|
|
零件编号 | PX50-AD4S | ||
描述 | Power Supply Connectors For Industrial Equipment | ||
制造商 | Hirose Electric | ||
LOGO | |||
1 Page
NEW
Power Supply Connectors For Industrial Equipment
PX Series
Structure prevents mis-insertion
Key
sFeatures
1. Power supply connector for high-current:
Withstands voltage of 2200V AC max. and 10A/contact
(60A/6contacts) of rated current.
2. Housing design prevents incorrect insertion:
Opening section is designed to prevent reverse insertion and
mating direction is easily checked.
Additionally, the opening section is keyed to prevent
misalignment of plugs in parallel applications. (See the right
Pict.➀.)
3. Reduced Size:
When compared to traditional products, Hirose’s plug is
smaller in size by 65% and the receptacle is smaller by 55%.
(For more details, refer to page 2.)
4. Reliable contact structure:
➀Three point contact
➁Gold plated contacts (standard) with high-level environmental
resistance
➂Contact spring guard structure
➃Structure prevents retainer deformation (Refer to the right
Fig.➀.)
5. Easy Cable Assembly:
➀Use of dedicated crimping tools will make harness work
easier.One tool crimps both AWG#16 and AWG#18 wire.
➁Positive lock can be felt on contact insertion.
➂Release of contact lock can easily be performed with
dedicated jig, which facilitates the wiring modification after
assembly.
Pict.-➀
Shape of opening prevents reverse insertion
Reliable terminal structure
retainer
Sealing section
(3 contacts)
Contact spring
guard section
Fig.-➀
As this window is opened, contact
section can easily be checked.
Wall structure prevents
retainer deformation
16-18
Applicable Wire Size (AWG No.)
Since the retainer portion is lowered
by onestep, the possibility of spring
deformation is minimized even if the
lock is released.
Avoid any
short between
adjacent
terminals
Two layer structure
enables high-density
mounting.
Label space
99.4 1
sCrimp Terminal Drawing Jig
PX50-SC-TC CL250-0233-1
<WARNING>
When the crimp terminal drawing jig is inserted and pushed from the fitting section of a connector as shown below, retainer lock of the
terminal will be released. Then please extract the cable. If the retainer is too lowered after extracting terminal, put it in a former position and
reinsert. Position and direction of the jig top to be inserted are as shown in the Figures below.
Be careful that any mistake will lead to the damage of terminal.
qHow To Extract Crimp Terminal
➀
➁
➂➃
✽ Insert the jig top into the peak of convex section on terminal hole.
Links to World Ele
HIROSE ELECTRIC CO.,LTD.
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8586,JAPAN
PHONE:3-3491-9741
FAX :3-3493-2933
The contents of this catalog are current as of April 1999. Contents are subject to change without notice for the purpose of improvements.
8
|
|||
页数 | 8 页 | ||
下载 | [ PX50-AD4S.PDF 数据手册 ] |
零件编号 | 描述 | 制造商 |
PX50-AD4S | Power Supply Connectors For Industrial Equipment | Hirose Electric |
零件编号 | 描述 | 制造商 |
STK15C88 | 256-Kbit (32 K x 8) PowerStore nvSRAM | Cypress Semiconductor |
NJM4556 | DUAL HIGH CURRENT OPERATIONAL AMPLIFIER | New Japan Radio |
EL1118-G | 5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER | Everlight |
DataSheet8.cn | 2020 | 联系我们 | 搜索 | Simemap |