) together.
Note.2) Dimensions for card fitting are in accordance with "PC Card Standard".
Note.3) Indicated dimensions are symmetrical to the center of the card insertion slot.
A B C Weight
(mm) (mm) (mm) (g)
3 5.7 0.1 14.7
5.2 7.9 2.3 15.1
A9
sPCB mounting pattern
qStandard Type
qWithout standoff
(right button)
installed section
30 MIN
34.5 MIN
30 MIN
52.8±0.05
2 48.5MAX
qWithout standoff
(left button)
34.5 MIN
30 MIN
30 MAX
52.8±0.05
2 48.5MAX
installed section
4.75±0.05
54.75±0.05
card edge position
shielded board-pressed area
2-Ø2.2
+0.1
+0
4.75±0.05
54.75±0.05
card edge position
shielded board-pressed are
2-Ø2.2
+0.1
+0
3.05MIN
27.95MAX
34.5MIN
2 55.9MIN
2 59.5±0.05
2MIN
1
qStandoff 2.2mm
(common to both right and left buttons)
52.8±0.05
installed section
2MIN 3.05MIN
27.95MAX
34.5MIN
2 55.9MIN
2 59.5±0.05
47.5±0.05
54.75±0.05
card edge position
2 50.6MAX
2 56.85MAX
shielded board-
pressed area
parts installation-prohibited area
2MIN
3.05MIN
2 59.5MAX
2-Ø2.2
+0.1
+0
Note.1) area and area show the pattern-inhibited area.
However area will be the pattern-inhibited area only when guide unit is "IC11S-BD-PEJ✽".
Note.2) Indicated dimensions are symmetrical to the center of the card insertion slot.
A17
|
|||
页数 | 38 页 | ||
下载 | [ IC11S-68PL-1.27SF-EJR.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
IC11S-68PL-1.27SF-EJL | Single Slot SMT Connectors For Card-Bus Based PC Cards | Hirose |
IC11S-68PL-1.27SF-EJR | Single Slot SMT Connectors For Card-Bus Based PC Cards | Hirose |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |