DataSheet8.cn


PDF ( 数据手册 , 数据表 ) SMP100MC-200

零件编号 SMP100MC-200
描述 TRISIL FOR TELECOM EQUIPMENT PROTECTION
制造商 STMicroelectronics
LOGO STMicroelectronics LOGO 


1 Page

No Preview Available !

SMP100MC-200 数据手册, 描述, 功能
® SMP100MC
TRISIL™ FOR TELECOM EQUIPMENT PROTECTION
FEATURES
Bidirectional crowbar protection
Voltage: range from 120V to 270V
Low VBO / VR ratio
Micro capacitance from 20pF to 30pF @ 50V
Low leakage current : IR = 2µA max
Holding current: IH = 150 mA min
Repetitive peak pulse current :
IPP = 100 A (10/1000µs)
MAIN APPLICATIONS
Any sensitive equipment requiring protection
against lightning strikes and power crossing.
These devices are dedicated to central office pro-
tection as they comply with the most stressfull
standards.
Their Micro Capacitance make them suitable for
ADSL2+ and low end VDSL.
DESCRIPTION
The SMP100MC is a series of micro capacitance
transient surge arrestors designed for the protec-
tion of high debit rate communication equipment.
Its micro capacitance avoids any distortion of the
signal and is compatible with digital transmission
line cards (ADSL, VDSL, ISDN...).
Compatible with Cooper Bussmann fuse:
TCP 1.25A.
BENEFITS
Trisils are not subject to ageing and provide a fail
safe mode in short circuit for a better protection.
They are used to help equipment to meet main
standards such as UL60950, IEC950 / CSA C22.2
and UL1459. They have UL94 V0 approved resin.
SMB package is JEDEC registered (DO-214AA).
Trisils comply with the following standards GR-
1089 Core, ITU-T-K20/K21, VDE0433, VDE0878,
IEC61000-4-5 and FCC part 68.
SMB
(JEDEC DO-214AA)
Table 1: Order Codes
Part Number
SMP100MC-120
SMP100MC-140
SMP100MC-160
SMP100MC-200
SMP100MC-230
SMP100MC-270
Marking
ML12
ML14
ML16
ML20
ML23
ML27
Figure 1: Schematic Diagram
December 2004
REV. 1
1/10







SMP100MC-200 pdf, 数据表
SMP100MC
Figure 12: Test circuit 3 for dynamic IH parameter
R
VBAT = - 48 V
D.U.T
Surge generator
This is a GO-NOGO test which allows to confirm the holding current (IH) level in a
functional test circuit.
TEST PROCEDURE
1/ Adjust the current level at the IH value by short circuiting the AK of the D.U.T.
2/ Fire the D.U.T. with a surge current IPP = 10A, 10/1000µs.
3/ The D.U.T. will come back off-state within 50ms maximum.
Figure 13: Order Code
Trisil Surface Mount
Repetitive Peak Pulse Current
100 = 100A
Capacitance
MC = Micro Capacitance
Voltage
270 = 270V
SMP 100 MC - xxx
8/10














页数 10 页
下载[ SMP100MC-200.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
SMP100MC-200TRISIL FOR TELECOM EQUIPMENT PROTECTIONSTMicroelectronics
STMicroelectronics

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap