DataSheet8.cn


PDF ( 数据手册 , 数据表 ) KH103

零件编号 KH103
描述 Fast Settling/ High Current Wideband Op Amp
制造商 Fairchild Semiconductor
LOGO Fairchild Semiconductor LOGO 


1 Page

No Preview Available !

KH103 数据手册, 描述, 功能
KH103
Fast Settling, High Current Wideband Op Amp
www.fairchildsemi.com
Features
s 80MHz full-power bandwidth (20Vpp, 100)
s 200mA output current
s 0.4% settling in 10ns
s 6000V/µs slew rate
s 4ns rise and fall times (20V)
s Direct replacement for CLC103
Applications
s Coaxial line driving
s DAC current to voltage amplifier
s Flash A to D driving
s Baseband and video communications
s Radar and IF processors
Small Signal Pulse Response
Typical Performance
General Description
The KH103 is a high-power, wideband op amp designed
for the most demanding high-speed applications. The
wide bandwidth, fast settling, linear phase, and very
low harmonic distortion provide the designer with
the signal fidelity needed in applications such as driving
flash A to Ds. The 80MHz full-power bandwidth and
200mA output current of the KH103 eliminate the
need for power buffers in most applications; the
KH103 is an excellent choice for driving large high-
speed signals into coaxial lines.
In the design of the KH103 special care was taken in
order to guarantee that the output settle quickly to
within 0.4% of the final value for use with ultra fast
flash A to D converters. This is one of the most
demanding of all op amp requirements since settling
time is affected by the op amps bandwidth, passband
gain flatness, and harmonic distortion. This high
degree of performance ensures excellent performance
in many other demanding applications as well.
The dynamic performance of the KH103 is based on a
current feedback topology that provides performance
far beyond that available from conventional op amp
designs. Unlike conventional op amps where optimum
gain-bandwidth product occurs at a high gain, minimum
settling time at a gain of -1, and maximum slew rate
at a gain of +1, the KH103 provides consistent
predictable performance across its entire gain range.
For example, the table below shows how the -3dB
bandwidth remain nearly constant over a wide range
of gains. And since the amplifier is inherently stable,
no external compensation is required. The result is
shorter design time and the ability to accommodate
design changes (in gain, for example) without loss of
performance or redesign of compensation circuits.
The KH103 is constructed using thin film resistor/
bipolar transistor technology, and is available in the
following versions:
KH103AI
KH103AK
KH103AM
-25°C to +85°C 24-pin Ceramic DIP
-55°C to +125°C 24-pin Ceramic DIP,
features burn-in and
hermetic testing
-55°C to +125°C 24-pin Ceramic DIP,
environmentally screened
and electronically tested
to MIL-STD-883
REV. 1A February 2001












页数 6 页
下载[ KH103.PDF 数据手册 ]


分享链接

Link :

推荐数据表

零件编号描述制造商
KH1002002LIQUID CRYSTAL DISPLAY MODULESGD
SGD
KH103Fast Settling/ High Current Wideband Op AmpFairchild Semiconductor
Fairchild Semiconductor
KH103High Current Wideband Op AmpCadeka
Cadeka
KH104DC to 1.1GHz Linear AmplifierFairchild Semiconductor
Fairchild Semiconductor

零件编号描述制造商
STK15C88256-Kbit (32 K x 8) PowerStore nvSRAMCypress Semiconductor
Cypress Semiconductor
NJM4556DUAL HIGH CURRENT OPERATIONAL AMPLIFIERNew Japan Radio
New Japan Radio
EL1118-G5 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLEREverlight
Everlight


DataSheet8.cn    |   2020   |  联系我们   |   搜索  |  Simemap