DataSheet8.cn


PDF ( 数据手册 , 数据表 ) VEA-7506

零件编号 VEA-7506
描述 Video Equalizing Amplifier with Clipping and Clamping
制造商 ETC
LOGO ETC LOGO 


1 Page

No Preview Available !

VEA-7506 数据手册, 描述, 功能
Video Clipping and Clamping DAsAnalog Video GearRossGear Ross Video
85
VCA-7010Leitch Compatible
VEA-7506GVG Compatible
Video Equalizing Amplifier with Clipping and Clamping
For use where clamping and white clipping is required in addition
to precision cable equalization.
The basic amplifier equalizes Belden 8281 cable but several versions for other cable types
are available at no extra charge.
The back porch clamping speed is adjustable. Fast mode offers excellent hum rejection
(>45 dB) while Normal mode provides good hum rejection (>33 dB) with superior immunity
to noise.
An adjustable white clipper is included to limit peak white signal excursions and protect the
following equipment from overload. Two clipping modes are available. Flat mode causes all
frequencies to be clipped equally. Luminance Only mode avoids clipping chroma. The clipper
is of an advanced design which maintains excellent signal linearity to within 1.5% of the
clipping point.
A differential input provides excellent rejection of input ground loop interference.
Temperature drift effects are almost non-existent due to the use of the latest in analog
ASICs combined with meticulous product engineering.
INPUT
GAIN
+/- 3 dB
0-500 FT
500-1000 FT
BACK
PORCH
CLAMP
EQUALIZER
EQ
FLAT
LUM ONLY
WHITE
CLIP
CLIP
OUTPUTS
1
2
3
4
5
6
6
8
7
8
• Precision equalization of up to
305m (1,000 ft.) of coax cable
• 8 outputs (6 output mode
selectable on the VEA-7506)
• Versions available for many
popular cable types
• White Clipper with hard and
soft modes
• Back porch clamping with
2 speeds
• Delay adjustable +/- 2 degrees
• Delay matched for precise
interchangeability
• Differential input with excellent
common-mode rejection
• Excellent isolation between
outputs
• Power to each card is
individually fused
• Superb technical specifications
• 5-year transferable warranty
• VCA-7010 is an alternative to
the Leitch VDP-683-CLP
• VCA-7010 fits Ross 7000 series
and Leitch 680 series frames
• VEA-7506 is an alternative
to the GVG 8506
• VEA-7506 fits Ross 7500 series
and GVG 8500/8800/8900 series
frames
2004 / 2005 RossGear and GearLite Terminal Equipment Catalog
Ross is a trademark of Ross Video Limited. Leitch is a trademark of Leitch Technology Corporation. GVG is a trademark of Thomson Multimedia.












页数 1 页
下载[ VEA-7506.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
VEA-7506Video Equalizing Amplifier with Clipping and ClampingETC
ETC

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap